How do I find out the exact size of a graphic or image after it has a clipping mask applied in Illustrator CS4? When you just select the image or do Ctrl+A it shows the entire image size(including the masked unwanted portion) in the transform palette and I just need the final dimensions of the image. How I can find out what the masked image size is?
View 1 RepliesSometimes when I mask an image - or actually - mask a group of several complex images, when I release the mask it is impossible to ungroup the images. Is there a way to make masked groups but then not have that happen?
View 4 Replies View RelatedI'm using Illustrator CS5.
I have been given a problem that involves a group of objects and images that have been masked. When i duplicate the group, move it and make some changes, on reopen it seems some of the masked images are duplicated and appear in the original position before they were moved?
Although they are masked out they are obviously not good. These images also appear in the link panel without any thumbnails.
This is probably a really really simple question but I can't for the life of me find how I can find out an individual image size from multiple images on a canvas. eg I have 3 photos i want to arrange 1 large and the other two next to it half the size. How can I edit individual image size on the canvas as when I select the image on a sperate layer I want to resize it just resizes the entire canvas and not the individual image
View 4 Replies View Relatedid like to have her on a white background. im good all the way to the point where you use the 'move' tool to drag the masked image onto a white background ( which is a blank PS document saved in Jpeg). when i drag it over i end up with a huge close-up crop that fills the entire image of my white background so that you cant even see the white.
conversely, when i drag the white background over my mask i only get a small rectangular box of white that fails to cover the entire background area once i drag the background layer below the mask.
I have created a new layer mask of an image, but when I use the free transform tool to resize it so it is smaller, there is a faint grey outline left around the image. Why does this happen and how do I get rid of it?
View 15 Replies View RelatedI was given a complex children's logo (below) in AI format. When placing it in ID, I started getting resolution warnings. After some digging, it turns out that the person who created this used images instead of gradients for only some of the objects. I'm not sure why someone would do this instead of just creating the gradients in AI. However, I now need to find and replace all these images. Is there an easy way to locate the images?
View 3 Replies View RelatedIs there any way to find all instances of text in a document at a given point size i.e. all 6 pt. type? Possibly a script?
View 8 Replies View RelatedI have some difficulties uniting a bunch of layers and paths which are individually masked.
Hope this describes my problem: [URL] ....
When applying certain SVG filters to a group that contains an object with an opacity mask, that masked object disappears. AI_Dilate_3, for example.
View 1 Replies View RelatedHow do i check the final dimension of image or vector graphics when it is clipping masked in illustrator. If I check in transform it is showing the size including the clipping mask.. I just want to check final trim size of the image.....
View 7 Replies View RelatedI have a requirement in my project like, I have to shrink the images which are varies in size 100 KB to the 100 MB and files extensions are .jpg, .tif, .tiff and .eps and many more like 20 extensions
Need to:
1) Shrink the images with specific width 4 inch and height 4 to 5 inch @ 300 DPI
2) re name the images in order with commonly first name same for all the images
3) save them only .jpg
4) color format should be converted to CMYK only
How do you resize images to a specific size in inches in illustrator?
View 6 Replies View RelatedImages that are opened or psds that are imported are resized into an artboard that is smaller then the image. With raster image formats, the following behavior occurs:
For a jpg that is 1000x800px an artboard is opened at 1000x800px and an additional artboard at 360x288px with the actual raster image is created.
I am making a holiday greeting card. I have 16 very larged photo images "linked" (not embedded) into the card. The original images are very large (e.g. 4500 x 3000 px, 10mb) but I've placed them fairly small in the final card (only about 2" x 2" printed). Therefore, I likely don't need the full resolution of the original photos. I need to generate a final file that I can send to an online print shop, something that is ideally 10-25Mb in size, probably pdf. How to prepare the final file for export to pdf to generate as such? Right now, the final file is 275Mb because it is embedding the full size of each of the 16 images.
I'm on Illustrator CS6 on Mac.
I recently upgraded to Illustrator CS6, and suddenly clients have been remarking that the file sizes are wrong or there's "a ton of white space around the logo." I checked it out, and sure enough, it appears that whenever I export a file, it does not crop it to the image boundary like it used to, even if I had manually adjusted the artboard to fit closely around it. After a bit of trial and error, I discovered that I have to click "Use Artboards" on the Export dialog each time. The super annoying part is that it doesn't STAY checked, AND it adds a number to the end of the file name. So I often forget to check it (not used to the extra step in workflow), and if I make a modification to the file, I can't just export over the previous version. It requires me to export it, go find it in finder, and manually delete the extra number off the file name. The extra steps are adding way too much time when I'm saving out many files. I'm about ready to go back to my previous version just from this alone.
Is there an easier way to do this? It seems like the addition of this feature would only cause extra problems...
I'm using Illustrator to crop and arrange a number of raster images. However, I'm starting to have file management problems, because the Illustrator files quickly balloon in size.
Example: I got public domain jpg image of a deer off the Wikimedia Commons. This jpg image is 0.35MB. I opened up a new Illustrator document, placed and embedded the image, and saved the document (with the 'pdf compatible box' unchecked). The resulting Illustrator file is 7.7MB in size, over 20 times the size of the embedded jpg image.
