Photoshop :: Resizing The Layer Window
Mar 12, 2009
I am upgrading from cs2 to cs4 and I noticed the Layer window is 65px wider in cs4. I norrowed the change to the "Blending Modes' dropdown box. See screen shot. http://www.inspiredvisuals.com/test/tabwidth.jpg
Is there anyway to to resize the window further or change the blending modes drop down box to a smaller width like it was in cs2?
I know this sounds picky but every pixel available to workspace is important. I might be willing to pay if someone can help me out with this.
View 2 Replies
ADVERTISEMENT
Dec 11, 2008
I am trying to figure out a way to put 4 or 6 images on my screen and be able to move them around to compare them.
Am using Photoshop CS4 on PC and XP Home. I open 4 or 6 files and float all in windows. I then zoom out and make 1 image smaller, so it is smaller than the window. Then match zoom and location to get the zoom ratios the same. Now I have 4 or 6 images that are in windows that are larger than the image.
Is there any way I can make the windows smaller to be the same as the image other than do each one individually by dragging on the corner? Is there a shortcut to do this? Any way to adjust all the windows at once?
View 1 Replies
View Related
Jun 27, 2013
I have just upgraded from CS5 to CC (photoshop) and have lost the zoom resizes window facility, how to restore it?
I have checked the general preference 'zoom resizes window' but it makes not a scrap of difference - whether I use the zoom tool (cmdZ) or via the space bar+cmd / alt route or by using cmd+ or cmd-
View 3 Replies
View Related
May 11, 2009
Is there a way to set preferences so that when you maximize a window, it will stay in the workspace and not truly maximize and remove all the tools and layers windows? I've seen this questioned asked and I have not found an answer both in forums and in my trying to fix it. Sorry to pose it again, but its getting rather annoying - working on a big editing job and have to manually dock a window each time I need to copy and paste layers from one project to another.I appreciate your help if anyone knows how to do this or if its possible to do.
View 7 Replies
View Related
Aug 25, 2012
I recently migrated my data and software from a 27" iMac to a new 13" MacBook Air. I found that my CS6 window is sized beyond the boundaries of the 13" screen. I was able to drag the window sideways far enough to pull the right side within the 13" destop, but the bottom of the window is still below the bottom of my desktop and I cannot grab it or grab the corner to pull it up.
Â
I imagine that resetting CS6 to original defaults would fix the problem, but I have lots of saved actions and other settings that I do not want to loose.
View 6 Replies
View Related
Mar 10, 2014
how can I prevent the window from resizing when I drag the title bar?
View 6 Replies
View Related
Feb 28, 2013
I cannot enter new dimensions in resizing window. Has been fine up until now, but I can't click in the spaces to change. Am operating Elememts 8
View 1 Replies
View Related
Nov 22, 2013
I decided to go ahead with the upgrade at $29 and then immediately installed the SP1. Well now I have an issue that I didn't have before. When I use the scroll wheel to zoom in and out the window does not resize anymore along with the image itself (not using tabbed mode), there are settings in preference just for this type of action so the window should resize with the image while zooming if the settings are checked properly. I did a reset and reinstall without any results. Of course the reinstall includes the updated version now so I can't be sure if the SP1 is the cause or not.
The only thing different since my free trial period is I updated Windows 8 - 8.1 and installed the SP1. Any issue with or without W8.1 or after installing SP1?
View 2 Replies
View Related
Nov 14, 2012
resizing objects by changing the width and height values in the Transform window, while keeping the proportions of the object? When I try this in CS6, the proportions of the object gets totally botched.
Â
This is what I do:
1. Draw a straight line that is rotated some 30-40°.
2. Select the line and click in the W: or H: fields in the Transform window.
3. Make sure that the "Constrain Width and Height Proportions" button is selected.
4. Press and hold the up arrow key on the keyboard.
5. Watch how the line is rotated as it is scaled.
Â
I notice that while I'm pressing the up or down keys, the number in the selected width or height field is incremented nicely (21 mm, 22 mm, 23 mm, 24 mm, etc.), but when I release the key, it is adjusted to a seemingly random number (for example 24 mm -> 24.168 mm). If I switch between pressing up and down for some time, the adjustment can be even more random (24 mm -> 58,944 mm).
