I think that we can control tones under all the opaque areas of a layer with the contour editor for shaping layer effect ... and after that with the choke and size sliders, we can control the extend of its appearance. But, I think that, in fact, I could not soundly understand how it is functioning.
View 2 RepliesIn some earlier Photoshop version, you could edit the contours (looking like curves) that shaped layer effects like Drop Shadow or Bevels. To do this, you opened the contours drop-down library within a style dialogue like Drop Shadow; then you double-clicked onto a contour icon and you got the "Contour Editor", a dialogue looking like a small Curves dialogue.
But in CS6 i find no way to edit the contours provided. I can create new ones, which doubles the last contour activated, and i can add more contours provided by Adobe. But double-clicking on a contour icon only applies this contour and there is no way, it seems, to get to an "Contour Editor".
I'm on Windows 7/64 bit with ample RAM, with PS CS6 Extended.
Within the layer style window under the >bevel and emboss >Contour the option displaying images or list of contours is only opening to contour editor.
It's not displaying the contours within my collection I must've tripped off setting for displaying them but I can't find where that setting is, or if it's even available anymore? I don't believe I've used it since CS 3 or4. I'm using CS6 now but contours seems to have changed.
We have this contour setting for almost all the blending options like dorp shadow , inner or outer glow etc ...I opened the contour editor where I can make my own contours by deforming the curve.I can see the horizontal axis repersents the input value while vertical denotes output value.
I was wondering what these input and output actually are.If I could know what physically they represent then I can predict the result of different contours or cutom contours beforehand.
So can somebody please tell me what they actually are in general so that I could predict the result of different contour settings?
When I add contour data to my surface, I uncheck all the boxes in "Minimize flat areas by:" except "Swapping edges", and I check the "Swapping edges" box. The next time I add contours, I have to uncheck the same boxes, and check the "Swapping edges" box. I can set the default Mid-ordinate distance, etc. but I can't find anywhere in the settings that I can preset the check boxes for minimizing flat areas.
View 8 Replies View RelatedI've a problem with Gimp that comes from the fact that, when resizing a layer it becomes opaque, as if it were the foreground.
And the problem is that i wish to resize it to square it with another layer (that i don't see when resizing).
I'm creating a large poster. it consists of about 20 layers. Not doing anything fancy, just adding a new photo to each layer or some text. I want the bottom layer (background) to be 30% opaque. I know how to choose the layer and move the slider. My poster looks great as a .pdn file. However when I do a Save As .TIF, .PNG it reverts back to a solid photo of a soccer field instead of being more translucent.
Does this have something to do with blending mode?
I made a document with two layers, one with lineart, and another below it with some background elements I tried to put a new layer over the two of them by clicking the Create New Layer button, and after placing an object in the layer, tried to set the layer to Multiply by clicking the sleection circle, then "Multiply" in the Transparency drop-down menu. Nothing happened.
I then tried to set the transparency of the objects themselves to Multiply by selecting them and changing their transparency. Nothing happened.
I am able to copy the lineart and background layer and paste them into a new document, and have subsequently created layers appear properly when I set them to Multiply, but I have been trying to figure out what I apparently "broke" so that the layers would not display correctly.
Do I need to re caligrate the monitor or make some kind of adjsutment?
View 1 Replies View RelatedI'll make the important parts bold.
View 3 Replies View Relatedwhen I go to use the Layer Control on the Layer Properties it only lists the layer I'm working on. I then have to use the Layer Manager to change layers. why it would stop listing all the layers?
View 3 Replies View RelatedI have two contour label styles (major and minor) both separate layers. When I bring in a label style (single) for those layers it puts those labels on layer 0. How do I stop this. I wish to have these labels placed onto the layers on which they are created.
View 2 Replies View RelatedI need to create a truncated contour map based on data from a .asc file. I have connected the .asc file but there is no option for adding with query so I have brought the whole file in.
I then created a contour layer and added to map (all good so far) but when attempting to query this layer for my area of interest nothing appeared on screen.
I then did some manipulation of the sdf to create polylines at the contour elevation and tried to MAPTRIM but I stopped Civil 3D after having "not responding" for 15 minutes
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I'm working in 2011. Just labeling some contours in a new drawing, using the 'Multiple' setting. I found I could only draw one tangent of Contour Label Line. If I continued, I could click but no labels were created and on finishing the command I could see that those clicks had been ignored. What gives?
I found that the labels were on the current layer, instead of the layer they're meant to use.I also realised that my current layer was locked (from the previous task).
if the current layer is locked, the contour labels ignore the layer setting that they are meant to use, and come in on the current layer instead. And you can only draw one tangent's worth of contour labels at a time before finishing the command and restarting.
Solution: make a different layer current or unlock your layer.
are contour labels generally created on the current layer and then moved to their proper layer?Is that why it hit a snag: it wasn't permitted to move the object to a different layer because the one it was on was locked?
I have a black/white linedrawing, TIFF, where I needed to replace som texts. I saved it as PSD, lassoed the texts, erased them and inserted the new texts in about 20 different places.
The text size is only about 6 pt., and the whole drawing isn´t more than about 14 by 14 centimeters. In the PSD file all the changes now appear in separate layers (with the background drawing at the bottom, see inserted .png) one for each erased bit of text, whereas I thought it would be convenient to have all in one layer.