I've looked around these forum, but other than the 'pdf compatible box', I couldn't find any good solutions. Is there some other option or preference that I could tweak? I need to use embedded images rather than links, but the files are getting out of control (>100MB).
The screen capture at the end of this post shows the situation. In the top folder in the screencapture, the image file is highlighted, so you can see the filesize. In the lower folder in the screencapture, the Illustrator file is highlighted, so you can see it's filesize. Then you can see the open Illustrator document on the right. (edit: the forum software is no longer allowing me to add images, so I've put the screencapture on Google Drive here: [URL]
The .ai file with the embedded image is here: [URL]
I'm using Illustrator CS6 64-bit, v16.0.3 on Windows 8-64.
i have around 500 eps formats images with different artboard size.
i need to resize the artboard to A4 size and the images to be placed in the centre of the artboard.
I am in the process of completing my Photographic website and need to make thumbnail and larger sizes for the the site. The site will have approximately 100 images on it. Clicking the thumbnails will connect to the larger images. How do I make both sizes in PS CS? Perhaps their is a generator that you would recommend for Mac 10.2?
View 3 Replies View RelatedTitle says it all. How to find the size of a selection in pixels in CC
View 9 Replies View RelatedUsing Inventors VBA, is it possible to get the sheet size of a idw drawing file (E.g. A0, A1, A2 etc)
View 1 Replies View RelatedEdit: Fastener size. Can't find a way to change that.
Our teacher left us with a problem and I can't really understand this. I'm reading through the book and there's basically little to no "how to do" or examples I can follow. We have to do a 2D drawing. It's a Flathead cap screw - 3/8 - 16 UNC 2A x 2.0 lg 1.0 grip
So far I know that 3/8(.375") is the major diameter, 16 is the threads per inch, 2A is the average with external thread, and 2.0 is the length. I pretty much don't know how to put it into a drawing..
Wow, I am trying to ask about the lack of fonts in Gimp 2.8.4, when I cannot find a font list or size list here on this document!
Edit/ Preferences states that the fonts are to be found in the following directories:
C:UsersHubert.gimp-2.8fonts
C:Program FilesGIMP 2sharegimp2.0fonts (note the '2.0')
The first one is empty, and the second one does not exist.
This problem has been mentioned on the internet, but no answer has yet been stated.
I don't know how to populate those spaces with fonts that can be used by Gimp.
DO YOU?
I have two satellite images that I am comparing to look for changes in topography between the two dates at which the images were taken. I was going to use the Layers Divide Mode, but the problem is that any brightness changes AND non-changes show up as white (the algorithm gimp uses is 256*Image1/(image2+1) ), so you can see if the pixels of image1 and 2 are the same, it'll give a pixel with value 256, and if image 1 has brighter pixel than image 2, it will give a value greater than 256...which gets converted back to 256. I've also looked into the Difference and Subtract modes, but they take absolute values or sets anything negative to 0, which skews my results. Basically, I'm wondering if there is something in gimp which will allow me to compare the two images, kind of like creating a ratio image in ENVI where darker colors stand for darkening over time, whiter colors stand for brightening, and greyish colors show non-changes. I want to divide one pixel value by the other, and use that value to create a new ratio image.
View 3 Replies View RelatedI have a scanner issue and wanted to load a psd to show the problem (600 almost looks better than 1200) but when I upload, it gets rejected. It's ~21 M.
Another issue re: scanners. Mine only has jpeg, bitmap, png and a few other file types. These are actual photographs and I'd like to scan them in RAW.
When looking for a font to use, a SAMPLE of font displays along side of the fonts list but in CS6 i can not find the Size option for the SAMPLE list, in other versions it use to be in preferences , is it a lost cause searching for it (no longer available in CS6).the sample is so small it's hard to see
View 7 Replies View Relatedwhere I could find models for Bar Size Channels. I can't find any in Content center, CBliss, or MFG Community member files.
View 2 Replies View RelatedIs there any better method to find the overall size of a part model? I tried Range Box method and that gives some inaccuracy if the model have loft feature and fillet on that. But if I use GetExistingFacets the size gives more accurate. At the same time in a round part model with a cut, the GetExistingFacets give inaccuracy and range box method gives better result. Below is the X, Y, Z sizes of the two models with the above mentioned methods.
Round Part (Part1)
Measured with GetExistingFacets method = 129.934196472168 x 126.422719955444 x 25
Measured with Range Box method = 130 x 126.514225996919 x 25
Rectangular Part (Part2)
Measured with GetExistingFacets method = 300 x 300 x 30.0000286102295
Measured with Range Box method = 300 x 300 x 30.4094903224854
find attached part models which I used.
I just migrated from PC to Mac and I can'd find my psd images.
View 1 Replies View RelatedI'm interested in identifying a set of pictures in a large catalog which have been edited. There's 44K images in the catalog.
Is there some way to make a collection of only the images that were modified in Lightroom? And conversely, only those images which were imported with no changes?
What can I do so Lightroom 2 can find my images in or on my Drobo?
I get a ? mark beside my folders.
When I click on a date the images pop up but @ the top of the images the words "offline or missing" appears.
(I had a virus and had to download LR 2. Now my images can't be found.)