When a customer asks for a logo, what do you do? What do you need to know to make it?
Do you give them a template such as:
Company Name:
Colors:
Etc:
Basically, what do you need to know to make somone a logo (or design in general) and how do you get that information? After you get the information how to you continue with the project?
I think I'm in over my head here. I did a logo for a company in Photoshop CS (it was an ad agency that contracted me so no direct contact with client). Just some text and clip art, nothing fancy. I've sent off the layered file in .psd format. Now they want .eps format. I know you can save as .eps format in photoshop, but there's lots of different options.
Photoshop EPS
Photoshop DCS 1.0 [*eps]
Photoshop DCS 2.0 [*eps]
Other options are
Preview - TIFF (1 bit/pixel) or Tiff (8 bit/pixel)
Encoding - ASCII85, ASCII or Binary. Or JPEG low medium or high.
Include Halftone Screen - yes or no
Include TransferFunction - yes or no
PostScript Color Management - yes or no
Image Interpolation - yes or no
No clue what I need to select here. Is this dependent upon the print shop specifications? Or is there a typical EPS setting I should choose and be done with it?
I did a logo for a company in Photoshop CS (it was an ad agency that contracted me so no direct contact with client). Just some text and clip art, nothing fancy. I've sent off the layered file in .psd format. Now they want .eps format. I know you can save as .eps format in photoshop, but there's lots of different options.
Photoshop EPS
Photoshop DCS 1.0 [*eps]
Photoshop DCS 2.0 [*eps]
Other options are
Preview - TIFF (1 bit/pixel) or Tiff (8 bit/pixel)
Encoding - ASCII85, ASCII or Binary. Or JPEG low medium or high.
Include Halftone Screen - yes or no
Include TransferFunction - yes or no
PostScript Color Management - yes or no
Image Interpolation - yes or no
what I need to select here. Is this dependent upon the print shop specifications? Or is there a typical EPS setting I should choose and be done with it?
I recently needed to reinstall windows xp. I have saved everything I needed to reinstall all my software. My photoshop CS2 is the only problem I've had. Since it was an upgrade my installation pkge is looking for a previous version. I have the serial number, original reciept, confirmation number, case number and all other materials needed including a challeng code given to me 2 years ago when I upgraded. After 3 hours and being kicked from Customer Service to Tech support over and over with a hold time of 15 minutes in between each one I was finally fed up. Each person tried the same thing. Ctrl/Shift/Dbl Click which does not work. They agree my serial number is correct, they can see my purchase from the order number on my original reciept, but not one could give me a straight answer. They all kept asking the same questions over and over but none made sense. Honestly I don't think there was a language issue either. The last one actually said I should upgrade to CS4..... how could I upgrade that if I can't even upgrade to CS2 on my computer. I have totally lost respect for the Adobe system of support. I have 3 Adobe programs and I am waiting for the day I need support on those. If anyone has any suggestions for me I'd love to hear them. They would not give me any help other than to say I must have a previous version loaded before I can load an upgrade.....NO kidding! But even though I paid and they see I paid for an upgrade in the past....they cannot come to the conclusion that the previous version would no longer be loaded on my computer.....I've upgraded...the previous one is gone. My only hope is to get ahold of a previous cracked version so I can run my paid program through with the previous installed..... that risks my computer getting malicious files on it...which is why I did the clean install in the first place......
View 1 Replies View RelatedI have adobe pselements8. When I open the program I get a box that says 'gathering customer data'. This gathering does not close and I cannot open the program.
View 3 Replies View RelatedUsing CS5. I am unable to open two files supplied by our client. These two files pre-date CS6, and were made by a branch of our client in Germany. We are in North America. There are many layers of bureaucracy between us and the actual creators in Germany, so communication is impossible.
Â
An attempt at opening the files results in the error, "Could not complete your request because the specified color book cannot be found".However, in this case it is NOT POSSIBLE to "work with the file creator", and it is NOT POSSIBLE to use a different version of PS with the correct books.
Â
I have Color Manager, and I have cluttered up my CS5 installation with every likely-looking color book from Manager in the hopes that one of them would be the right one, but to no avail.So. What do I do? Surely by now Adobe has created some sort of utilty that allows PS to simply tell you WHICH color book is missing so you will know which one to go and get? No?
Every time I make a custom line (I used a dotted line a lot), once I close down Xara, the brush is no longer in my library and I have to create it all over again from scratch. Why is it not saving automatically to my library so that I don't have to keep creating the same custom line over and over again?
View 9 Replies View RelatedI have an assembly, which a customer wants to use in their 3D setup. Which file type, gives away the least information?
View 1 Replies View RelatedHow to upload a custom printer profile into Lightroom 3?
View 2 Replies View RelatedI've created a template that I use for customer proofs. It has the boilerplate text and three text boxes that I click in and type the "Customer's Name", "Description", and the "Date".
Is there any way of having a text box auto fill with "Today's Date" and the "File Name" with full path in a new text box that I'ld like to add?
I am currently writing a COM application that uses the Inventor 2013 APIs to open up and inspect CAD files. This utility is intented to operate on large amounts of Inventor data. I am using SilentOperation and Visibile properties to allow the automated process to run unmanned (i.e., suppressing any popups). However, there are occasions where Inventor will crash due to some corrupt data or some other system problem, which results in the CER dialog popping up.
