Photoshop :: File Association

Aug 18, 2009

 All picture file formats have somehow become associated with Illustrator so that when I try to open a file in Photoshop from Bridge it opens in Illustrator instead. How can I re-associate all picture file formats with Photoshop?   

View 3 Replies


ADVERTISEMENT

Photoshop :: File Association With Cloud

Oct 10, 2013

I am on a PC - Windows 7...I recently upgraded fro PS 5.5 to Creative Cloud PS 14.0.2 x64
 
I went in to associate my file types to open with the new version of PS..I go into the proper sub directory (CC) and find the .exe file..When I click on it it associates the file with my old version of PS.

View 1 Replies View Related

Photoshop :: CS6 - Bad Association Of File Types?

May 17, 2012

With Photoshop CS 6 the desktop does not recognize me and allows me to assign the correspondence file. For example, if I double click on a .psd file nothing happens. If I reconnect the program Photoshop to psd file manually, does not recognize it (as if I had not made ​​the selection). While Adobe Photoshop CS6 Bridge point for each matching file, the associates, but when I do a Bridge by double-clicking it, I go into Photoshop without opening the file.
 
This means that I can no longer be Indesign edit a file with a simple click, but I have to go find the file at all times and I can only find it in Photoshop with a huge waste of time!

View 14 Replies View Related

Paint Shop Pro :: X6 Can't Set File Association

Sep 17, 2013

Just installed PSP X6 on windows 8 64 bit. When in file explorer, I click on pspimage file and it opens in X6 64 bit. I want it to open in 32 bit. I did the right click Open With/Choose default program trick to no avail. I also did the File/Preferences/File Format associations and selected PSP X6 32-bit but it still opens it in the 64 bit version.

Do I need to uninstall PSP and install it again minus the 64 bit version to get it to work? I don't use the 64 bit version much cause my plugins are 32 bit.

View 11 Replies View Related

Paint Shop Pro :: JPG File Association Breaks X4

Jan 9, 2012

I've just upgraded from PSP X3 to X4. On my Windows 7 machine, I've had jpg files associated with Windows Photo viewer, but could always open PSP X3 to modify/view a jpg if necessary. Now with X4, the default install changed the jpg file association. (I don't like it when software does that.) I changed it back, and now when I start X4 and direct it to a folder of jpg files, they are listed, but without the thumbnail. If I change the file association back, the X4 starts displaying the thumbnail again.

View 3 Replies View Related

AutoCAD Inventor :: Change Drawing File Part Association?

Dec 1, 2009

I sometimes create parts that are very similar to one another. (ie. - complex plate, but one part uses threaded holes, while an identical one has through holes, with all holes in the same location). So before now I would have built one part, made my drawing file. Then Copy/paste the part file into the same assembly folder, edit the hole feature of the newly copied part, then have to create an entirely new drawing file for the new copied part.

Is there a way to just copy my already created part drawing, and then just change the part file it used? They are basically the same part, but one uses threaded holes, the other uses through holes. My current way seems redundant and time wasting.

View 9 Replies View Related

Photoshop :: File Association With Photoshop

Nov 26, 2006

I dont know why I lost the association of my files with photoshop. when I double click on an jpeg file it opens in windows in windows picture and fax viewer how can I go back to the way it was when everytime I click on and image file it opens photoshop in order to view it?

View 3 Replies View Related

Photoshop :: How To Change Right Click And Edit Association

May 16, 2012

How do I change the right click and edit association so a jpg opens for editing in CS6 instead of CS5 in Windows 7? I'd like to keep both programs installed and Windows no longer offers the ability to edit the "edit" association.

View 7 Replies View Related

Photoshop Elements :: Photo Mail Can't Find Email Association

Jan 19, 2013

I have Win 8 64-Bit (upgraded from Win 7 64-bit), Outlook 2013 (preview installed over Ourlook 2010) and PSE 10.
 
When I try use the Share > Photo Mail I get an error message: "There is no email program associated to perform requsted action. Please install an email program or, if one is already installed, create an association in the Default Programs control panel."
 
After I hit ok on the windows looking message box, I get a message in PSE: "Elements Organiser could not Finish creating your email Message. Please make sure that Microsoft Outlook is selected as the default email program in the Windows Internet Control Panel, and that all dialog boxes in Outlook are closed. If  this is the first time you are using Microsoft Outlook, please run the Outlook applicaiton and complete its set-up process before sending mail through Elements Organizer. Alternatively, you can use the Adobe Email Service via the Elements Organiser Preferences Dialog.
 
