Whenever I go from Edit to Adjust (or Manage) the photo disappears. I can retrieve it if I go to open. I assume that the photo should show up when I go from Edit to Adjust or Manage.
View 6 RepliesI don't know if it is obvious but I couldn't see this shortcut in the Paintshop X4 User Guide. So, I am sharing:
By pressing "shift + a" will make "manage/adjust/edit" tabs disappear. To show the tabs, it is just necessary to press "shift + a" again. It will give more workspace. This feature just works when you are in "edit" tab. In the other tabs none happens.
I purchased PSP 5 and uninstalled PSP 4. After installation, I am unable to see any image previews in manage, adjust or edit mode. I have installed the service pack updates with no change in this absent function. Neither the main window nor the organizer palette will display any jpg image previews. I CAN go manually to a specific file and open the image and edit it at will, but I cannot see any previews of any images in the main or organizer palette. how to get the program to display image previews. I never had this problem before in any of the previous PSP versions. I have also uninstalled, rebooted and reinstalled the program to no avail.
View 2 Replies View RelatedIs it possible to delete/add to/rename folders listed in the Computer tab of the left pane of the Manage window?
View 3 Replies View RelatedI want to work with more then one picture at the same time and I want to be able to open more pictures during my work. With version X3 I could switch between Manager and Edit to open more pictures. Now the program closes all opened pictures if I switch from "Edit" to "Manage". Is that as it should work now?
How can I open the browser inside the Edit area? I could not find a function or Icon to do that. I just found the possibility to use the function 'Dual Monitor'.
If I select the function 'Dual-Monitor' the program changes my selected setting (Thumbnail Mode) to Preview Mode and I cannot change it anymore. Is that as it should be or is it a bug? I want to work with Thumbnail mode and not with Preview Mode.
I have Dual-Monitor switched o and restart the program. Now the two tasks are not opened on my two screens. I currently see the Edit screen and cannot switch to the Manager. Even with the task manager I cannot switch to the Manager of PSP. When I closed the program after switching on Dual-Monitor I had both tasks on different screens and so I would have expected to get it with the next start of the program.
If I open more then one picture I get a task in the taskbar for each opened picture. That seem to be very strange for me. I do not have more then one task of the program. I have several opened pictures in own windows (not tabbed) in one program.
PSP X4 opens in the Edit page. When I select the "Manage" tab, the program freezes and I need to use the Task Manager to shut the program down.
I contacted Corel and they told me to reinstall the program. I have done so but the problem still persists. I have the service pack 2 installed.
Windows 7 Home Premium
Dell 64 bit, 3.2 GHz
memory 12gb
Intel i5
I don't think that my PSP X5 (or X4) is presenting the images the way the tab had intended. I've done several complete re-installs and the remainder of the program seems to be working, except for the Manage tab. I can see the images displayed in the tray portion of the window and the highlighted image name shows above the large preview window, however there is no image in the preview window.
The area becomes populated with images if I switch to the Thumbnail view, but the small preview window palette is blank. If, while in the Preview mode if I click on one of the effects, the effect is created in the tray. Another thing that I've noticed is if I use the Magnifier tool in the empty area (where the preview should be) I can actually see the magnified image in the tool.
The first comment is when starting X4, viewing MANAGE tab and mousing over INFO pallet which is in auto-rollup mode on the upper right margin, Info opens to the General tab. It would be best for me to see the EXIF data as default. Maybe X4 could remember what Info tab is/was displayed?
Secondly, my Canon PowerShot SX230 has GPS tagging capability, and I'm not seeing GPS coordinates in ANY of the Info tabs. I think this info is necessary and is one of the reasons I bought the camera. Corel could include HYPERLINK capabilities in the Info space someday. See attached view of Canon Map Utility. How about an EXPORT to Google Earth function with mapping data and photo attachment?
I have just installed PSP X5.
Problem 1. When I open the program and go to Manage, the files on my hard drive are listed. When I click on one of the folders the program stops responding and I must end it with Task Manager.
Problem 2. None of the files on my external hard drives are listed. When I add thaose folders to the Navigation window the message "No files found" appears in the Organizer.
When I double click on a file in Windows Explorer it opens in PSP as it should. The program is useless as it is. How to proceed?
I have reinstalled 2X
I have deleted all temp files.
I have lots of space on my hard drive
Windows 7 Pro
Noticed this when going through my photos tonight. When using the full screen preview in the Manage workspace, a photo will become more magenta after every pass.
Duplicate this by:
1. Double click on an image in the manage workspace to bring up the full screen preview. Take note of the colors.
2. Press the right arrow on your keyboard to advance to the next image.
3. Press the left arrow on the keyboard to return to the original image. Examine the colors...for me it is slightly more magenta. To make this change more obvious switch back and forth between the original and 2nd image. For me, the images become extremely magenta.
I'll include 2 images of one photo....the only difference being that the "magenta" one has gone through the process above 6 times.
[URL]..........