The utility handles Inventor crashes by clearing out and restarting the session, but the CER dialog prevents this from happening until a user manually closes the window. I would like to avoid the complications of creating a monitor' that handles killing the Inventor.exe process in the event of a crash. Is there any setting - either in the application configuration or through the APIs - that would turn off the CER when Inventor crashes? I have seen solutions that disable CER for AutoCAD [URL], but I need to be able to do this in Inventor.
How can I disabling temporarily Autodesk Customer Error Reporting for AutoCAD?
View 1 Replies View RelatedWe have a certain customer that sends us Corel Draw files with bar codes in them and sometimes the bar codes appear as fonts when I open the files, but sometimes other files come across as bar codes. What causes the bar codes to come across as fonts on some files? Is it something the customer is doing that makes the bar codes come across as fonts?
View 9 Replies View RelatedAll of the sudden I can't create a customer profile when creating a new document. Earlier I selecting the print profile. I tried opening a new document and creating a custom profile but that option is grayed out.Â
Â
I created custom brushes yesterday but they don't appear today. Is that because of the profile that the brushes were created with and without that profile I won't see the brushes?Â
I would like to be able to send my customer with a link to web gallery with my first picks of the photo shooting for their selection.
Â
Customer would be able to select, from the web gallery their favorites.
Â
The service /plugin should be able to then, send me some sort of information that would allow me to automate the creation of another Collection only with their picks in LighRoom 4.
I have a problem where I am unsure if my upgraded template is incompatible with Revit 2013 or is there something else at play.
Â
If I create a precast stair in default template I get "end with riser" turned on automaticaly. If I copy that stair to my template and create new stair, "end with riser" is turned off and I manually have to adjust stair afterwards.
Â
Problem is "end with riser" is now an instance parameter of stairs and I can't find where to change the default value.
Â
Why is the stair type that works in default template stuffed when copied to my template?
Converting a default part template to a custom template? Â
View 1 Replies View RelatedCan you import layers from a template to a drawing with a different template
View 3 Replies View RelatedOur customer supplied us with an Autocad template, complete with attributes, that I would lite to use as an Inventor template.
View 3 Replies View Relatedcan anyone recommend me some really good template websites.... that i can go and check out i know a few.. but i just wanted to know if there was alot more... that were pretty good out there.
View 1 Replies View RelatedI am doing a personal proyect, a DVD of my babyshower son, and i wanna put a link on the menu to watch the pics. My idea is to make a edge in every picture, the thing is that there are 200 pics and is like a pain to do the same thing for each one individually. Mi question is the following: Is there a way to do a template to change all the picture is one shot.
View 2 Replies View RelatedI am having a blog Youth Hotspot (
[URL]............
I actually want to design a web template for this blog using Photoshop.
I have created a web template that has a white backgrond, and will be forming a site that will have a white background.
What is the easiest way for me to put a border around my template in photoshop before I export it?.. ie i would like to have a thin black or grey border.
I am using a web template and I there is an image in the template. I would like to replace the image but when I select the layer of the image or the image itself, I don't see any properties for the image file name so I can't change that to point to my desired image. How would accomplish it?
View 2 Replies View RelatedIs there a way to have a template in photoshop cs3? So instead of designing multipages in one psd with each page being a layer folder, you could have one psd as a template for global elements and a psd for each web page - when you updated the template psd, then the global elements in all the other psd's would be updated. I know there is a way to link psd's when placed in Illustrator but I would like to do the same within Photoshop. If this is not possible, what techiques do you use to layout multiple webpages that use global elements and save slice sets for each page?
View 1 Replies View Relatedi have a psd file of a button template. In the first instance i would like to be able to make new buttons from this. I have tried editing the text, and although i can do this...the text does not fit on the button and is not of the same style as the other buttons generated from this psd..told you i was brand new.
Secondly, i would actually like to make my own template for 2 sets of buttons ( new websites coming soon) and without a clue and no up to date tutorials i have really hit a brick wall....i don't even know how to change the colour of an existing button let alone start from scratch...
I am about to start a dvd sleeve cover but I do not know where to start! Is there a tutorial on this or just a template with construction lines and that sort of thing to help me?
View 4 Replies View RelatedI want to print my own calendar and add an image to the top. I want to find some kind of template for a 13 x 19 sheet of paper that has the month on the bottom and space for an image at the top. And it should be in a file type that Photoshop can use.
View 10 Replies View Relatedout of this skate board Click here but when i use the magic wand tool to highlight all the white areas, it does not select all the white areas, i've tried to save it in other formats to see if that will make a difference but im not havin any luck.
how do you suggest i do this?
what i want to do is to highlight all the white areas and then make that into a mask layer so basically its a template for a skateboard deck design.
how I try to slice it, PS always create these blank "spacers" image on the right side and bottom of my site template.
Anyone know of a way so that PS won't create them after I save it? even though those spacer don't use up much space, it just clog the html code with all these <TD> and img scr=spacer.gif code.
I was trying to play around withT-Shirt designs for a summer camp, and I am unable to find a T-Shirt template or something with the shirt design already laid out for me...can anyone point me in the right direction. Im def a Newb @ this..
View 3 Replies View Related