Photoshop :: Customer Wants EPS File Format
Jul 14, 2004
I did a logo for a company in Photoshop CS (it was an ad agency that contracted me so no direct contact with client). Just some text and clip art, nothing fancy. I've sent off the layered file in .psd format. Now they want .eps format. I know you can save as .eps format in photoshop, but there's lots of different options.
Photoshop EPS
Photoshop DCS 1.0 [*eps]
Photoshop DCS 2.0 [*eps]
Other options are
Preview - TIFF (1 bit/pixel) or Tiff (8 bit/pixel)
Encoding - ASCII85, ASCII or Binary. Or JPEG low medium or high.
Include Halftone Screen - yes or no
Include TransferFunction - yes or no
PostScript Color Management - yes or no
Image Interpolation - yes or no
what I need to select here. Is this dependent upon the print shop specifications? Or is there a typical EPS setting I should choose and be done with it?
View 5 Replies
ADVERTISEMENT
Jul 14, 2004
I think I'm in over my head here. I did a logo for a company in Photoshop CS (it was an ad agency that contracted me so no direct contact with client). Just some text and clip art, nothing fancy. I've sent off the layered file in .psd format. Now they want .eps format. I know you can save as .eps format in photoshop, but there's lots of different options.
Photoshop EPS
Photoshop DCS 1.0 [*eps]
Photoshop DCS 2.0 [*eps]
Other options are
Preview - TIFF (1 bit/pixel) or Tiff (8 bit/pixel)
Encoding - ASCII85, ASCII or Binary. Or JPEG low medium or high.
Include Halftone Screen - yes or no
Include TransferFunction - yes or no
PostScript Color Management - yes or no
Image Interpolation - yes or no
No clue what I need to select here. Is this dependent upon the print shop specifications? Or is there a typical EPS setting I should choose and be done with it?
View 12 Replies
View Related
Aug 14, 2013
Using CS5. I am unable to open two files supplied by our client. These two files pre-date CS6, and were made by a branch of our client in Germany. We are in North America. There are many layers of bureaucracy between us and the actual creators in Germany, so communication is impossible.
An attempt at opening the files results in the error, "Could not complete your request because the specified color book cannot be found".However, in this case it is NOT POSSIBLE to "work with the file creator", and it is NOT POSSIBLE to use a different version of PS with the correct books.
I have Color Manager, and I have cluttered up my CS5 installation with every likely-looking color book from Manager in the hopes that one of them would be the right one, but to no avail.So. What do I do? Surely by now Adobe has created some sort of utilty that allows PS to simply tell you WHICH color book is missing so you will know which one to go and get? No?
View 11 Replies
View Related
Feb 29, 2012
I have an assembly, which a customer wants to use in their 3D setup. Which file type, gives away the least information?
View 1 Replies
View Related
Jan 30, 2012
I've created a template that I use for customer proofs. It has the boilerplate text and three text boxes that I click in and type the "Customer's Name", "Description", and the "Date".
Is there any way of having a text box auto fill with "Today's Date" and the "File Name" with full path in a new text box that I'ld like to add?
View 5 Replies
View Related
Sep 25, 2013
What is the best export/import format for sending 3D files. I need some neutral format files, possibly Solidworks but I am not sure. Also any export settings to make sure I get decent quality files.
Nothing like getting a surface model when you want solid model.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
View 9 Replies
View Related
Dec 24, 2006
When a customer asks for a logo, what do you do? What do you need to know to make it?
Do you give them a template such as:
Company Name:
Colors:
Etc:
Basically, what do you need to know to make somone a logo (or design in general) and how do you get that information? After you get the information how to you continue with the project?
View 6 Replies
View Related
May 25, 2013
Have some photos of a warehouse fire in Plymouth Indiana. Files were saved as .jpg Can't get them to open.
One message is "Pain't cannot read this file. This is not a valid bitmap file or it's format is not currently supported." Couldn’t display DSC-0023.jpg because a suitable graphics importer could not be found.
Carl Beason
Windows 7, Photoshop cs4
View 10 Replies
View Related
May 30, 2012
I am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. try out the new features of CS6 for video editing.
