I've a problem with Gimp that comes from the fact that, when resizing a layer it becomes opaque, as if it were the foreground.
And the problem is that i wish to resize it to square it with another layer (that i don't see when resizing).
I'm creating a large poster. it consists of about 20 layers. Not doing anything fancy, just adding a new photo to each layer or some text. I want the bottom layer (background) to be 30% opaque. I know how to choose the layer and move the slider. My poster looks great as a .pdn file. However when I do a Save As .TIF, .PNG it reverts back to a solid photo of a soccer field instead of being more translucent.
Does this have something to do with blending mode?
I made a document with two layers, one with lineart, and another below it with some background elements I tried to put a new layer over the two of them by clicking the Create New Layer button, and after placing an object in the layer, tried to set the layer to Multiply by clicking the sleection circle, then "Multiply" in the Transparency drop-down menu. Nothing happened.
I then tried to set the transparency of the objects themselves to Multiply by selecting them and changing their transparency. Nothing happened.
I am able to copy the lineart and background layer and paste them into a new document, and have subsequently created layers appear properly when I set them to Multiply, but I have been trying to figure out what I apparently "broke" so that the layers would not display correctly.
I have some grapes where i have to draw circles upon. In these circles i have to enter some text. Note - here is an example, where you can see how the whole task is meant!?
See the example - and see the results...
How to add the circles with the opaque design - (note they look like they are drawn with pastell colors - aren't they )
greetingsAttached File(s) grapes_to_add_circles.jpg (36.57K)
Number of downloads: 3 grapes_example.jpg (26.29K)
Number of downloads: 4
I have an image with just one color, black. But it has a shadow which is partially opaque. I want to select the shadow, so I can delete it. But when I use "select by color" it selects the whole image including the shadow. How do I just select the shadow? Or conversely, how do I just select the image?
View 3 Replies View RelatedI think that we can control tones under all the opaque areas of a layer with the contour editor for shaping layer effect ... and after that with the choke and size sliders, we can control the extend of its appearance. But, I think that, in fact, I could not soundly understand how it is functioning.
View 2 Replies View Relatedas you can see I was able to make the background transparent by 'select by color' + 'add alpha channel' + 'remove selected area' but I also need to remove the white behind the 50% opaque reddish orange flames as well, i cannot select the white by 'select by color' or 'magic wand select' or any of the selection tools because of the issues of the white / reddish orange mix of opacity, so I need removing this white behind the part opacity color.
View 6 Replies View RelatedI am upgrading from cs2 to cs4 and I noticed the Layer window is 65px wider in cs4. I norrowed the change to the "Blending Modes' dropdown box. See screen shot. http://www.inspiredvisuals.com/test/tabwidth.jpg
Is there anyway to to resize the window further or change the blending modes drop down box to a smaller width like it was in cs2?
I know this sounds picky but every pixel available to workspace is important. I might be willing to pay if someone can help me out with this.
I have a few images to merge together and having trouble.
I have a nice background and an image of a person with no background.
I create a new layer on top of my background and then import my image of the person. I can move it arround the layer but how do I make it smaller?
I'm fairly new to Photoshop. I'm trying to resize a image which I've pasted into a layer, I know how to Transform and rescale the image but I'd like to enter the width of the image in Pixels somewhere.
I'm designing an advert for a billboard, I've created an A4 landscape canvas and I'd like to put 5 images at the bottom of the canvas but I'd like to set them all to the same size which fits across the whole width of the canvas.
When I Select All/Copy a photo to Paste as New Layer on top of another photo, it always pastes as a humongous image. I have to scroll & scroll & scroll down to find grab handles, then fiddle & fiddle resizing the image to the same size as the underlying photo. I take the photos with the same camera. Seems to me the photos ought to be the same size!
View 3 Replies View RelatedI have two images that I didn't create, but need to be re-sized. A wide gradient bar with rounded-corners and a box with rounded corners (attached). I suspect I may need to recreate these in GIMP (unless there's another way).
View 3 Replies View RelatedI need to resize images for the web. They need to be 100 pix x 80 pix when I use the scale image tool I can only change one value otherwise it distorts the image I have tried cropping it as well but with no luck in getting it right, how do I get my pics the right size?
View 3 Replies View RelatedI have a jpg file 1500x1024 pixels. If I resize it down to 400x300 and save it, the image quality is fine in the Gimp window. When I view it outside of Gimp, like in Image Viewer or FSpot its very blurry.
I resized the same image on a Mac using Photoshop and this did not happen, the resized image was perfect. Is it some sort of limitation in Gimp?
In the Scale Image dialog box the interpolation is set to Cubic. In the Save As jpeg dialog box I have checked Optimize Smoothing is set to 1.00 Subsamplingis set to Best Quality
I put a picture in gimp and when I go to print it it isn't a size anything like the picture in gimp. It's sometimes way bigger or smaller . How do I resize the picture to the size I want to print it.
View 3 Replies View RelatedI have a 70x70 image that i need to shrink down to 40x40 in the preview when i shrink it down the image looks bloody perfect, however when i select OK it just blurs everything up. why cant gimp just keep the quality it has in the preview? its like it deliberately wants to ruin my day. I reduced the image in Cubic and in Sinc but neither was good enough.