I have Elements preferences pointing to Outlook. When I switch the sharing preference to Windows mail, I get: "Elements Organiser could not Finish creating your email Message. Alternatively, you can use the Adobe Email Service via the Elements Organiser Preferences Dialog."
 
I have checked the default programs, and Outlook 2013 has all associated file type and protocols pointed to it. (an dre-booted PC after resetting defaults)So either:

  - I am mising a fix relating to upgrading Win 7 64-bit with PSE10 to Win 8 64-bit or
  - PSE is looking for a particular protocol in the program defaults like MAILTO (but not this one as this is pointed to outlook) that is missing.

View 2 Replies View Related

AutoCAD Inventor :: Break Association To BOM?

Aug 21, 2013

I'm using Inventor Pro 2011 and I'm trying to break the association of a BOM from it's assembly.  My company uses a "next assembly list" on each drawing to show the quantities and information that appear on the BOM in the next level assembly.  To achieve this we insert a parts list referencing the next level, then we turn off the visiblity of all the parts except the item we want shown.  The problem we've found with this is that we're using some large assemblies and Inventor slows down when it has to reference the large assembly on each drawing.  All we really want to show is the single line.  If we break the link to the large assembly, we feel that it will speed up the process considerably.

View 5 Replies View Related

AutoCAD .NET :: Dimension Association To A Line With VB

Jun 19, 2012

How do you Associate a dimension to a line using VB. I have not had any results searching for an example of this.

View 7 Replies View Related

Lightroom :: Can't Change Image Association In LR5

Dec 18, 2013

LR5 is showing many of my images as missing.  When I point to the correct location, it says that that image is associated with another photo in the catalog. I cannot update it to the correct location.  I have deleted the preview folder hoping a rebuild will fix this but it hasn't. I recently 'moved' 140 K + photos to new drives, that's when the problems showed up.

View 2 Replies View Related

AutoCAD 2013 :: How To Fix Association Of Layer And Linetype

Sep 20, 2012

rather than each time i change layers having to fix layer and linetype to each other how do i more permenatly fix the two together?

View 1 Replies View Related

AutoCad :: Cannot Change Any Object Layer Association

Feb 16, 2012

for no apparent reason I am suddenly unable to change the layer that a object is assigned to. Normally I select a line, then go to the layers pull down menu and click on the desired new layer. Automatically the line changes color to the selected layer.

When I follow this procedure now, the layer name changes in the pull down menu as if the change has been made, but the line remains the old color. Checking in Properties for this line, it shows that it has been changed to the new layer as well, however, when I reselect the line, the Properties changes back to show that it is still assigned to the old layer (color: By Layer is selected).

View 3 Replies View Related

Lightroom :: Keyword Association With Images Lost

Dec 5, 2013

I removed Lightroom 5 previously installed from disc, and installed Lightroom 5 from the Cloud. The Keyword list is still displayed in the LHS panel, but the images have no Keywords associated with them. How can I re-instate the Keyword-image association? 

View 7 Replies View Related

AutoCAD Inventor :: Keep Getting (A Cross Part Association Has Failed)

Oct 2, 2012

I keep getting; "A cross part association has failed".

*I got a sheet metal part fixed by jletcher, got it in to the assembly (1), updated the associations and that worked fine.
*I then opened the assembly (2) that contains the assembly (1) and fixed the "cross part associations" this file seems to work after save and reopen.

So, when I open the MAIN assembly it complains about the same stuff. I have fixed it But as soon as i close the files for the day it complains about it again the next day. This seems to go on and on

I have created some some parts in the assembly (2) and projected a few edges to be able to create these parts.

Inventor 2012 Pro 64-Bit
Win 7 Pro
RAM 16 GB

View 1 Replies View Related

AutoCad :: Moving 2D Object To 3D Position Through Association / Searching

Dec 20, 2011

I have a 2D plan and a 3D plan. The data is essentially the same on both, the only difference being that the 2D plan has several hundred points on it (all at elevation/z coordinate of 0, of which can easily be copied to the 3D plan).

I want to move those 2D points to their respective 3D positions. I.e. if point X is at coordinates 15213.321, 51646.632, 0 I would like to search in the Z direction above (or below; although in this data set it would always be above) for any object (line, polyline, 3dpolyline or an arc only I think) that crosses or is on this coordinate and then move the point (or place a new point) to that z coordinate. So if there is a line whose z value is 895.265 at coordinate 15213.321, 51646.632, then the point (that was originally 2D) would become 15213.321, 51646.632, 895.265.

