Is this the only place now? I thought it was available in Edit mode. What about all the people (and there are a lot of us) who only use Edit mode? Surely it was available in before the last service pack? Who has not installed SP2 know? We have this in all previous versions of PSP that I have used.
View 3 RepliesI want to turn OFF autosave. I cannot handle frequent interruptions while cloning, painting, ... etc. as PSP saves my large file every other minute!!!
I have looked at the AutoSave Preferences, and read the related HELP, but cannot turn Autosave off as documented. There is no check box next to the "Save edits ..." line in the Preferences --> Autosave Settings on the Adjust Workspace tab. My only option is to say OK or cancel. I cannot change anything!
Just updated from X3 to X4. Spent an hour looking for the workspace color so I could get rid of the huge graphite box. Updated to SP1, found this forum, saw how to change the color in the files menu, and was very disappointed that the menu backgrounds changed, but not the BIG GRAPHITE BOX IN THE MIDDLE OF THE SCREEN!!
X3 gave us control of the colors. X4 is a big disappointment.what about the big graphite elephant in the room, the workspace?
I have a custom workspace I like quite a bit. In X4 I save it to Users/Owner/My Documents/Corel Paint Shop Pro/14.0/Work spaces..... I believe that is the default folder. I had some trouble with X4 and reloaded it and lost my workspace, so I recreated it. So now when I look in there I see 2 workspaces, cleverly labeled workspace1 and workspace2 and described in the type as Corel PSP Workspace File. Well, no big problem with X4, but I opened it and had the default workspace.
When I go to load a workspace, it doesn't see the ones I have saved. I hit load and no workspaces show up (although I have checked in my preferences under workspace and the correct folder is listed.) If I hit load and then try browsing to it and again no work spaces show up. I have tried to save the current workspace under the clever title "test" and it goes into the same folder. Even stranger, when I go to load work spaces, the "test" workspace shows up. I created both workspace 1 and 2 in X4, not X3...... so what's up.... how come I can't load a workspace?
In the X3 version there was a menue setting for the color of the work space where you could change it and not have to use the Graphite color. In the X4 version there is nowhere to select non default color. There should be as not everyone wants to be forced into having it the default"graphite or whatever"color.
View 10 Replies View RelatedWhen I Save a workspace, I untick Include Open Images. I have always done this. When I save a workspace in X5, the 'Include Open Images' is always ticked. I un-tick it and save the workspace. X5 then asks me if I want to save changes to the open images in the workspace. Why? I click on No, repeated for all the images that are open at this time.
I then click on Save a Workspace again and yes, the Include Open Images is ticked again. In previous versions of PSP this remained unticked until the user ticked it again.
In PSPP X3 I could easily get rid of the graphite interface (it hurts my eyes). I've downloaded the trial and really liked the speed, but cannot find anything in knowledge base, user guide, search from these boards or on internet to explain where it is if there is such a thing. I could not purchase it if it's not possible.
View 3 Replies View RelatedEvery time I resize an image, the image in the workspace shows at a certain percent and I have to scroll to zoom in to view it at the normal size. The percent varies from image to image.
View 4 Replies View RelatedI have a workspace saved as Default.PSPWorkspace. Every time I start PSPX4 I have to select File > WorkSpace > Default.PSPWorkspace so that all the settings for Palettes and Toolbars are as I need them.
Is there any way to set a saved workspace to actually serve as the default without having to select it every time PSPX4 starts?
Re: PSPX6 16.1.0.48 32-bit
I got a message to install service pack 1 this morning. Since then every time I load PSP the workspace is the default workspace and all of the tools I had added to the toolbars are missing. If I load my custom workspace from the load menu, it makes no difference, it just refreshes the screen and nothing changes. Also every time I load the program it displays the Learning Center and Organizer tabs, even though I keep disabling them.
I tried resetting everything back to the defaults but it doesn't work. Should I do a new re-install or is there something I'm missing?
How do i use my topaz adjust plugin with X4 ( trial version ) ? It works fine with my X1. How and where do i find an email address where i can ask such questions to corel ?
View 4 Replies View RelatedI can open PSP X4 and edit and process images as desired. My workspace opens to Edit, as I've located that menu selection. I do not have any saved workspace configurations/files. Based on what I've read in the few hundred messages so far, I'd like to avoid a full reset of the program defaults, but if that's the only option, so it goes.
What is happening is that in as-yet undetermined situations, I get an automatic load of an old image. I've been able to recognize that the image that happens to load is the first one in the tray on the Manage tab. I don't use the Manage tab at all and only ventured over there as part of the preliminary diagnostic process to posting this message. Once I discovered that, I renamed the image in the tray and the sequence repeated with the next image in the tray, which repositioned itself to the first location.
I can "force" an auto-load in the edit window simply by starting with an empty edit window, clicking on the Manage tab and then back to the edit window. The first image in the tray magically appears. This magic also happens when I've closed another image that's been loaded. Of course, now that I'm posting this, I can't make it happen other than in the manner described above.