How does this influence the filesize, and how do I combine all new texts in one layer, if that takes up less space? Layer 3-5 doesn´t seem to serve any purpose, how does one see what´s actually in a layer? I also need to save the file as EPS, and doing so the filesize goes from 3,4Mb in PSD to 45Mb in EPS. What are the possibilities of minimizing this EPS-file?
What is the difference between rooms and areas? Why create an area schedule off 'areas' as opposed to using 'room' areas? Can you create a schedule off room areas?
View 2 Replies View RelatedI found out that there is a way to show clipping areas in Photoshop when adjusting levels via an adjustment layer. While moving the slider, you hold down the ALT key.
I tried this in PSP X3 and it does not work. Any feature for seeing the clipping preview is available in Paint Shop Pro? It's a nice feature.
After doing everything i can find to optimize my hardware/software for doing 3D animation in Ps Ext CS6. I still cannot render an animation to video using the Ray Traced Final setting. (Ray Traced Draft, no problem.) The last time I tried (after repairing disk permissions), at least Ps did not crash and give me the same old crash report (Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x00000007a0020000). This time I just got an error msg that my request could not be completed. (Progress?) Checking Activity Monitor, I could see that my available RAM, which was 13 GB when I started the render was now less than 1 GB (761 MB).
So, I have come to the conclusion that my 16 GB of RAM and 300 GB available for virtual memory on my HD is not enough for rendering the type of 3D animation I am trying to do. Would you agree? Also, I have read it is not good to use the same HD your program is installed on for a scratch disk, so I am considering getting an external solid state drive to use as a scratch disk.
In the image below I have an aerial photo of an Island. I need to make it so as water areas are black and land areas are white (not greyscale) almost like a silhouette. My first plan was to draw round the island with a black paint brush and then use the "bucket fill" with a suitable threshold to fill all of the areas up to the black outline with black, however this doesn't work as the bucket fill either breaks through the black line or when I reduce the threshold, doesn't color the water areas solidly.
View 3 Replies View RelatedI have a drawing (autocad 2011) ,which i have to measure the areas of the many rooms and i arrange these areas in a table! is there any fast way to do so? avoiding the boaring typical area measurements room by room?
View 9 Replies View RelatedI often run actions that have modal control for certain steps turned on, in particular, when I want to give a layer a custom name. Prior to CS6, I'd run my action, the window would open allowing me to rename my layer, and then it finishes my action. However, in CS6, it seems to ignore the modal control button selected, puts in whatever the default info is and continues on.
View 2 Replies View RelatedHow can I control the stack order of a shape layer with the path arrangement option on the shape tool options menu? It seems to me that this control does not do anything with shape layers ... does not control anything. How can I use this option?
View 1 Replies View RelatedColours are being over saturated in shaded areas and less saturated in light areas when filled over an aeea. The colours need to remain the same saturation level when darkened or lightened. Is a setting affecting the saturation levels?
View 12 Replies View RelatedI'm working on Civil 3d 2012 and when it's set on Autocrad classic profile I can select my layers right in the drop down list by typing the first letter of the layer and it goes to it. But when my profile is set on Civil 3d, I can do the same in the layer drop down. Is there a way to set it like autocad classic?
View 1 Replies View Relatedwe have a drawing where we were un-able to use snaps (end, per, quad, etc.) on any blocks.
It seems like this particular drawing has issues not seen elsewhere.(besides the fact it was badly drawn) After some time playing with all the settings. We turned on the zero layer and then all the nodes were available as usual.
i've been using AutoCad for 20 years and never seen this. Is this some kind of new feature?Can you control the snaps with a layer? WHY?
Windows 7 64 bit
Inventor 2012 Professional
Dell T1600 CPU E31245 @ 3.30GHz
8 GB RAM
The layer control dropdown in the layer toolbar is just showing the state of the selected object or layer 0 if nothing is selected. Same for the ribbon combo. But it's working in the Quick properties dialog.
View 5 Replies View RelatedOut of the blue, my Layer Control will not work. When I click on the icon, the top two lines on the screen go gray and the whole thing locks up. The layer palette does not appear. If I try to choose anything on the screen, it beeps. It unlocks if I hit escape. If I type in "layer" at the command line, the same thing happens. At this point, I am unable to change lineweights & colors within my layers settings.
View 2 Replies View RelatedWhen I click in my layer control and type in a "letter" to quickly scroll to that part of the alphabet, it changes my current layer to the first laser alphabetically with that certain letter. Is there a way to turn this off? If i am just looking at layers, I don't want autocad to change my current layer.
View 9 Replies View RelatedMy layer Control dropdown isn't working. It's showing only the current layer. If I select an object on another layer, it'll display that layer and the current layer only in the dropdown.I've tried using the PICKFIRST setting, but this makes no difference.
View 1 Replies View RelatedWhen dragging over a Modelspace View onto a newly created sheet in the SSM, is there a way to automatically designate it to a particular layer of choice, such as the G-Anno-Nplt layer? Just looking for a way to take an extra step out of this process.
View 1 Replies View RelatedHow to control existing layers (Freeze On/Off), in an existing viewports (5 of them in Paperspace) in AutoCad Existing drawing with VB.net? I just want to trigger On or Off, different layers in each different viewports.
View 2 Replies View Related