AutoCAD 2013 :: Calculating Multiple Areas And Putting Data In A Table?
Nov 4, 2013
We do a lot of very large site plans with mulitple options and have to compare cost differences for Concrete, Asphalt, & Base Course. We hatch the areas and print in color so it is easy to see what is concrete, asphalt, grass, water, & Base course. Is there a way to create a table that would update the total areas that we have hatched? We make a lot of changes to these plans and it takes a long time to keep adding up the areas that are hatched everytime and typing the informaiton into a table. I have the table setup so once we type in the sq. ft. of area it calculates the totals but was hoping there was away so it would automatically update the ares in the table for us when we make changes.
View 4 Replies
ADVERTISEMENT
Oct 24, 2013
Is it possible to embedd data in a table so that a user can select from a group of data within one cell?
I use this technique quite often in Excel. One cell in a table can have various values: A, B, C, or D. While another cell can have a different set of values to choose from: BLUE, RED, ORANGE, or PURPLE. The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.
View 2 Replies
View Related
Aug 15, 2011
I have a drawing (autocad 2011) ,which i have to measure the areas of the many rooms and i arrange these areas in a table! is there any fast way to do so? avoiding the boaring typical area measurements room by room?
View 9 Replies
View Related
Jan 21, 2013
I received a cross section file that was created in Micro Station and need to calculate the cut and fill of the project. There is no way to get the 3D files the cross sections were created from. Everything in the file is exploded and flat.
I was going to hatch under and above the existing grade to find the cut and fill and then thought about the scale of the cross sections. In model space the cross sections are 1=1 H and 1=10 V. When I do a hatch and get the area it is giving it to me way high. If I just divide by 10 I don't think that is right either since the hatch areas are very irregular.
Scale the cross section vertical down by 10 and don't change it horizontally. I don't know if this is possible.
Somehow set the horizontal and vertical scale and hatch above and under to get the areas. I don't know if this is possible either.
View 1 Replies
View Related
Jul 23, 2013
I am using data extraction and data linking to an excel file to count blocks and list details. I need to be able to update automatically and the most trouble I have been having is that I need the images of the blocks to come out in the table as well. so far only have been able to get the text data to come out in the table.
View 3 Replies
View Related
Dec 10, 2012
Is there any way to do this in Autocad? Split a table so it is in 2 sections side by side, rather than one verrrrrry long one? Similar to what you can do in Inventor?
[URL]
View 1 Replies
View Related
Mar 12, 2013
I want to edit some values in the data table of a shape file (*.shp) with AutoCAD Map 3d 2013. Every time I alter a value in data table it takes about 30 seconds until AutoCAD Map saves (?) the value. I have to wait 30 second until I can continue working. Why is this so slow?
The shape file has 7000 lines and is stored on a local drive.
View 5 Replies
View Related
Jan 16, 2013
I am editing an old file set up by another firm that is used by our clients to keep track of room sizes etc, which has a room data table and room tags tied to area polylines. It has worked just fine on our 2013 Acad Architecture, but when I sent them (saved down to 2010) back to our client, using 2012 Acad Architecture, the tags disappear and the table is unpopulated.It seems like it must have something to do with the file originally being created way back when, along with some quirk between 2012 and 2013.
View 2 Replies
View Related
Jan 20, 2012
Is it possible to add data to a feature data table? Example: The shape file data downloaded from NRCS only has the Soil number for the State. As I check out features I would like to add data for the soil name, soil group, etc. as additional columns in the data table and have it available in the future by checking the feature back in to my local information.
View 2 Replies
View Related
Apr 19, 2012
Is there a way to have a table that calculates cumulative hatch areas of certain layers? And if I change the layer of a hatch, the table then automatically updates?
View 2 Replies
View Related
Jul 26, 2013
A fundamental question that comes across regularly is calculating values for offset distances, move, radii, etc. If I want to calculate a value of .5 the interface does not accept 1/2 as a valid entry.
View 7 Replies
View Related
Mar 19, 2013
Generic lisp file that summaries areas of hatches in a table,
I’m wondering if there is a lisp file that can read the boundary of the study area and the hatches and stick there areas in a table as shown in the attached screenshot
The areas of the roads are derived by subtraction the total area of hatches from the area of the study area.
The dwg file is attached
This is very frequent sort of work and takes a lot of time to be constructed. I’m already using fields to perform this kind of work.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 8 Replies
View Related
Nov 11, 2012
How to calculate the three-dimensional surface area of a revolved arch (such as attached file) by autocad 2007? such as an irregular dome.
Which software can do the job? Autocad or Matlab software or .....
View 9 Replies
View Related
Feb 5, 2013
When I add contour data to my surface, I uncheck all the boxes in "Minimize flat areas by:" except "Swapping edges", and I check the "Swapping edges" box. The next time I add contours, I have to uncheck the same boxes, and check the "Swapping edges" box. I can set the default Mid-ordinate distance, etc. but I can't find anywhere in the settings that I can preset the check boxes for minimizing flat areas.
View 8 Replies
View Related
May 6, 2007
I need to put a signature on about a hundred photos.. just a small initial on one corner of the photo.
Should I do this one at a time or can I process multiple files in a single action?
I am currently using Photoshop 7.0
View 5 Replies
View Related
Mar 6, 2003
I have a drawing which contains about 100 "areas". These areas are closed polylines. I would like to get a total area of all these polylines.
I have tried using AutoCAD 2002's AREA command, but I am only able to select one item at a time, (AREA, Add, Object). This is fine for calculating a few areas. It gives me a running total of each item that I select.