Any lisp or other method in AutoCad that could accomplish this (ideally without having to select each point individually)? Surely this must have come up a few times before although I'm not too sure what search words to be using to look for info.

View 5 Replies View Related

AutoCAD 2010 :: Dimension Association To Any Existing Object In Drawings

Jan 23, 2013

I have a problem with Dimension association to any existing object in my drawings. If i draw anything new in the same drawing this problem does not occur. The leaders are also associating themselevs to these objects.

When i select a line, no grips appear even though if i draw a new line they do.

-I have tried to use DIMDISASSOCIATE the dimensions from the objsect to no avail.
-I have tried changing the DIMASSOC variable but this didnt work.
-I have tried exporting the objects to new files but still the same problem, only with the objects from this drawing.

It seems to have made every object associative. The only thing i can think that caused this was i pasted in a drawing from a pre 2002 Autocad version.

View 9 Replies View Related

AutoCAD Visual LISP / AutoLISP :: How To Sort Association List

Jun 14, 2013

How can I sort  an association list?

for example:
(setq lst '((1 . "s") (12 . "t") (-7 . "u") (0 . "v")))
 should be sorted as:
((-7 . "u") (0 . "v") (1 . "s") (12 . "t"))
 { sort on: (car(assoc index lst)) value}

View 9 Replies View Related

Lightroom :: Create Association In Default Programs Control Panel?

Feb 10, 2013

I get the message : the file does not have a program associated with it for performing this action.

Create an association in the default programs control panel
 
I went to default programs control panel an did not see where you change anything ?And what do you change it to ? Not sure what they are telling me to do ? 

View 4 Replies View Related

AutoCAD Civil 3D :: Association Between Design Speed (V) And Radius Of Circular Curve (R)

Aug 1, 2013

The association between design speed (V) and radius of circular curve (R),

As the R is positively related to V according to the equation (attached), then I expect that the C3D changes R value as the value of V is changed.

For example, on the attached screenshots, the R value of horizontal alignment is built based on a design speed of 100km/hr. Now if the speed is changed to 50km/hr, then why the value of R is not automatically changed to be compatible with the new speed?

View 6 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Retrieving Entry From Entity Association List

Nov 13, 2013

presuming I have a selection set of different entities, that might have different linewight.

The code that is responsible for this property is 370

370Lineweight enum value. Stored and moved around as a 16-bit integer.not omitted from here  

I need to make all of the entities have the same layer, and to make sure the each entity has the "ByLayer" lineweight.

The problem that I encountered, is the lineweight changement.

This is the colution that I came with, but it doesn't work for me:

(defun c:test () (setq en (car (entsel))) (setq el (entget en)) (setq el1 '()) (setq indx -1) (repeat (length el) (setq indx (1+ indx)) (if (/= (nth indx el) (assoc 370 el)) (setq el1 (cons (nth indx el) el1)) ) ) (setq el el1) (entmod el) (princ) )

 Having tested it in different ways, it looks like at the end, el1 represents the association list that I want my object to have, but it doesn't want to update.

View 9 Replies View Related

AutoCAD Map 3D :: Drop Ortho-photo On Surface Generated From Contour Line - Multiple Association

Nov 5, 2013

I want to do a simple thing : drop ortho-photo on surface generated from contour line.

First thing, I need the basic terrain. I did import my contour line in a new draw, using the import map feature. I then saved the draw under the name " topo ". At this point, the contour line are 2D break line with no elevation.

I then opened a new draw to which I did associate my draw " topo ". Then I used a query to modify the elevation of the line using the attribute " contour " in my table, thus resulting in my breakline to become 3-D. It works fine. Then I save the new draw as " 3D_Topo ". I then get a warning :

" The association between objects interogated in the current drawing and associated will be deleted once the current document of the draw is closed " (I made the translation from french to english, in french it stated like this :  " L'association entre des objets interrogés dans des dessins courants et associés sera supprimée une fois le fichier de dessin courant fermé. " ). 

Well question #1 : What does this warning mean / imply ? 

Then, I have those .ecw files as ortho photo which I want to import. So I use the function " connect " with raster image, then I select my file, then I " add to draw ".... then something very strange happens. 

