I am on a PC - Windows 7...I recently upgraded fro PS 5.5 to Creative Cloud PS 14.0.2 x64
Â
I went in to associate my file types to open with the new version of PS..I go into the proper sub directory (CC) and find the .exe file..When I click on it it associates the file with my old version of PS.
All picture file formats have somehow become associated with Illustrator so that when I try to open a file in Photoshop from Bridge it opens in Illustrator instead. How can I re-associate all picture file formats with Photoshop?
View 3 Replies View RelatedWith Photoshop CS 6 the desktop does not recognize me and allows me to assign the correspondence file. For example, if I double click on a .psd file nothing happens. If I reconnect the program Photoshop to psd file manually, does not recognize it (as if I had not made ​​the selection). While Adobe Photoshop CS6 Bridge point for each matching file, the associates, but when I do a Bridge by double-clicking it, I go into Photoshop without opening the file.
Â
This means that I can no longer be Indesign edit a file with a simple click, but I have to go find the file at all times and I can only find it in Photoshop with a huge waste of time!
Just installed PSP X6 on windows 8 64 bit. When in file explorer, I click on pspimage file and it opens in X6 64 bit. I want it to open in 32 bit. I did the right click Open With/Choose default program trick to no avail. I also did the File/Preferences/File Format associations and selected PSP X6 32-bit but it still opens it in the 64 bit version.
Do I need to uninstall PSP and install it again minus the 64 bit version to get it to work? I don't use the 64 bit version much cause my plugins are 32 bit.
I've just upgraded from PSP X3 to X4. On my Windows 7 machine, I've had jpg files associated with Windows Photo viewer, but could always open PSP X3 to modify/view a jpg if necessary. Now with X4, the default install changed the jpg file association. (I don't like it when software does that.) I changed it back, and now when I start X4 and direct it to a folder of jpg files, they are listed, but without the thumbnail. If I change the file association back, the X4 starts displaying the thumbnail again.
View 3 Replies View RelatedI sometimes create parts that are very similar to one another. (ie. - complex plate, but one part uses threaded holes, while an identical one has through holes, with all holes in the same location). So before now I would have built one part, made my drawing file. Then Copy/paste the part file into the same assembly folder, edit the hole feature of the newly copied part, then have to create an entirely new drawing file for the new copied part.
Is there a way to just copy my already created part drawing, and then just change the part file it used? They are basically the same part, but one uses threaded holes, the other uses through holes. My current way seems redundant and time wasting.
I dont know why I lost the association of my files with photoshop. when I double click on an jpeg file it opens in windows in windows picture and fax viewer how can I go back to the way it was when everytime I click on and image file it opens photoshop in order to view it?
View 3 Replies View RelatedAfter installing cloud programs, Win "file associations" won't allow change to PS6.
View 4 Replies View Relatedhow can I get a .dwg file of point cloud, to work on the Revit?
View 1 Replies View RelatedI dont want it. Im not interested. But hey we are changing all your icons to cloud. Screw you I have to login and am scard these fools will use my credit card#
Â
Adobe is really good at graphics I dont trust them as far as I can throw them with my credit information.Why are you changing my desktop icons without my permission. Yea do whatever you want to. Down here in the south we have a little something called uninstall.
Illustrator crashed in the middle of working on a file. Looked around for a recovered file on the desktop. Nothing. Can't seem to find any option to set my Preferences for auto-save.
View 1 Replies View RelatedHow do I change the right click and edit association so a jpg opens for editing in CS6 instead of CS5 in Windows 7? I'd like to keep both programs installed and Windows no longer offers the ability to edit the "edit" association.
View 7 Replies View RelatedAny (simple) raw point cloud data file.
View 2 Replies View RelatedWhen attempting to launch the Render in Cloud feature in Revit 2014, the following error message is displayed:
Render in Cloud
A Problem occurred.
The file could not be translated.-1
When we use Point Cloud Feature Extraction for Autodesk® Revit® 2012 in our machine in a central file with the pcg file then there is a Run time error shown in revit. But if we work in a single file then the problem does not occur. How we ovecome this situation?
View 1 Replies View RelatedWe are trying to import Point Cloud files having extension .fls into Revit 2012 but are unable to do so. We have attached the screen shots of the messages that we are getting while importing. We have the trial version of Revit Architecture 2012 and need to import the files so that we can convert them to rvt files...
View 9 Replies View RelatedI'm hoping this could be a quick fix without completely reinstalling CAD.
I jammed too much LiDAR data into my Index file for point cloud data, and now I can not even open it. Â Even new drawings are trying to open the overall index with everything in it.
What I want to do is just delete the whole thing and start fresh again, but not sure how to do that. Â If I could open it once I could start deleting stuff from it, but it is too large to even open.
My surveyor gave me a Trimble .tsf point cloud file....how do I convert that dude to an AutoCAD .las file?
View 2 Replies View RelatedI dont mind drawings being automatically saved to the cloud, but by default I want to open drawings from the local folders. Is there a way to turn off the prompt asking whether to open a file from the cloud or locally?
View 9 Replies View RelatedWhen I try to index a Faro fls or fws file the process fails with the error message "Point Cloud File Indexing has Errors".
Civil 3D 2012
HP Z210
OS Windows 7 64 Bit
Core i7 16GB Ram
Illustrator CC keeps crashing every time I try to save a file. My Creative Cloud is up to date, and I have a brand new iMac with 8GB Ram and the latest operating system. The average file size I've been working with is around 4MB, so not very big. I also make sure that I have as few programs opened as possible while I'm working in AI.