Using the LIST command works OK for a few items, but you still have to wade through all the other information to get the area info for each item.
Is there a way to select crossing ALL the areas that I have, and have it return a total?
View 4 Replies
View Related
Oct 6, 2011
Is that possible to read the Autocad Table data , without opening the Autocad from VB.NET. I tried with opening one autocad then loading the source dll. it was working perfectly.
But i need to without opening a application its possible or not?
View 6 Replies
View Related
Jan 27, 2013
How can I Get table name of the object data of a selected layer, with C#.
View 4 Replies
View Related
Apr 7, 2013
I am working on a co-ordinate utility that utilises data extractions. I am able to extract the data that I want to an XML file, but how do I create a dxe file and link it to a table? I have found the WizardSettings has a table style, but that is as far as I have reached.My code is below.
using Autodesk.AutoCAD.ApplicationServices;using Autodesk.AutoCAD.DatabaseServices;using Autodesk.AutoCAD.DataExtraction;using System.Collections.Generic;using System.Data;using System.IO;using AcApp = Autodesk.AutoCAD.ApplicationServices.Application;namespace acmCoordinates { public class DataExtraction { const string outputXmlFile = @"c:empdata-extract.xml"; public static void.
[code]....
View 2 Replies
View Related
May 31, 2011
Most people that I work with don't use autocad map, they use the regular Autocad. So they can not access the table data of my vectors. Is it possible to transform the table data that I choose and place it as text in the appropriate place ?
View 2 Replies
View Related
Jun 8, 2012
Here is what i would like autocad to do
I work in architecture, and every time i create an opening (door, window) i add a block next to it with an attribute to the reference number
I was wondering if it would be possible when creating that little block to give it more information and later on extract the information from it to a table
Ex: door 106-02, steel finish, 3'x7' , isolated, steel frame, 2" thick etc.
View 0 Replies
View Related
Dec 21, 2011
I have a table in excel and I'd like to have text in cells link to nodes on a map.
i.e. I have the traffic volume of a road section in a table. I'd like to show that volume on a map beside a circle where the count was taken. I'd like to be able to update the table value and have it also update on ythe map.
View 8 Replies
View Related
Sep 28, 2003
If it is possible to plot points (or a PLine, or a mesh) in AutoCAD from a table of values in EXCEL (columns of x,y,z coordinates).
View 8 Replies
View Related
Feb 27, 2013
I am having problems regarding Data Table Types.
I utilize Excel to build BOM's. I import them through data connection, I than will tell it which cells are Headers / Data / Titles. At which point text sizes / styles ... are applied.
Problem,
I have a cell that is enlarged with small text in the middle. I can orientate the boxes to increase in the Vertical or Horizontal directions larger than the original Excel Data File but i cannot get them to shrink?
I want .05" on the left / right of the widest data, and .02" on the top and bottom. If i change Vertical to .02 it puts the text at the top of the cell.. but if i put it at 1, it enlarges the cell and places it in the middle.
Horizontal i want .02 from the left, but if i align left it goes all the way to the left line.
Can a table format re-define an external excel spreadsheets cell lengths? Obviously taking into account if Wrap text is Enabled it takes the width and defines only the height?
View 1 Replies
View Related
Jun 13, 2013
Putting a Lightroom catalog in the Creative Cloud folder to use for multiple computers? It seems like it should work well for photographers who are on the road a lot and would like to avoid merging catalogs after each trip.
View 1 Replies
View Related
Sep 7, 2012
How can I display the object data in a grid with vb.net and also add new features to the same layer along with the object data.
View 3 Replies
View Related
Apr 19, 2013
I want to export my slope - table - legend to an excel or txt file.
(Of course only the values)
Civil 3D (2013)
View 2 Replies
View Related
Nov 23, 2011
I am trying to insert a table using a data link. I set up the Link through the DataLink manager and then insert the table using a range. I click OK to insert the table and after a few seconds of thinking ACAD sits there with no table on the screen. When I look in XREFs, the DL is there but says it is unrefrenced. Tried multiple ways of entering or setting up information to no avail.
View 6 Replies
View Related
Mar 15, 2012
How to insert a linked excel table into my drawing, however I have not figured out how to add rows to the table, the option is greyed out. I can insert rows above and below the (inserted) table but not anywhere in the middle.
I've tried everything I can think of, even removing all the formatting in the .xls spreadsheet to no avail. The cells are unlocked, I can manipulate the data, but not being able to insert rows is really hindering the efficiency of using a data linked table.
View 9 Replies
View Related
Sep 23, 2010
i get an error message telling (invalid thread data table. Please check Thread.xls file.i tried to reinstall the windows and the autodesk inventor but the error keep appearing.
1.my os is windows xp sv2 32 bit
2. inventor version is 2011 32 bit i also had the same problem with 2010
3. i tried to reinstall without any antivirus on my pc but i still have the same problem
4. what's a UAC?
5. yes i've office 2007 installed & i had tried with office 2003 but also the same problem.
1 the first time i used, i made the bolted connection once, but at the second time i kept having this issue.
2 my last trial was installing a freh copy of the windows then install office and the inventor only but nothing changed
3 i tried to install the inventor on another pc but i also had the same issue
4 i searched the c drive for the file THREAD.xls, and i found three of it and i guess they are fine.
View 5 Replies
View Related
Nov 5, 2013
I found out you can export the data table of feature properties from an SDF connection by choosing Options > Select All and then Options > Export and obtained a .csv file I was able to bring in Excel...but there are no headings for the data. How to export the column headings as well?
View 2 Replies
View Related