Sometime, the image appears correctly...and some other times I get nothing and I get this " disconnected " message in the task pane ..and no matter how many time I actually connect again the .ecw files, it will not happen in the draw ! Then I simply close the draw, start map 3D again, then I do the exact same thing, and sometime it works, sometime it doesn't. 

Question #2 : any clue on why the .ecw files sometime works, sometime doesn't? 

Now, let's assume I finally made it to connect correctly and that Map3d didn't crash whilst I was doing it (because I don't know for you, but here, it does happens quit often), I now have (as shows in the picture I attached) two thing. A surface made (well, I went back in the civil 3-D module to make the actual surface from the breakline definition) with the contour line and a imported image. I now want to drap the image on my surface! So I use the option " drap " which is in the surfaces option (in the ribbon surface tools)... well it looks nice since it propose me to use the surface I made up with the contour line as the base and the imported .ecw files as the file to be draped upon. So I simply do that and.... well...nothing happens! My image isn't draped at all, it stays there,  

Question #3 : How should I proceed to actually drap my image over my surface ? 

Question #4 : Considering I made it to drap the surface, how can I save this new draw independently of the attached other draw or database?

View 5 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Build Association list With Nested Association Lists

Sep 27, 2013

I need to build an association list with nested association lists.

Here is my current
(IF (SETQ SUBLST (ASSOC CATEGORY PLNTLST))(PROGN (SETQ PLNTS (CONS PLANTNAME (LIST(CONS 'SIZE (dict-get PLANTNAME "SIZE"))(CONS 'COLOR (dict-get PLANTNAME "COLOR"))(CONS 'QTY (dict-get CATEGORY PLANTNAME))) ) PLNTLST (cons PLNTS SUBLST) ))(SETQ PLNTS (CONS PLANTNAME (LIST (CONS 'SIZE (dict-get PLANTNAME "SIZE")) (CONS 'COLOR (dict-get PLANTNAME "COLOR")) (CONS 'QTY (dict-get CATEGORY PLANTNAME)) ))PLNTLST (CONS CATEGORY PLNTS)))
[code]....

View 8 Replies View Related

Photoshop :: Paint Cannot Read File - Not A Valid Bitmap File Or Its Format Not Currently Supported?

May 25, 2013

Have some photos of a warehouse fire in Plymouth Indiana.  Files were saved as .jpg  Can't get them to open.
 
One message is "Pain't cannot read this file.  This is not a valid bitmap file or it's format is not currently supported."  Couldn’t display DSC-0023.jpg because a suitable graphics importer could not be found.
 
Carl Beason
Windows 7, Photoshop cs4

View 10 Replies View Related

Photoshop :: File Info Function (from File Menu Or Key Shortcut) Shows Only Empty Box

Jun 23, 2013

file info in Photoshop shows only an empty box yet works in bridge.

View 1 Replies View Related

Photoshop :: Unable To Start CS6 - Couldn't Open Scratch File Because File Is Locked

May 19, 2012

When I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6.  Photoshop would give me an error about "could not open a scratch file because the file is locked.  If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere.  After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer.  In my case the user that I was logged in with did not have access to write to the root of the C: drive.  Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
 
I first had to give the user that I was logged on with write permissions to the root of the C: drive.  Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file.  To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.

View 93 Replies View Related

Photoshop :: Save PSD File Of Social Icons To Separate PNG Image Files For Each File?

Jun 26, 2012

Save PSD File of Social Icons to Separate PNG image files for each file

View 7 Replies View Related

Photoshop Elements :: 11 - Making Photo Collage / File Was Not A Valid Frame File

Jan 5, 2013

Elements11: Trying to make a photo collage, but get the message : "Could not complete your request because the file was not a valid frame file". What does that mean? I follow the instructions given how to make a collage, but it comes to a halt when I try to import the pictures to the collage.

View 2 Replies View Related

Photoshop Elements :: What Camera Raw File Is Required To Open NEF File From D5100 In PSE7

Jul 15, 2013

Everything I read says its version 6.4, but when I attempt to run the 6.4 patch I get the message that it does not apply? Has Adobe prevented PSE7 from opening .NEF files from the D5100 (without conversion) in an effort to force paid upgrades to the current PSE version?

View 4 Replies View Related

Photoshop :: Could Not Place Document Because No Parser Or File Format Can Open The File?

May 30, 2012

I am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
 
Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
 
The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. try out the new features of CS6 for video editing.
 
I am running a 27" iMac with 12gb RAM and 1gb of Video RAM.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved