AutoCAD Civil 3D :: Defaults For Add Contour Data And Colon / Minimize Flat Areas By?
Feb 5, 2013
When I add contour data to my surface, I uncheck all the boxes in "Minimize flat areas by:" except "Swapping edges", and I check the "Swapping edges" box. The next time I add contours, I have to uncheck the same boxes, and check the "Swapping edges" box. I can set the default Mid-ordinate distance, etc. but I can't find anywhere in the settings that I can preset the check boxes for minimizing flat areas.
View 8 Replies
ADVERTISEMENT
Feb 11, 2013
I'm working on a topo survey and the contours are crossing each others (See attached pic) and what I did was edit the surface by adding points. I know that these points are fake, but how does this affect the terrain surface for design point of view? I did try swapping edge and deleting lines but makes it worse. Also as you can see in the pic, I don't see the added points like it did back C3D 2008.
View 5 Replies
View Related
Nov 13, 2012
I am working on three different projects at once. For each project, I was sent a drawing with contours as polylines. Each contour is broken up into polylines about fifty feet long each at elevation 0. I am trying to set the polylines to proper elevation without editing each one individually. Each drawing contains several hundred polylines to modify. I was hoping for some sort of way to use a fence and interval (2') with a starting elevation.
I've searched the internet but haven't found a lisp routine to do this. I thought I remember Land Desktop having something like this, but can't seem to find it in Civil 3D 2012. I have found several threads asking the same question. Each time the poster was referred to a blog 7629. That blog unfortunately seems to have been taken down. If I can’t find an answer soon, it looks that my best option would be to retrace each contour which makes me glad to be paid hourly.
View 9 Replies
View Related
Dec 19, 2011
A rather simple sheetmetal part won't result in a flat pattern. Pls. see attached screendumps.
The problem starts with the contour roll. Surpressing this contour roll feature (and dependent featured flange) results in a OK flat pattern.
IV Pro 2012, Win 7-64 Ult.
View 1 Replies
View Related
Jan 21, 2013
Inventor 2013-I'm working on a sheet metal cover using contour roll and I find when I dimension the flat pattern that radii that should be the same are not. Can my approach is fundamentally flawed? I tried making this part out of one 220 degree contour roll and I found when dimensioning that the center points of the arcs are not symmetric as expected. I then used two contour rolls to create the part basing the second contour roll on the first contour roll sketches and I still have the same issues.
View 4 Replies
View Related
Jul 16, 2013
I am trying to design a welded Iron tank whose caps are made of sections, then welded together. I made one section using Contour Roll on Sheet Metal, and worked fine, but when I made the Flat Pattern it mades a square.
View 3 Replies
View Related
Sep 1, 2013
I think that we can control tones under all the opaque areas of a layer with the contour editor for shaping layer effect ... and after that with the choke and size sliders, we can control the extend of its appearance. But, I think that, in fact, I could not soundly understand how it is functioning.
View 2 Replies
View Related
Sep 8, 2011
I've got a routine that gets the surface, I can rename the surface, get the min and max elevations,... But when i want to add a ContourData there is a problem.
I set up a SurfaceAnalysisContourdata (see code below), when I try to add the maximum elevation to the array I get the error "Object reference not set to an instance of an object"
Dim cdata(0) As SurfaceAnalysisContourData
cdata.Initialize()
With cdata(0)
.MaximumElevation = TextBox1.Text 'Maximum surface
[Code]....
View 1 Replies
View Related
Nov 4, 2013
We do a lot of very large site plans with mulitple options and have to compare cost differences for Concrete, Asphalt, & Base Course. We hatch the areas and print in color so it is easy to see what is concrete, asphalt, grass, water, & Base course. Is there a way to create a table that would update the total areas that we have hatched? We make a lot of changes to these plans and it takes a long time to keep adding up the areas that are hatched everytime and typing the informaiton into a table. I have the table setup so once we type in the sq. ft. of area it calculates the totals but was hoping there was away so it would automatically update the ares in the table for us when we make changes.
View 4 Replies
View Related
Jun 22, 2012
When I use find and replace text in Autocad 2008lt the text that has been updated is now prefixed with a semicolon why ?
View 9 Replies
View Related
Mar 24, 2013
How to convert a 3D Polyline contour to Polyline contour.
View 4 Replies
View Related
May 25, 2012
C3D 2012..In some drawings I can set the Default Styles in the point creation box.Some drawings it's greyd out and won't let me change the default.
View 2 Replies
View Related
Mar 15, 2013
I am trying to change settings in my template so that some of the Edit operations are turned OFF by default in newly created surfaces. Right now all of these options are turned on for each new surface. The command settings for CreateSurface allows me to control the build options for new surfaces, but I cannot find anything for edits.
View 1 Replies
View Related
Nov 12, 2013
I'm tweaking out dwt file and I am noticing that the default lable and pipe style I have set in the network defaults is not being honored.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
View 5 Replies
View Related
Sep 9, 2013
When I create a report from 'Staion offsets to points' to excel, the Station, (what I would call chainage) is coming up as 3+10.00 in the spreadsheet. I need this to be 310.000 so I can apply formulas in excel. How do I change this.
I've changed the alignment label style to show it as this format, and it works fine. I've also gone into 'Edit report settings' and changed alignment station display to ####, decimals to 3 places, yet it keeps giving me the same format with 2 decimals.
Also, in this report, how do I remove the metre symbol 'm' (i.e 1400m) from the offset and elevation display?
I need to create an excel spreadsheet with quite a lot of data, apply formulas, and I really don't want to remove every 'm' and rewrite every chainage.
View 4 Replies
View Related
May 15, 2012
Every time I create a new layer, name it, asign a color, linetype, etc...it defaults back to the original color, making me set it twice. Am I missing a setting somewhere?
View 2 Replies
View Related
Nov 22, 2013
I have quite a few alignments to create and would rather not have to set the layer and conversion options for each. I'd like all to be on the same layer (that is already defined in the drawing) and to change the conversion options both off. I've been looking through the settings table in TS, but haven't found anywhere to change the default layer and conversion option states. Currently, the create alignment from objects defaults are to have alignments on independent layers (Model-Alignment*, where * adds the alignment name as a suffix to the layer name) and both conversion options are on.
View 6 Replies
View Related
Jun 19, 2013
I'm not finding where to change the default Description for Creating Cogo points by the Create Points-Alignments>At Alignment Geometry method
The last characters PC, PT RP etc. seem to be controlled by the Drawing Settings>Abbreviations but the Alignment name and stationing is what I'd like to eliminate from the description if possible.
Almost seems hard coded but hopefully I've been looking in the wrong places.
The descriptions are coming in like the caption whether I select Raw or Full description option.
In command settings for Point>Create Points>Points Creation>Prompt for descriptions>Automatic - Object is what I'm using.
What I'm hoping to accomplish is just PC, PT RP etc for description without the find / replace edits I'm currently doing in the exported ascii files.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 1 Replies
View Related
May 9, 2012
I can't find the setting for setting the default pipe network layers - dialog that opens when I create a network.
I have different utilities, obviously want them on the right layers.
E_WM --> exst. WM layers plan/profile
E_SAN--> exst. sanitary layers plan/profile.
etc.
I have a template drawing I am getting my styles from. where in the template are these things set?
View 4 Replies
View Related
Aug 15, 2011
I have a drawing (autocad 2011) ,which i have to measure the areas of the many rooms and i arrange these areas in a table! is there any fast way to do so? avoiding the boaring typical area measurements room by room?
View 9 Replies
View Related
Aug 14, 2013
The create points tool window doesn't use the Points Creation options I set for Default Elevation and Description, when go to create a bunch of points I have to key these in for each one. I know if I go and set these in the settings tab they will stick, but I would like for the tool window to work like it implies.
(running C3D 2012 sp4, Win7 64bit, 8GB)
View 3 Replies
View Related
Apr 24, 2012
I have a master shape file that contains parcel ID, owner, tax info., etc. I have another file ( access 2003 -open to better file format suggestions-) which contains parcel ID and a "yes" or " no" entry for whether or not the parcel needs a new water meter. All I want to do is add the water meter information into the other shape file. This would create one shape file with one table with all the information that I need.
Ultimately I will use the information to do a map query and find out spatially where i need new water meters.
Right now i have the master shape file connected though the “Connect to Data” feature. I also have the new data added to the drawing though the Data sources------>attach under the “Map Explorer” Task pane. I attached access file (ver. 2003 .mdb) which has two columns “Parcel ID” and “Meter”.
I right click on the shape file under the display manager and select”Create a Join;” however my water meter table is not listed as an option. Will this not work?
Plan B - I tried to Create and connect to the access file as an ODBC connection. Followed this guy’s directions to a T [URL]. But when i populate my table under the fdo connection the column headings exist ( “parcel ID” and “Meter”) but the actual data is missing. Am I missing something important?
Note: I am running c3d 2012 on a Win 7 64 Bit machine. I also removed office 32 bit apps and installed 64 bit apps to see if that would solve the problem. No go.
View 3 Replies
View Related
Apr 10, 2013
say you make some parcels in your project with custom data fields like: id_no, permit_no, acres_served etc. you attach an agency provided shape file via an fdo connection that has many fields of information like above.
when you right click on your parcel and do parcel properties you get a tab that lets you input the custom parcel data.
lets say you print an fdo map label showing, say, the id_no, provided in the shape file. Then in your custom parcel properties for id_no you type that in.
is there a way to make an expression to put in the other custom parcel properties that will read, say, the permit_no(id_no) from the fdo like and put that information in the custom parcel property field?
View 4 Replies
View Related
Jun 7, 2012
I'm having problems getting super elevation data to transfer to different drawings by means of an alignment data shortcut. I know alignments hold the super elevation data so I've gone into my alignments data shortcut, input my super elevation data, saved and closed. Now when I open my finished grade drawing, reference in my alignment and profiles, then create a corridor from that information, my super elevation didn't transfer with the reference.
I pulled cross sections and it appears is has no clue there is any super elevation data. Also, I tried bringing it directly into the drawing I'm doing my corridors in and it erred saying I must be in the parent alignment drawing. Data shortcuts are pretty much useless to me if super elevation data doesn't transfer.
64 bit Windows 7
Intel Xeon (R) @2.8GHz
6.00GB Ram
Civil 3D 2012
Civil 3D 2012
Intel(R) Xeon W3530 @ 2.80GHz
6.00GB Ram
Windows 7 Professional
View 2 Replies
View Related
Sep 9, 2011
i have created a data band in profile view that should show a created profiles elevation, but some of the the data fields are missing irregulary. Also in the data band that shoud show the diferenece betven the tow profiles - EG and the new profile the data is missing. The EG profiles data and the surface are ok all is shown.
View 4 Replies
View Related
May 3, 2013
I've just installed Civil3D, 64-bit on windows 7(running on bootcamp) and am trying to insert a georeferenced raster image but have encountered some issues.
1. "Home tab>>Data panel>>>insert An Image" - The data panel is missing and it's also not found in "customize palettes"
2. Trying the data connect route does not work either: Display manager>>>Data>>>Connect To Data - There is no 'Data' option and I cannot connect to Data.
View 1 Replies
View Related
May 1, 2013
Trying to calculate a catchment area to allow me to size some culverts using Civil 3D 2012 Sp#1.
" The specified location results in a Catchment with no area."
After sitting for 15 miutes I keep getting the above message. The surface is huge and there is an obvious catchment area (or I think it is obvious). The surface was generated from contours and cover an area of approx. 8Km x6.5Km but the catchment ares should be around 15-20% of that area.
I tried another one upstream about a Km and it worked fine. So the one I am doing now should encompass the upstream area as well as from that point downstream to the Discharge Point.
View 3 Replies
View Related
Jul 13, 2013
I'm working on a windfarm access road (5m wide with widening at bends to 8m) and I need to identify the areas of widening.
I've got the centreline alignment and created the 2.5m offsets to each side. I have also created widening on the insides of the bends using the widening tools and used a linear taper at entry and exit. I now need to hatch up the portions where the road has been widened to demonstrate compliance with the specification and the only easy way I can see is to export to autocad and use the hatch tools (not tried to hatch between alignments).
Whilst this works it isn't dynamic so if the alignment is adjusted the widening alignments are also moved but the hatching remains.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 9 Replies
View Related
Aug 1, 2013
I have a bunch of polylines I want to display the areas for. I am using mtext and fields. However the fields format part always defaults to a less than desirable format. Is there a way to set the formatting how I want it for the entire file? Or is there a better way of labeling than fields?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 9 Replies
View Related
Sep 20, 2011
When generating a line of contour labels with Contour-Multiple, most of the labels are orientated properly but some of them on the line are rotated 180 degrees. Why aren't they ALL orientated in the same direction?
Also, sometimes, all of them will be orientated in the wrong direction such that they are, essentially, upside down. Is this a bug or is there a setting to adjust?
View 4 Replies
View Related
Jul 10, 2012
I have recreated two surfaces for my design, existing and proposed. I had used polylines for contours for in each surface. I tried labeling the contours but it will not let me select the contour itself.
I then tried to make the contours to 3d polylines and again added them to the surface and rebuilt. I still am not allowed to label the contour since it doesn't let me select the polyline. I am able to select the surface however.
View 1 Replies
View Related
