LR5 is showing many of my images as missing. When I point to the correct location, it says that that image is associated with another photo in the catalog. I cannot update it to the correct location. I have deleted the preview folder hoping a rebuild will fix this but it hasn't. I recently 'moved' 140 K + photos to new drives, that's when the problems showed up.
View 2 RepliesHow do I change the right click and edit association so a jpg opens for editing in CS6 instead of CS5 in Windows 7? I'd like to keep both programs installed and Windows no longer offers the ability to edit the "edit" association.
View 7 Replies View Relatedfor no apparent reason I am suddenly unable to change the layer that a object is assigned to. Normally I select a line, then go to the layers pull down menu and click on the desired new layer. Automatically the line changes color to the selected layer.
When I follow this procedure now, the layer name changes in the pull down menu as if the change has been made, but the line remains the old color. Checking in Properties for this line, it shows that it has been changed to the new layer as well, however, when I reselect the line, the Properties changes back to show that it is still assigned to the old layer (color: By Layer is selected).
I sometimes create parts that are very similar to one another. (ie. - complex plate, but one part uses threaded holes, while an identical one has through holes, with all holes in the same location). So before now I would have built one part, made my drawing file. Then Copy/paste the part file into the same assembly folder, edit the hole feature of the newly copied part, then have to create an entirely new drawing file for the new copied part.
Is there a way to just copy my already created part drawing, and then just change the part file it used? They are basically the same part, but one uses threaded holes, the other uses through holes. My current way seems redundant and time wasting.
I removed Lightroom 5 previously installed from disc, and installed Lightroom 5 from the Cloud. The Keyword list is still displayed in the LHS panel, but the images have no Keywords associated with them. How can I re-instate the Keyword-image association?Â
View 7 Replies View RelatedI get the message : the file does not have a program associated with it for performing this action.
Create an association in the default programs control panel
Â
I went to default programs control panel an did not see where you change anything ?And what do you change it to ? Not sure what they are telling me to do ?Â
How to use the color panel, but I'm wanting to change the blue of the sky without affecting any other blues in the photo.
Â
I've tried adjustment brush on the sky but the HSL panel doesn't affect the selection it affects everything, Is there a way to achieve this?
I am remaking a blurb book an I only want to change one image, I want to color correct it and keep the rest of the book intact. Also I need to change the text on one image.
View 1 Replies View RelatedHow to Undo image adjustments that are not the most recent change
View 27 Replies View RelatedWhen I change to process 2012 on an image that has been worked in 2010 I'm seeing a big change in the image, much brighter, less contrast. Any way to closely preserve the old look while updating the process?
Â
Also wondering what the new 2012 process brings to the image, aside from access to the new tools. Will I see a better (or just different) rendering of the image from older files?
I would like to change the default filename for the HTML pages produced by Lightroom 3 in the web gallery. Specifically, I would like to remove the string "_large" from the HTML filename, so it corresponds exactly to the image filename.
Â
Specifically, the URL by default is like this: [URL] ....
Â
and I would like it to be like this: [URL] ....
Â
I assume there is some way to make this change using the template editors, but I can't figure it out.
Currently looking at buying either Lightroom 4 or Elements 11 at home - can I change image resolution and merge/join photos along with the standard photo editing - would be using this app for my travel pics, family photos and photobooks?
View 2 Replies View RelatedI am running windows 7 64 bit. LR 4 worked fine. LR5 has the following (main) issues/bugs: Crashes when help - about system is clicked.
Â
Freezes on keyword changes and will not refresh or change keywords with newly selected image. Sometimes fixes with waiting a long time, sometimes only with restart of the program or optimization of database.Does not allow files to be rotated in full view, only in grid view.
Â
With the upgrade to 5.2 I hoped the above would be corrected. They have not, and now, as an added 'feature' I also have:During the same session, a previously exported image is re-exported with a new export in place of one or more of the newer exports. This happens despite the filmstrip or grid view     being in sync on choices and when I am certain that previously exported image is not selected in the current export.
Â
Further, the program does seem quite sluggish at times, though I have the program and database on seperate drives. I am thinking or will change over to working in previews to resolve that issue, meanwhile, the other issues are still in play.
All picture file formats have somehow become associated with Illustrator so that when I try to open a file in Photoshop from Bridge it opens in Illustrator instead. How can I re-associate all picture file formats with Photoshop?
View 3 Replies View RelatedI am on a PC - Windows 7...I recently upgraded fro PS 5.5 to Creative Cloud PS 14.0.2 x64
Â
I went in to associate my file types to open with the new version of PS..I go into the proper sub directory (CC) and find the .exe file..When I click on it it associates the file with my old version of PS.
With Photoshop CS 6 the desktop does not recognize me and allows me to assign the correspondence file. For example, if I double click on a .psd file nothing happens. If I reconnect the program Photoshop to psd file manually, does not recognize it (as if I had not made ​​the selection). While Adobe Photoshop CS6 Bridge point for each matching file, the associates, but when I do a Bridge by double-clicking it, I go into Photoshop without opening the file.
Â
This means that I can no longer be Indesign edit a file with a simple click, but I have to go find the file at all times and I can only find it in Photoshop with a huge waste of time!