Â
I recently upgraded from CS3 where this type of scaling worked flawlessly. I'm using a MacBook Pro with OS X 10.7.5.
View 6 Replies
View Related
Aug 19, 2013
Every time I load any project (even one I saved and closed 5 minutes ago) After Effects resizes the window. I would like to disable this 'feature' how do I do that?
View 2 Replies
View Related
Aug 23, 2006
i double click my layer (its a text) and it just select the text and the window doesnt appear what do i have to do
View 2 Replies
View Related
Oct 5, 2006
I have a few images to merge together and having trouble.
I have a nice background and an image of a person with no background.
I create a new layer on top of my background and then import my image of the person. I can move it arround the layer but how do I make it smaller?
View 1 Replies
View Related
Aug 18, 2011
I'm fairly new to Photoshop. I'm trying to resize a image which I've pasted into a layer, I know how to Transform and rescale the image but I'd like to enter the width of the image in Pixels somewhere.
I'm designing an advert for a billboard, I've created an A4 landscape canvas and I'd like to put 5 images at the bottom of the canvas but I'd like to set them all to the same size which fits across the whole width of the canvas.
View 5 Replies
View Related
Jun 10, 2011
I've a problem with Gimp that comes from the fact that, when resizing a layer it becomes opaque, as if it were the foreground.
And the problem is that i wish to resize it to square it with another layer (that i don't see when resizing).
View 5 Replies
View Related
Aug 1, 2013
When I Select All/Copy a photo to Paste as New Layer on top of another photo, it always pastes as a humongous image. I have to scroll & scroll & scroll down to find grab handles, then fiddle & fiddle resizing the image to the same size as the underlying photo. I take the photos with the same camera. Seems to me the photos ought to be the same size!
View 3 Replies
View Related
Aug 20, 2005
I've just upgraded from Photoshop7 to CS2 and have noticed that the 'link' option have been removed from the 'Layer Window' (the little box which was next to the 'eye' that you could check to select certain layers and then manipulate those particular layers together like free transform, flatten etc.)
I normally use this feature alot and cannot find another way of doing it, is it possible to reinstate this feature or does anyone know a way of still doing this within CS2?
View 9 Replies
View Related
Apr 21, 2009
I am trying to work with photoshop 7 but not getting far as I can't see or find the small layer window which shows which layer I am working on.
View 1 Replies
View Related
Apr 6, 2013
Within the layer style window under the >bevel and emboss >Contour the option displaying images or list of contours is only opening to contour editor.
It's not displaying the contours within my collection I must've tripped off setting for displaying them but I can't find where that setting is, or if it's even available anymore? I don't believe I've used it since CS 3 or4. I'm using CS6 now but contours seems to have changed.
View 9 Replies
View Related
Aug 21, 2009
I just began having problems with Photoshop today. I wanted to apply Blending Options to a layer. The Layer Style window opened but it was nowhere to be found! Because I could not access this window to either perform a task or close it, I had to Control/Alt/Delete because nothing else in the program would work. Obviously, it was waiting for a response to the window but as I couldn't see it, I couldn't access it. I've never had this problem before and I've just spent four hours trying to find the problem, including messing with screen resolutions and monitor designations (I use a laptop with a flat screen as #2 monitor). Can someone please help me!!Thanks, in advance, for your advice.
View 3 Replies
View Related
Dec 12, 2012
I need to be able to re-size images that are large than 1MB in order to put them on our MLS site.
My previous computer had 2 arrow icons on the desktop.
One was for re-sizing horizontal pics and the other for re-sizing vertical pics.
