I was trying to find all the photo files on my drives with X5 in manage mode. Ran very slow, when I went to close message said clipboard very full. How do I get into the clipboard and reduce it's size?
View 5 RepliesThe first comment is when starting X4, viewing MANAGE tab and mousing over INFO pallet which is in auto-rollup mode on the upper right margin, Info opens to the General tab. It would be best for me to see the EXIF data as default. Maybe X4 could remember what Info tab is/was displayed?
Secondly, my Canon PowerShot SX230 has GPS tagging capability, and I'm not seeing GPS coordinates in ANY of the Info tabs. I think this info is necessary and is one of the reasons I bought the camera. Corel could include HYPERLINK capabilities in the Info space someday. See attached view of Canon Map Utility. How about an EXPORT to Google Earth function with mapping data and photo attachment?
I have just installed PSP X5.
Problem 1. When I open the program and go to Manage, the files on my hard drive are listed. When I click on one of the folders the program stops responding and I must end it with Task Manager.
Problem 2. None of the files on my external hard drives are listed. When I add thaose folders to the Navigation window the message "No files found" appears in the Organizer.
When I double click on a file in Windows Explorer it opens in PSP as it should. The program is useless as it is. How to proceed?
I have reinstalled 2X
I have deleted all temp files.
I have lots of space on my hard drive
Windows 7 Pro
I've downloaded new jpg picture files twice over the last 2 months. When I open PSPro X5 in MANAGE mode the new file folders names show on the folder tree but no picture files show in the Organizer photo tray when the folder is selected. Folders on tree before the 2 latest display pictures okay. I have no ability to select photos to edit from the MANAGE mode in those latest folders. Folders and photos appear normally in EXPLORER.
View 6 Replies View RelatedPSP X4 opens in the Edit page. When I select the "Manage" tab, the program freezes and I need to use the Task Manager to shut the program down.
I contacted Corel and they told me to reinstall the program. I have done so but the problem still persists. I have the service pack 2 installed.
Windows 7 Home Premium
Dell 64 bit, 3.2 GHz
memory 12gb
Intel i5
I have 6 external hard drives containing NEF / JPG and DNG files plus i have some more recent photos on my laptop hard drive some of the files are the same on several of the drives (backup copies)
what would be the best way to merge all this into a single LR 4 catalog ?
or would it make sense to have a separate catalog for each external drive ?
I only have one drive connected to the computer at one time
Is it possible to delete/add to/rename folders listed in the Computer tab of the left pane of the Manage window?
View 3 Replies View RelatedI don't think that my PSP X5 (or X4) is presenting the images the way the tab had intended. I've done several complete re-installs and the remainder of the program seems to be working, except for the Manage tab. I can see the images displayed in the tray portion of the window and the highlighted image name shows above the large preview window, however there is no image in the preview window.
The area becomes populated with images if I switch to the Thumbnail view, but the small preview window palette is blank. If, while in the Preview mode if I click on one of the effects, the effect is created in the tray. Another thing that I've noticed is if I use the Magnifier tool in the empty area (where the preview should be) I can actually see the magnified image in the tool.
Whenever I go from Edit to Adjust (or Manage) the photo disappears. I can retrieve it if I go to open. I assume that the photo should show up when I go from Edit to Adjust or Manage.
View 6 Replies View RelatedNoticed this when going through my photos tonight. When using the full screen preview in the Manage workspace, a photo will become more magenta after every pass.
Duplicate this by:
1. Double click on an image in the manage workspace to bring up the full screen preview. Take note of the colors.
2. Press the right arrow on your keyboard to advance to the next image.
3. Press the left arrow on the keyboard to return to the original image. Examine the colors...for me it is slightly more magenta. To make this change more obvious switch back and forth between the original and 2nd image. For me, the images become extremely magenta.
I'll include 2 images of one photo....the only difference being that the "magenta" one has gone through the process above 6 times.
[URL]..........
PSPX5 on a Win7 machine.I've been using this program a long time. Been using this setup for almost a year. Suddenly, the "preview" pane of the the "manage" tab has just quit working. It's whited out. I click on a thumbnail and the image info shows on the side pane, but the main frame just remains white. I've tried restarting the machine, to no avail. I can try uninstalling and reinstalling, but would rather not.
View 5 Replies View RelatedI don't know if it is obvious but I couldn't see this shortcut in the Paintshop X4 User Guide. So, I am sharing:
By pressing "shift + a" will make "manage/adjust/edit" tabs disappear. To show the tabs, it is just necessary to press "shift + a" again. It will give more workspace. This feature just works when you are in "edit" tab. In the other tabs none happens.