View 1 Replies View RelatedHow can I select exactly the image after I scaled it down? I want to make the canvas the same size.
View 2 Replies View RelatedRegarding Gimp version 2.8.2, I'm posting text to a picture, the trouble is when I highlight and try to resize the text it disappears. The text layer is still on top and the eye is still visable, so the text should be visable.. I have tried different fonts and colors and sizes with no success, things I can check to make this work again?
I did just reinstall this version today ( a couple of times ) and that is when the trouble started.
I can size the canvas perfectly, but when I add an image as a layer and try to resize the image, it will not resize to fit the canvas.
View 1 Replies View Related"best" ( or favourite) ways of resizing an image? I'm only talking about changing the file size in JPG to a smaller or larger one for saving, We tried something yesterday, which sort of worked, but I decided the best solution was just to re-scan the original image again, which came out a lot smaller (ks), even though both methods were set to achieve 200 dpi. I think that was under "scale image". (I have been used to using a method called "resample" in another program, where you can change the dpi or inches/mm and off it goes.)
View 1 Replies View RelatedI have a large amount of photos to send to a customer and i need to edit them to send by e-mail.
My question is does GIMP have a way to resize a large amount of images in one go instead of doing them one at a time.
I have a canvas and it's 2048x2048 the image is 2041x2041 but there's this ugly gap on the sides and if I use the zealous crop tool it changes the canvas to 2041x2041. This aint what I want.
I want the image to be 2048 with the canvas so, I do image resize, thinkin oh this will work.
but nah, if I image resize it changes the whole canvas, I just want the image to change, and besides that if the canvas is 2048 the image resize tool will say the Image is 2048 even though the image it's self is 2041. So I guess what I'm sayin is there's a bug or something which makes the image resize tool resize the canvas instead.
So how would I go about resizing my image to fit the 2048 canvas?
I am using the following code to upload and resize graphic files.
PHP Code:
I suggest having the ability to group layers, such that operations performed on the group would act on all the layers in that group simultaneously. This would allow making a whole bunch of items (each on their own layer), then moving/re-sizing/whatever the whole group of layers.
View 2 Replies View RelatedOk, so in photoshop there is this thing that when i resize or move around an image it will "stick" to the edges of the canvas allowing for an easier alignment, but this doesn't seem to be the case with gimp, so my question is: is there a way to activate those "sticky edges" in gimp while resizing a picture?
View 2 Replies View RelatedI'll come straight out and admit: yes, my real problem here is my laziness but, ignoring that, the 'problem' I have is getting so tired of and annoyed with the whole trial & error schtick that comes with saving animated gifs (scale image, save, check file size, repeat to first step until file size is finally desirable).
Two possible solutions come to mind, one I admit is probably quite unrealistic but I would think the other has a good chance of existing.
First, the unrealistic solution possibility. Is there a plugin or anything else where I can input a file size and it could calculate the exact (or close to exact) scale I would need to resize to if I want the gif to be around that file size? (i.e. "For this gif to be 879kb your best bet would (probably) be 515 x 283")
Now then, the more realistic (or at least I think it is) solution possibility. What about being able to preview a file size of an animated gif before saving? (i.e. "If you save this 400 x 226 gif it will most likely be '(insert byte size here)'kb")
I have a picture that is approximate 5 inches, by 10 inches. I want to blow the picture up to approx. 19x7 inches. But my question is, after I blow it up, and place it on a new image template, how will I know the "final" product will be proportioned correctly (with exact correct proportions as original pic) when I print it out.
Does GIMP "automatically" proportion the image correctly, or is there some mathematical equation/something to figure out the correct equation.
I created this using Gimp 2.6 on Mac 10.5: [URL].......
When I resize this to a smaller image, the text gets all distorted: [URL]......
I have been looking around on Google, but couldn't find much.Tried scaling with all the different ways (Linear, Cubical... etc). Also tried scaling from XCF and PNG files. Nothing seem to maintain the quality of the text on the image.
I have a GIF image that I need to add something to, but I don't want to add it to every single individual layer. Is there a way to add it over or behind the entire GIF so that it remains static while the GIF's frames cycle - like a watermark or something?
Or if not, is there maybe a script-fu that copies and merges a selected layer over every other individual layer automatically, without messing them up?
I know I'll probably have to just end up manually adding it to each layer, (so many layers...).
How do I make the edges of the top layer blend in with the bottom layer so you cannot tell that there is a line??? I want to make it look like a heart but I don't know how to smoothen the edges to make it look like it is part of the bottom layer so when I merge the layers there is no goofy lines looking like someone cropped another fire picture out...
fire3.xcf (Size: 489.68 KB / Downloads: 38)
I have two similar images where the subject has moved between the images. I have them in the same file as two separate layers and am using the subtract layer mode to identify where they differ, (roughly!).
I want to be able to use the subtract layer as a completely new layer so that I can make edits to it. The only way I have found to do this at the moment is to 'copy visible', but this still brings other elements that I don't want from where the layers overlap.