Just installed PSP X6 on windows 8 64 bit. When in file explorer, I click on pspimage file and it opens in X6 64 bit. I want it to open in 32 bit. I did the right click Open With/Choose default program trick to no avail. I also did the File/Preferences/File Format associations and selected PSP X6 32-bit but it still opens it in the 64 bit version.
Do I need to uninstall PSP and install it again minus the 64 bit version to get it to work? I don't use the 64 bit version much cause my plugins are 32 bit.
I'm using Inventor Pro 2011 and I'm trying to break the association of a BOM from it's assembly. My company uses a "next assembly list" on each drawing to show the quantities and information that appear on the BOM in the next level assembly. To achieve this we insert a parts list referencing the next level, then we turn off the visiblity of all the parts except the item we want shown. The problem we've found with this is that we're using some large assemblies and Inventor slows down when it has to reference the large assembly on each drawing.  All we really want to show is the single line.  If we break the link to the large assembly, we feel that it will speed up the process considerably.
View 5 Replies View RelatedHow do you Associate a dimension to a line using VB. I have not had any results searching for an example of this.
View 7 Replies View RelatedI've just upgraded from PSP X3 to X4. On my Windows 7 machine, I've had jpg files associated with Windows Photo viewer, but could always open PSP X3 to modify/view a jpg if necessary. Now with X4, the default install changed the jpg file association. (I don't like it when software does that.) I changed it back, and now when I start X4 and direct it to a folder of jpg files, they are listed, but without the thumbnail. If I change the file association back, the X4 starts displaying the thumbnail again.
View 3 Replies View Relatedrather than each time i change layers having to fix layer and linetype to each other how do i more permenatly fix the two together?
View 1 Replies View RelatedI keep getting; "A cross part association has failed".
*I got a sheet metal part fixed by jletcher, got it in to the assembly (1), updated the associations and that worked fine.
*I then opened the assembly (2) that contains the assembly (1) and fixed the "cross part associations" this file seems to work after save and reopen.
So, when I open the MAIN assembly it complains about the same stuff. I have fixed it But as soon as i close the files for the day it complains about it again the next day. This seems to go on and on
I have created some some parts in the assembly (2) and projected a few edges to be able to create these parts.
Inventor 2012 Pro 64-Bit
Win 7 Pro
RAM 16 GB
I have a 2D plan and a 3D plan. The data is essentially the same on both, the only difference being that the 2D plan has several hundred points on it (all at elevation/z coordinate of 0, of which can easily be copied to the 3D plan).
I want to move those 2D points to their respective 3D positions. I.e. if point X is at coordinates 15213.321, 51646.632, 0 I would like to search in the Z direction above (or below; although in this data set it would always be above) for any object (line, polyline, 3dpolyline or an arc only I think) that crosses or is on this coordinate and then move the point (or place a new point) to that z coordinate. So if there is a line whose z value is 895.265 at coordinate 15213.321, 51646.632, then the point (that was originally 2D) would become 15213.321, 51646.632, 895.265.
Any lisp or other method in AutoCad that could accomplish this (ideally without having to select each point individually)? Surely this must have come up a few times before although I'm not too sure what search words to be using to look for info.
IÂ have a problem with Dimension association to any existing object in my drawings. If i draw anything new in the same drawing this problem does not occur. The leaders are also associating themselevs to these objects.
When i select a line, no grips appear even though if i draw a new line they do.
-I have tried to use DIMDISASSOCIATE the dimensions from the objsect to no avail.
-I have tried changing the DIMASSOC variable but this didnt work.
-I have tried exporting the objects to new files but still the same problem, only with the objects from this drawing.
It seems to have made every object associative. The only thing i can think that caused this was i pasted in a drawing from a pre 2002 Autocad version.
How can I sort  an association list?
for example:
(setq lst '((1 . "s") (12 . "t") (-7 . "u") (0 . "v")))
 should be sorted as:
((-7 . "u") (0 . "v") (1 . "s") (12 . "t"))
 { sort on: (car(assoc index lst)) value}
I have Win 8 64-Bit (upgraded from Win 7 64-bit), Outlook 2013 (preview installed over Ourlook 2010) and PSE 10.
Â
When I try use the Share > Photo Mail I get an error message: "There is no email program associated to perform requsted action. Please install an email program or, if one is already installed, create an association in the Default Programs control panel."
Â
After I hit ok on the windows looking message box, I get a message in PSE: "Elements Organiser could not Finish creating your email Message. Please make sure that Microsoft Outlook is selected as the default email program in the Windows Internet Control Panel, and that all dialog boxes in Outlook are closed. If this is the first time you are using Microsoft Outlook, please run the Outlook applicaiton and complete its set-up process before sending mail through Elements Organizer. Alternatively, you can use the Adobe Email Service via the Elements Organiser Preferences Dialog.
Â
I have Elements preferences pointing to Outlook. When I switch the sharing preference to Windows mail, I get: "Elements Organiser could not Finish creating your email Message. Alternatively, you can use the Adobe Email Service via the Elements Organiser Preferences Dialog."