I am running a 27" iMac with 12gb RAM and 1gb of Video RAM.
View 8 Replies
View Related
Nov 19, 2012
Getting this error when trying to use downloaded ACTIONS. "Could not place the document ‘Photoshop_Actions_03_by_ReehBR.atn’ because no parser or file format can open the file."
View 2 Replies
View Related
Apr 21, 2013
When trying to open a raw file in PSE 5 I receive the following error message
“Could not complete your request because the file format module cannot parse the file”
I checked and my camera Nikon D3100 is listed as a supported camera.
View 1 Replies
View Related
Dec 5, 2012
I create short videos using the PS frame animation panel. I used to be able to FILE-export-render video- and choose MPEG-4 Video in the settings panel which would render my file into a small .mov file. Now in CS6 the new render video panel does not have that option. I tried the QT options in the export window and my file is hugh! The H.264 option gives me an .mp4. I put the .mp4 into my web page via Dreamweaver and my video does not play when uploaded into the sever. The video plays fine in Dreamweaver before I upload to the server. After I upload to the server I just get a Q and no video on my web page. If I render the same file in CS5 I am able to view it in my web page. ADOBE WHY DID YOU CHANGE YOUR EXPORT VIDEO RENDERING OPTIONS in CS6?
View 2 Replies
View Related
Aug 8, 2009
I recently needed to reinstall windows xp. I have saved everything I needed to reinstall all my software. My photoshop CS2 is the only problem I've had. Since it was an upgrade my installation pkge is looking for a previous version. I have the serial number, original reciept, confirmation number, case number and all other materials needed including a challeng code given to me 2 years ago when I upgraded. After 3 hours and being kicked from Customer Service to Tech support over and over with a hold time of 15 minutes in between each one I was finally fed up. Each person tried the same thing. Ctrl/Shift/Dbl Click which does not work. They agree my serial number is correct, they can see my purchase from the order number on my original reciept, but not one could give me a straight answer. They all kept asking the same questions over and over but none made sense. Honestly I don't think there was a language issue either. The last one actually said I should upgrade to CS4..... how could I upgrade that if I can't even upgrade to CS2 on my computer. I have totally lost respect for the Adobe system of support. I have 3 Adobe programs and I am waiting for the day I need support on those. If anyone has any suggestions for me I'd love to hear them. They would not give me any help other than to say I must have a previous version loaded before I can load an upgrade.....NO kidding! But even though I paid and they see I paid for an upgrade in the past....they cannot come to the conclusion that the previous version would no longer be loaded on my computer.....I've upgraded...the previous one is gone. My only hope is to get ahold of a previous cracked version so I can run my paid program through with the previous installed..... that risks my computer getting malicious files on it...which is why I did the clean install in the first place......
View 1 Replies
View Related
Apr 16, 2013
I have adobe pselements8. When I open the program I get a box that says 'gathering customer data'. This gathering does not close and I cannot open the program.
View 3 Replies
View Related
Mar 6, 2013
I am getting this popup error when trying to open a .gif file:
"Could not complete your request because the file-format module cannot parse the file."
This comes up every time I try to open a .gif file. Even if I make a .gif file (like the image included in this post), save it and then try to open it again, I get the same error. I tried reinstalling CS4, but the error is still there. I have also done the reset on start-up and nothing. Some have suggested that I open it in (Windows XP Pro) MS Paint and then save it again. Did it and this does NOT work for me, either.
View 3 Replies
View Related
Sep 26, 2013
I am trying to open a image to edit in Photoshop CC. I am getting the following message:- Could not place the document ‘arrow_right_alt1-512’ because file-format module cannot not parse the file. I make this upper cover but when i put any image in the backgroud layer it shows me that Error
Image no.1
Image no.2
Image no.3
Image no.4
View 4 Replies
View Related
Oct 25, 2007
to convert a rather large & complicated logo in .PSD format to a Vector file, I have PS CS2 & IR CS2. Is there any way I can do it using what I already have without using the pen tool?
View 6 Replies
View Related
Sep 14, 2012
When I export my 3D-project (a coffee mug) from Cinema 4D (R11) as a .3ds file to PS CS5 Extended I get the following message: "The Photoshop 3D file format could not parse this file".The odd thing is that when I export and import a simple sphere it works. I believe that there is some kind of limitation involved?