PSPX5 on a Win7 machine.I've been using this program a long time. Been using this setup for almost a year. Suddenly, the "preview" pane of the the "manage" tab has just quit working. It's whited out. I click on a thumbnail and the image info shows on the side pane, but the main frame just remains white. I've tried restarting the machine, to no avail. I can try uninstalling and reinstalling, but would rather not.
View 5 Replies View RelatedI am using Paint Shop Pro X5 Ultimate.The Preview Window of the Manage Tab seemed to be displaying photos oddly - the photo wasn't filling the preview window (it was leaving an area around the bottom and right-hand side of the photo). At first I thought it was just the zoom setting, so I zoomed in. However, I have now used several features of the software that seem to show that the Preview Window (only on the Manage Tab) is incorrectly displaying the preview.
The problem became further evident when I used the Find People feature of Paint Shop Pro to locate the faces and tag several people, however the position of the tags are as if the Preview Window is filled by the photo. I have attached a screenshot that shows that the tag for the person in the bottom right-hand corner of the photo has her tag positioned off the photo (outside of the border of the photo) to the bottom and right of the photo even though it was automatically placed by the software. The position of the tags for the people in the photo are all offset slightly to the right and down and would be correct only if the photo was displaying correctly in the Preview Window.
I have tested uploading the photos to Facebook and the tags appear correctly once on Facebook. If I manually tag the faces as they appear on the Preview Window, the tags are incorrectly placed once the photo has been uploaded to Facebook (they appear up and to the left of where the face is positioned in the photo.
I have tried resetting the preferences and turning off some display features of Microsoft Windows, but I have seen to changes in the Preview Window.
Properties of your source files (format, file size, where did you get it?) The example photo was taken in .jpg format using a Nikon D3100 and 18-200mm Nikon DX lens, though this affects my entire photo collection taken on several different cameras and in several different formats (including RAW).
What devices are involved and their mode of connection? The files were transferred directly from the camera to the computer using a USB cable. Project Properties:I was using the Manage tab to sort photos and tag people using the Find People feature and also tried manually tagging faces.
I've downloaded new jpg picture files twice over the last 2 months. When I open PSPro X5 in MANAGE mode the new file folders names show on the folder tree but no picture files show in the Organizer photo tray when the folder is selected. Folders on tree before the 2 latest display pictures okay. I have no ability to select photos to edit from the MANAGE mode in those latest folders. Folders and photos appear normally in EXPLORER.
View 6 Replies View RelatedIf I work in Edit mode all the time I can open as many pictures as I like from the Organizer and have them all open at the same time. If I return to the Organizer and open another image, the ones already open are not affected. However if I go to the Manager tab (which only seems to be the Organizer on a separate page) to select an image I have to close any and all items already open in the editor. Surely this cannot be intended behaviour. In X3 it was possible to open images in the Organizer which was on a separate page and then return to it and open others without the original ones closing so why can't we do this in X4? The Manager does allow multiple images to be selected and opened at the same time but these are still closed if at any time you return to the Manager.
Update: I have now read a few posts about this problem and indeed it is not possible to switch between Edit and Manage modes without closing any images you have open for editing. The general feeling seems to be that this is not a problem as the Organizer (File manager) is available in Edit mode anyway so there is no need to go to the Manage tab. However I would disagree with this as some of my folders contain large numbers of images and it is much easier to browse through them using Manager in thumbnail mode as you can see far more images at once than with the Organizer in Edit mode. Also I find that Organizer gets in the way in Edit mode and would much prefer to switch back and forth to the Manager as was possible in X3.
Even if this problem does not affect everyone it is still difficult to understand why Corel would insist that images in the Editor are closed before switching to Manage mode. I cannot personally think of one reason why this would be preferable. Additionally the Organizer in Edit mode does not appear to have any way of resizing the thumbnails to optimize the number viewable at any one time.
I was trying to find all the photo files on my drives with X5 in manage mode. Ran very slow, when I went to close message said clipboard very full. How do I get into the clipboard and reduce it's size?
View 5 Replies View RelatedIs this the only place now? I thought it was available in Edit mode. What about all the people (and there are a lot of us) who only use Edit mode? Surely it was available in before the last service pack? Who has not installed SP2 know? We have this in all previous versions of PSP that I have used.
View 3 Replies View RelatedHow do i use my topaz adjust plugin with X4 ( trial version ) ? It works fine with my X1. How and where do i find an email address where i can ask such questions to corel ?
View 4 Replies View Relatedwhat is the purpose of the histogram display on the adjust pane. can it be modified from there? Also - what is the purpose of the four boxes below the histogram display?
Together they take up too much real estate to be there just for looks .
Usually I only use Edit Mode in X4.Recently I have been exploring Manage Mode and now decided to try Adjust Mode.I have found that everytime I leave Adjust Mode to go to Edit Mode or Manage ModeI get an error "Encountered an improper argument".
View 14 Replies View Relatedi like my layout to look like this.