I could simply drag/drop the image file onto these re-sizing icons and they would be re-sized.
The smaller file size thumbnail would appear on the desktop.
How can I get these re-sizing tools on my new computer's desktop?
I am using CS6.
View 6 Replies
View Related
Jul 29, 2013
As soon as you set a color for a layer listed in the layer window, you can't undo that. The "no color" selection in the context menu does nothing. Looks like a bug.
Â
And btw. on page [URL] ...... the link "User Groups" points to [URL] .... which isn't delivering anything ("No data received").
View 1 Replies
View Related
Jun 23, 2011
I have a document with three layers, nothing fancy. I want to make one of the layers bigger. The docs say use the selection tool (in my case the rectangle tool) to make a selection. They say if you want to resize the selection just grab on of the handles. This works as it should. However I want to resize my layer, which is essentially a square image. I can't see where to do this. The layer properties don't even show the size of my layer. Is there some way to open the layer in another window?
View 2 Replies
View Related
Mar 1, 2011
I recently had to re install my copy of Autocad2008 so it has been stripped back to basics.
Basically what I am after is I want to be able to click on a layer and see what layer it is on. I used to have a window on the title bar which would let me do this and I could then click into that window to change any layers. How to get that layer window back into my title bar?
View 9 Replies
View Related
Aug 21, 2012
Is there a way to select all the layers in the Layers Window? is: I've got a GIF animation that's comprised of 590 individual layers, and to work on specific layers, It'd be convenient to be able to hide all the layers other than the layer I'm working on - maybe with a dialog under Layers>>Stack>>Select all Layers>>Hide, or an "eye" checkbox at the top or bottom of the Layers window that would select all layers, thereby allowing me to "unhide" the selected layer by checking the "eye" ,(show), checkbox of the relevant layer.
Currently, the only way I know of to work on a specific layer within such a stack is to move the layer to the top of the stack so it becomes the visible layer, perform the work, then return the layer to its original location.
View 4 Replies
View Related
Jul 28, 2012
The layer properties window, it opens smack bang on the middle of the image I'm working on. So extremely annoying to always first having to move it off the image, before I can see the effect I'm using. Especially when working with multiple layers. Is there a way to have this window open on the SIDE of the image one is working on? Instead of on top of it, hiding it?
View 19 Replies
View Related
Jun 18, 2012
When I click the layer prop. man. icon, I get a list of all the possible commands, but not the window it's supposed to show.
View 2 Replies
View Related
Sep 16, 2009
In ACLT 2008, I was able to resize the window in the layer properties manager to what was convenient for me. In ACLT 2010, I am unable to change either the size or the position of the window. The same is true of the Design center window. Is this something that is permanently changed, or is there maybe a fix coming to allow this convenience in the future? Or have I missed some system variable which controls this?
View 3 Replies
View Related
Mar 14, 2012
Civil 3D crashes when I open the Layer Properties window. What is the best way to fix this issue? Will the standart AutoCAD 2011 1.1 and 2 updates work?
View 1 Replies
View Related
Jul 2, 2009
i am using Acad 2005 for two years. since now i started to use acad 2010. i did find the difference in layer isolation in 2005 if you do layer isolation, only the particular layer visible. then can be select all of them in one window. without disturbing other layers. but in 2010 while i isolate a layer, other layers also visible in the backround. when i select the isolated layer in one window, also the backround layers also getting selected.
i am facing problem in selecting the isolated layer all objects in one window.how to do selection or how to work on that?
View 9 Replies
View Related
Nov 8, 2012
I've lost the layer box in single window mode. I can get it back if I re-install, but I do not want to loose and the added scripts. How does one get it to load back into the window. (running mac).
View 4 Replies
View Related
Oct 8, 2012
When I click on the new layer window, half of it opens off the screen (see screenshot). Attached File(s)Â Gimp Bug.png (59.06K) Number of downloads: 7
View 2 Replies
View Related