Â
I have checked the default programs, and Outlook 2013 has all associated file type and protocols pointed to it. (an dre-booted PC after resetting defaults)So either:
 - I am mising a fix relating to upgrading Win 7 64-bit with PSE10 to Win 8 64-bit or
 - PSE is looking for a particular protocol in the program defaults like MAILTO (but not this one as this is pointed to outlook) that is missing.
The association between design speed (V) and radius of circular curve (R),
As the R is positively related to V according to the equation (attached), then I expect that the C3D changes R value as the value of V is changed.
For example, on the attached screenshots, the R value of horizontal alignment is built based on a design speed of 100km/hr. Now if the speed is changed to 50km/hr, then why the value of R is not automatically changed to be compatible with the new speed?
I’m a long time Photoshop user but recently picked up LR4 to try to fine tune my workflow. I’ve noticed that after importing new files (RAW, I haven’t tried with jpg) into my library as I scroll through them (1-up, not in grid) the preview comes up and then after a second or so the WB changes to a much colder image.Â
Â
Does LR4 initially preview at specific settings and then change to the individual image settings? Even if so, the final images seem very cool and I feel like I have to up the temp more than I should have to. My previous workflow was to sort in Bridge and then use ACR to import to Photoshop. I feel like I did much less tweaking of my WB this way. I feel like I’m starting from square one with LR4.Â
presuming I have a selection set of different entities, that might have different linewight.
The code that is responsible for this property is 370
370Lineweight enum value. Stored and moved around as a 16-bit integer.not omitted from here Â
I need to make all of the entities have the same layer, and to make sure the each entity has the "ByLayer" lineweight.
The problem that I encountered, is the lineweight changement.
This is the colution that I came with, but it doesn't work for me:
(defun c:test () (setq en (car (entsel))) (setq el (entget en)) (setq el1 '()) (setq indx -1) (repeat (length el) (setq indx (1+ indx)) (if (/= (nth indx el) (assoc 370 el)) (setq el1 (cons (nth indx el) el1)) ) ) (setq el el1) (entmod el) (princ) )
 Having tested it in different ways, it looks like at the end, el1 represents the association list that I want my object to have, but it doesn't want to update.
I want to do a simple thing : drop ortho-photo on surface generated from contour line.
First thing, I need the basic terrain. I did import my contour line in a new draw, using the import map feature. I then saved the draw under the name " topo ". At this point, the contour line are 2D break line with no elevation.
I then opened a new draw to which I did associate my draw " topo ". Then I used a query to modify the elevation of the line using the attribute " contour " in my table, thus resulting in my breakline to become 3-D. It works fine. Then I save the new draw as " 3D_Topo ". I then get a warning :
" The association between objects interogated in the current drawing and associated will be deleted once the current document of the draw is closed " (I made the translation from french to english, in french it stated like this :  " L'association entre des objets interrogés dans des dessins courants et associés sera supprimée une fois le fichier de dessin courant fermé. " ).Â
Well question #1 : What does this warning mean / imply ?Â
Then, I have those .ecw files as ortho photo which I want to import. So I use the function " connect " with raster image, then I select my file, then I " add to draw ".... then something very strange happens.Â
Sometime, the image appears correctly...and some other times I get nothing and I get this " disconnected " message in the task pane ..and no matter how many time I actually connect again the .ecw files, it will not happen in the draw ! Then I simply close the draw, start map 3D again, then I do the exact same thing, and sometime it works, sometime it doesn't.Â
Question #2 : any clue on why the .ecw files sometime works, sometime doesn't?Â
Now, let's assume I finally made it to connect correctly and that Map3d didn't crash whilst I was doing it (because I don't know for you, but here, it does happens quit often), I now have (as shows in the picture I attached) two thing. A surface made (well, I went back in the civil 3-D module to make the actual surface from the breakline definition) with the contour line and a imported image. I now want to drap the image on my surface! So I use the option " drap " which is in the surfaces option (in the ribbon surface tools)... well it looks nice since it propose me to use the surface I made up with the contour line as the base and the imported .ecw files as the file to be draped upon. So I simply do that and.... well...nothing happens! My image isn't draped at all, it stays there, Â
Question #3 : How should I proceed to actually drap my image over my surface ?Â
Question #4 : Considering I made it to drap the surface, how can I save this new draw independently of the attached other draw or database?
I need to build an association list with nested association lists.
Here is my current
(IF (SETQ SUBLST (ASSOC CATEGORY PLNTLST))(PROGN (SETQ PLNTS (CONS PLANTNAME (LIST(CONS 'SIZE (dict-get PLANTNAME "SIZE"))(CONS 'COLOR (dict-get PLANTNAME "COLOR"))(CONS 'QTY (dict-get CATEGORY PLANTNAME))) ) PLNTLST (cons PLNTS SUBLST) ))(SETQ PLNTS (CONS PLANTNAME (LIST (CONS 'SIZE (dict-get PLANTNAME "SIZE")) (CONS 'COLOR (dict-get PLANTNAME "COLOR")) (CONS 'QTY (dict-get CATEGORY PLANTNAME)) ))PLNTLST (CONS CATEGORY PLNTS)))
[code]....