[URL]........
in particular i'm referring to the pallets on the right hand side. but whenever i put them like that, and close psp next time i open it it looks like this
[URL].........
so every time i launch psp, literally every time i have to move the pallets around. then sometimes, if i drag in a large image it does this:
[URL].........
Is there a way to move a selection without it becoming a floating selection in PSP X6 ?
Every time I select a part of the image and try to move it, it becomes a floating selection and then I have to go to the menu and defloat.
Is there a way in X6 to move parts of image without the float, defloat process ?
Can you move a path from one vector to another?
View 8 Replies View RelatedI am using PSP version 6.10.48 - 64 bit on Windows 7.
I saw a video and read some instructions about adding and modifying text and I just keep getting confused. For the most part, I am trying to add some text to a photo and I get messed up.
I am using a Nikon D7000 and shooting in RAW format. Recently, I took some time exposures of Niagara Falls at night, to capture the colors and the lighting on the falls.
When I view the files in the media tray, everything looks alright. However, if I select a photograph to look at more closely, , some sort of automatic brightness adjustment is taking place which brightens my foreground and washes out the color on the main part of my image. This process changes the histogram of the photo. When I move to Express Lab or Full Editor and choose "Smart Photo Fix", and reset various settings to "Original", it doesn't bring the photo back to its original appearance, so clearly there are other settings that have been automatically adjusted as well.
I've looked into the Preferences menus, but can't find anything that will turn off this automatic adjustment process.
1. An adjustment layer.
2. A luminosity mask for that adjustment layer.
Uploaded with ImageShack.us
Wanted: I want to edit that adjustment layer's mask in the editing area, viewing the mask as a black and white image.
Current procedure:
1. Create a new raster layer.
2. Change the Foreground Material to black.
3. Select the Fill tool.
4. Fill that new raster layer with black.
5. Move that black raster layer below the adjustment layer.
6. Select the adjustment layer.
7. Open the Properties of the adjustment layer.
8. Change the overlay colour to white.
9. Change the overlay opacity to 100%.
10. Select "Highlight Mask Area" in the Layers palette.
Questions:
1. Is there an easier way to do this?
2. If not, I've recorded a script that starts with the adjustment layer selected, but the script fails when attempting to move the new raster layer below the adjustment layer.
I had hoped to go from CS4 to Paintshop Pro 4 to process my photos. PSP4 is not working as it should. I begin the edit, get almost through and PSP freezes. My pc has plenty of RAM and storage space. CS4 has never done this. I open up to 10 RAW files at once in CS4 with no problems. I have searched Corel and the web for a clue as to what is going on. I want to leave Adobe and am currently looking for a software replacement. I have used PSP in the past. I stopped using it with the X3 release due to the error messages it gave me and went with Adobe.
View 4 Replies View RelatedI try to add a new toolbar to my "edit" menu on PainshopPro X5 but i cannot find it ? This toolbar is in the "photo gestion" tab, but i want to add it on my "edit photo" tab !
A picture is worth a thousand words:
This "info tab" on the upper right :
That I try to add to my "photo gestion" tab:
I've come across an issue using X6 I haven't seen before. After working on a multi-layer pspimage file, saving it and reloading I can no longer edit one of the raster layers. When the layer is selected with the pick tool it shows the circle with line when mousing over. It was not merged or locked so not sure what's causing this and never came across this with any of the previous PSP versions I've used.
PSP X6 16.1.0.48
UPDATE: Tried making sure it was the top layer and still could not edit the layer. I then made all the other layers invisible and at that point it would allow editing the image. Is there some hidden feature in X6 I'm missing or is this a quirk?
1. Batch Edit Add Background PSP X2
2. 10 Photos of varying sizes "BATCH" pasted to a 8x10 Black Background
3. PSP X2 with XP Proff with Srv Pak 3
How to add a common, black, 8 x 10, black background to several photos of different sizes smaller than 8 x 10?
All will be used in Windows Movie Maker to create a Musical Slide Show
When I open up an editing box. ie Local Tone Mapping, Adjust Brightness/contrast etc etc, the box that opens up is only partially on screen, you cant drag it into a different position because the top part where you click to drag is off screen, even if I semi minimise the window it is still off screen. Is there a way when these are opened to dock them to one side or to a permanent position. Windows 7 64bit - PSPP X3
View 2 Replies View RelatedI'm now getting this error: "Unable to open the file. Please verify that the file is valid.", when attempting to edit a jpg.
(no problem with png's though).
Any new jpgs I create outside PSP display like this in the manager (but a new png displays OK):
Existing jpg thumbnails display OK (I expect the thumbnail images are cached somewhere), but if I try to edit any jpg, I get this:
I've checked for PSP X5 updates, and I'm on the latest version:
Note: I can view the images successfully with Windows photo viewer and I can edit them using Windows Paint, it's just PSP that's having issues.
EDIT: I'd restarted my PC to ensure I was still having the issue, and I still couldn't edit any jpgs. While I've been writing this post and taking screenshots with the snipping tool, suddenly the jpg thumbnails displayed correctly and now I can edit jpgs again... BUT...