Â
I've been talking to Apple Care every week, and even went back to the store to change my computer for a new one, but am still having problems.
I have Win 8 64-Bit (upgraded from Win 7 64-bit), Outlook 2013 (preview installed over Ourlook 2010) and PSE 10.
Â
When I try use the Share > Photo Mail I get an error message: "There is no email program associated to perform requsted action. Please install an email program or, if one is already installed, create an association in the Default Programs control panel."
Â
After I hit ok on the windows looking message box, I get a message in PSE: "Elements Organiser could not Finish creating your email Message. Please make sure that Microsoft Outlook is selected as the default email program in the Windows Internet Control Panel, and that all dialog boxes in Outlook are closed. If this is the first time you are using Microsoft Outlook, please run the Outlook applicaiton and complete its set-up process before sending mail through Elements Organizer. Alternatively, you can use the Adobe Email Service via the Elements Organiser Preferences Dialog.
Â
I have Elements preferences pointing to Outlook. When I switch the sharing preference to Windows mail, I get: "Elements Organiser could not Finish creating your email Message. Alternatively, you can use the Adobe Email Service via the Elements Organiser Preferences Dialog."
Â
I have checked the default programs, and Outlook 2013 has all associated file type and protocols pointed to it. (an dre-booted PC after resetting defaults)So either:
 - I am mising a fix relating to upgrading Win 7 64-bit with PSE10 to Win 8 64-bit or
 - PSE is looking for a particular protocol in the program defaults like MAILTO (but not this one as this is pointed to outlook) that is missing.
I'm using Inventor Pro 2011 and I'm trying to break the association of a BOM from it's assembly. My company uses a "next assembly list" on each drawing to show the quantities and information that appear on the BOM in the next level assembly. To achieve this we insert a parts list referencing the next level, then we turn off the visiblity of all the parts except the item we want shown. The problem we've found with this is that we're using some large assemblies and Inventor slows down when it has to reference the large assembly on each drawing.  All we really want to show is the single line.  If we break the link to the large assembly, we feel that it will speed up the process considerably.
View 5 Replies View RelatedHow do you Associate a dimension to a line using VB. I have not had any results searching for an example of this.
View 7 Replies View RelatedLR5 is showing many of my images as missing. When I point to the correct location, it says that that image is associated with another photo in the catalog. I cannot update it to the correct location. I have deleted the preview folder hoping a rebuild will fix this but it hasn't. I recently 'moved' 140 K + photos to new drives, that's when the problems showed up.
View 2 Replies View Relatedrather than each time i change layers having to fix layer and linetype to each other how do i more permenatly fix the two together?
View 1 Replies View Relatedfor no apparent reason I am suddenly unable to change the layer that a object is assigned to. Normally I select a line, then go to the layers pull down menu and click on the desired new layer. Automatically the line changes color to the selected layer.
When I follow this procedure now, the layer name changes in the pull down menu as if the change has been made, but the line remains the old color. Checking in Properties for this line, it shows that it has been changed to the new layer as well, however, when I reselect the line, the Properties changes back to show that it is still assigned to the old layer (color: By Layer is selected).
I removed Lightroom 5 previously installed from disc, and installed Lightroom 5 from the Cloud. The Keyword list is still displayed in the LHS panel, but the images have no Keywords associated with them. How can I re-instate the Keyword-image association?Â
View 7 Replies View RelatedI keep getting; "A cross part association has failed".
*I got a sheet metal part fixed by jletcher, got it in to the assembly (1), updated the associations and that worked fine.
*I then opened the assembly (2) that contains the assembly (1) and fixed the "cross part associations" this file seems to work after save and reopen.
So, when I open the MAIN assembly it complains about the same stuff. I have fixed it But as soon as i close the files for the day it complains about it again the next day. This seems to go on and on
I have created some some parts in the assembly (2) and projected a few edges to be able to create these parts.
Inventor 2012 Pro 64-Bit
Win 7 Pro
RAM 16 GB
I have a 2D plan and a 3D plan. The data is essentially the same on both, the only difference being that the 2D plan has several hundred points on it (all at elevation/z coordinate of 0, of which can easily be copied to the 3D plan).
I want to move those 2D points to their respective 3D positions. I.e. if point X is at coordinates 15213.321, 51646.632, 0 I would like to search in the Z direction above (or below; although in this data set it would always be above) for any object (line, polyline, 3dpolyline or an arc only I think) that crosses or is on this coordinate and then move the point (or place a new point) to that z coordinate. So if there is a line whose z value is 895.265 at coordinate 15213.321, 51646.632, then the point (that was originally 2D) would become 15213.321, 51646.632, 895.265.
Any lisp or other method in AutoCad that could accomplish this (ideally without having to select each point individually)? Surely this must have come up a few times before although I'm not too sure what search words to be using to look for info.
IÂ have a problem with Dimension association to any existing object in my drawings. If i draw anything new in the same drawing this problem does not occur. The leaders are also associating themselevs to these objects.
When i select a line, no grips appear even though if i draw a new line they do.
-I have tried to use DIMDISASSOCIATE the dimensions from the objsect to no avail.
-I have tried changing the DIMASSOC variable but this didnt work.
-I have tried exporting the objects to new files but still the same problem, only with the objects from this drawing.
It seems to have made every object associative. The only thing i can think that caused this was i pasted in a drawing from a pre 2002 Autocad version.