View 2 Replies
View Related
Aug 22, 2006
im trying to get som .png's to open in photoshop cs and it keeps giving me this error message.
"could not complete your request because the file-format cannot parse the file."
what does that mean?
View 2 Replies
View Related
Jan 12, 2012
Every time I make a custom line (I used a dotted line a lot), once I close down Xara, the brush is no longer in my library and I have to create it all over again from scratch. Why is it not saving automatically to my library so that I don't have to keep creating the same custom line over and over again?
View 9 Replies
View Related
Nov 14, 2013
I've got a catalog that work fine in LR4.4, but when I try to upgrade them to LR5 I get the error, "Lightroom couldn't update the format of its catalog file because the file appears to be damaged." The catalogs aren't damaged as they work perfectly in LR4.4. I urgently need to update them to a new mac with LR5.
View 1 Replies
View Related
Nov 7, 2013
Is it possible, in AutoLISP, to code something that will save the current file (whatever it may be, assume ..dwg or .dxf, into R2000 .dxf?
View 9 Replies
View Related
Sep 28, 2011
I am wondering if there is a way to put the old save method back into the new gimp 2.7.3. I would like to be able to export to a new file format and automatically be using that file instead of the original file that I have just opened. If there is a plugin like this that would be great.
View 2 Replies
View Related
Nov 2, 2012
How to upload a custom printer profile into Lightroom 3?
View 2 Replies
View Related
Aug 16, 2013
I have used an exceptionally good website called [URL]...... for a number of years with no problems. I have just downloaded from them a .mp3 file lasting 5 minutes but when I come to load it into my project , I get an error message saying "File format mismatch". The only difference that I see between this and all the previous files I have downloaded from them is that this one has a bitrate of 320kbps compared to the previous ones of 130-190kbps.
View 6 Replies
View Related
Sep 21, 2008
Our archive consists of hundreds if not thousands of images that were professionally scanned using Kodak CD software (don't ask). We upgraded to Creative Suites and now cannot get the images to open because it cannot recognize the file format. I've located the Photo CD File Format Plug-In v3.0.7 but that doesn't seem to work.
View 13 Replies
View Related
Mar 22, 2006
I got this picture file in a .dcs format.
It is showing up in my print job as a Black Spot Color. (Giving me 5 plates now.)
Is it safe to just save this file as a .tif or .psd so I only have 4 plates?
(It's been awhile since I used this file format... I thought there had to be plates for C, M, Y, K for .dcs file format. I've forgotten and wanted to see if any of y'all know the answer.)
View 2 Replies
View Related
Jul 29, 2009
I have a large number of .png images I am working with. On many occassions I haveopened these, edited a little and resaved as .png24 and have done so numeroustimes with the images saving fine and showing transparency.However, many are now opening as locked and opening in indexed color mode, also with no transparency.I can resolve the locked layer issue by converting to RGB color mode or making a selectionand copying to a new layer but the main issue is the white solid image where it was once transparent.Perhaps the locked layer issue is somehow flattening the image and therefore removing transparency?I haven't a clue what is going wrong with this. I have many png images and it would take far too long tounlock and redo the transparency levels. I had been editing many of these fine and all of a sudden theynow open locked and no transparency.
View 2 Replies
View Related
Nov 4, 2013
Is there any way to set a preference for the file-format? Each time i save a file i have to adress it's format manualy, so it would be handy if there was a way to set a preference (via the short-cut menu maybe?!) for this.
View 1 Replies
View Related
Nov 2, 2013
I have cs6 and I can't open any actions that have an ATN file format.
View 3 Replies
View Related
Jan 24, 2013
Our company recently upgraded to new computer and software. After installing CS6 Photoshop I was trying to edit a rgb format file, but there was no option for SGI rgb. For earlier versions of Photoshop we were told to download 3 party plug-in to get this format to work. Our IT person said that the 3 party plug-in can no longer be used with CS6. I have a majority of my files as rgb and would like to edit these files, how can I do this? Is there a option during CS6 install for getting this format?
View 2 Replies
View Related