I'd like to have it so when I close the image in the edit window that I'm left with a blank edit window on a consistent basis. If I can determine how the image auto-loads in a manner different than described above, I'll add it here.
what is the purpose of the histogram display on the adjust pane. can it be modified from there? Also - what is the purpose of the four boxes below the histogram display?
Together they take up too much real estate to be there just for looks .
Whenever I go from Edit to Adjust (or Manage) the photo disappears. I can retrieve it if I go to open. I assume that the photo should show up when I go from Edit to Adjust or Manage.
View 6 Replies View RelatedI don't know if it is obvious but I couldn't see this shortcut in the Paintshop X4 User Guide. So, I am sharing:
By pressing "shift + a" will make "manage/adjust/edit" tabs disappear. To show the tabs, it is just necessary to press "shift + a" again. It will give more workspace. This feature just works when you are in "edit" tab. In the other tabs none happens.
Usually I only use Edit Mode in X4.Recently I have been exploring Manage Mode and now decided to try Adjust Mode.I have found that everytime I leave Adjust Mode to go to Edit Mode or Manage ModeI get an error "Encountered an improper argument".
View 14 Replies View RelatedI purchased PSP 5 and uninstalled PSP 4. After installation, I am unable to see any image previews in manage, adjust or edit mode. I have installed the service pack updates with no change in this absent function. Neither the main window nor the organizer palette will display any jpg image previews. I CAN go manually to a specific file and open the image and edit it at will, but I cannot see any previews of any images in the main or organizer palette. how to get the program to display image previews. I never had this problem before in any of the previous PSP versions. I have also uninstalled, rebooted and reinstalled the program to no avail.
View 2 Replies View RelatedJust came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies View RelatedIm trying to create a logo similar to the Harley Logo for a friend's wedding. Their last name begins and ends with "S" and Im trying to replicate the "S" in the Harley Logo.
If I copy and paste the Harley "S" on the right side of "Cycles".. it's a no brainer. If I copy and paste the "s" in Cycles and try to move it to the left for the first letter in their last name.. I can't seem to bend it the right way so the bottom of the S follows the curvature of the shield like the other one..
I'm working now on a project with canvas size A4 (5600x4200).i'm working with large objects and small objects each in its own layer.i wanted to align few object in a certain way and i wanted to use the grid for this.however the grid is so small and can only be seen using 66% and more zoom in. which makes it impossible to align the object since i can't see all of them together.
is there any way to adjust the grid to be in proportion to the correct zoom or not window ? as a workaround i found is the grid plugin , but with it i must recreate the grid for each zoom size and its hard to work like this. having the grid adjusted automatically or at least allow max/min setting for it so it can be seen in an A4 size canvas.
If there is a tool where I can take a selection & adjust it all different directions? I'm looking along the lines of taking a text selection & doing what I did with "flounder" & "Harmonic prophecy" in the attached pic. Nothing fancy. Just something I can't figure out. I used a different program to do that flier.
View 2 Replies View RelatedI would like to save the workspace to a CD as a backup in case the one in use becomes degraded. Can this be done. If so, what files should I save.
View 4 Replies View RelatedI installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies View RelatedI know this has to do with Anti-alias but as far as I can see , Paint.net only has this option as On or Off.
I would like to be able to adjust the aggressive of smoothing quality. This would allow me to draw very smooth curve with minimal effort using a mouse.
Gimp 2 has this option Smooth stroke I really like it but too bad, gimp 2 is slow to load and is not as lean as Paint.net. I suppose it should be something like a setting, not an effect that applies after the curves have been drawn.
Here is to demonstrate the effect : It is smoother, I drew it by a mouse
I am running Corel Draw X6 64 Bit on a new Windows 7 Pro 64 bit Laptop. All current updates applied. V 16.2.0.998
If I check off "Select workspace at startup" every time I start Photo-Paint the workspace selection box is hidden behind the splash screen!
I've tried resetting my profiles.How do I get the selection box on top?
I just downloaded 2013 Autocad for MAC and I can't manage to see my drawing toolbars and also don't know where to find workspace settings to change my workspace to autocad classic.
View 9 Replies View RelatedI am trying to go from the 3D Modeling workspace to the 2D workspace without the XYZ coordinate gizmo on the drawing screen (just want to see the XY ucs) to work in 2D format.
View 1 Replies View RelatedThe first thing I do with any new drawing tool is
1. Draw a square.
2. Select the square.
3. Begin tweaking the square's properties--stroke width and color, fill, pattern, etc.
So how do you select the object you just drew? All I'm seeing is 'select an area' tools, which of course won't work for adjusting a specific drawing object.
I want to know if I can use Paint.Net DLL's in a personal proyect to adjust image quality.
Specially, I interested in Autolevel adjust.
When I try to open photo paint x3, a box pops up that says "Valid workspace file not found at the path specified." I click OK, then the box pops up again. Click OK once more then the program closes.
View 4 Replies View Relatedis there a way to have the profile be on 2d drafting already as yoju open a new file or should you always open a new file and then change the profile from architecture to 2d drafting?
View 2 Replies View Related