I am using Paint Shop Pro X5 Ultimate.The Preview Window of the Manage Tab seemed to be displaying photos oddly - the photo wasn't filling the preview window (it was leaving an area around the bottom and right-hand side of the photo). At first I thought it was just the zoom setting, so I zoomed in. However, I have now used several features of the software that seem to show that the Preview Window (only on the Manage Tab) is incorrectly displaying the preview.
The problem became further evident when I used the Find People feature of Paint Shop Pro to locate the faces and tag several people, however the position of the tags are as if the Preview Window is filled by the photo. I have attached a screenshot that shows that the tag for the person in the bottom right-hand corner of the photo has her tag positioned off the photo (outside of the border of the photo) to the bottom and right of the photo even though it was automatically placed by the software. The position of the tags for the people in the photo are all offset slightly to the right and down and would be correct only if the photo was displaying correctly in the Preview Window.
I have tested uploading the photos to Facebook and the tags appear correctly once on Facebook. If I manually tag the faces as they appear on the Preview Window, the tags are incorrectly placed once the photo has been uploaded to Facebook (they appear up and to the left of where the face is positioned in the photo.
I have tried resetting the preferences and turning off some display features of Microsoft Windows, but I have seen to changes in the Preview Window.
Properties of your source files (format, file size, where did you get it?) The example photo was taken in .jpg format using a Nikon D3100 and 18-200mm Nikon DX lens, though this affects my entire photo collection taken on several different cameras and in several different formats (including RAW).
What devices are involved and their mode of connection? The files were transferred directly from the camera to the computer using a USB cable. Project Properties:I was using the Manage tab to sort photos and tag people using the Find People feature and also tried manually tagging faces.
If I work in Edit mode all the time I can open as many pictures as I like from the Organizer and have them all open at the same time. If I return to the Organizer and open another image, the ones already open are not affected. However if I go to the Manager tab (which only seems to be the Organizer on a separate page) to select an image I have to close any and all items already open in the editor. Surely this cannot be intended behaviour. In X3 it was possible to open images in the Organizer which was on a separate page and then return to it and open others without the original ones closing so why can't we do this in X4? The Manager does allow multiple images to be selected and opened at the same time but these are still closed if at any time you return to the Manager.
Update: I have now read a few posts about this problem and indeed it is not possible to switch between Edit and Manage modes without closing any images you have open for editing. The general feeling seems to be that this is not a problem as the Organizer (File manager) is available in Edit mode anyway so there is no need to go to the Manage tab. However I would disagree with this as some of my folders contain large numbers of images and it is much easier to browse through them using Manager in thumbnail mode as you can see far more images at once than with the Organizer in Edit mode. Also I find that Organizer gets in the way in Edit mode and would much prefer to switch back and forth to the Manager as was possible in X3.
Even if this problem does not affect everyone it is still difficult to understand why Corel would insist that images in the Editor are closed before switching to Manage mode. I cannot personally think of one reason why this would be preferable. Additionally the Organizer in Edit mode does not appear to have any way of resizing the thumbnails to optimize the number viewable at any one time.
I want to work with more then one picture at the same time and I want to be able to open more pictures during my work. With version X3 I could switch between Manager and Edit to open more pictures. Now the program closes all opened pictures if I switch from "Edit" to "Manage". Is that as it should work now?
How can I open the browser inside the Edit area? I could not find a function or Icon to do that. I just found the possibility to use the function 'Dual Monitor'.
If I select the function 'Dual-Monitor' the program changes my selected setting (Thumbnail Mode) to Preview Mode and I cannot change it anymore. Is that as it should be or is it a bug? I want to work with Thumbnail mode and not with Preview Mode.
I have Dual-Monitor switched o and restart the program. Now the two tasks are not opened on my two screens. I currently see the Edit screen and cannot switch to the Manager. Even with the task manager I cannot switch to the Manager of PSP. When I closed the program after switching on Dual-Monitor I had both tasks on different screens and so I would have expected to get it with the next start of the program.
If I open more then one picture I get a task in the taskbar for each opened picture. That seem to be very strange for me. I do not have more then one task of the program. I have several opened pictures in own windows (not tabbed) in one program.
I purchased PSP 5 and uninstalled PSP 4. After installation, I am unable to see any image previews in manage, adjust or edit mode. I have installed the service pack updates with no change in this absent function. Neither the main window nor the organizer palette will display any jpg image previews. I CAN go manually to a specific file and open the image and edit it at will, but I cannot see any previews of any images in the main or organizer palette. how to get the program to display image previews. I never had this problem before in any of the previous PSP versions. I have also uninstalled, rebooted and reinstalled the program to no avail.
View 2 Replies View RelatedI can not figure out how to maintain the original file size of my photos when I open them in Paintshop For example, the original file might be 3.78 MB but once it opens in Paintshop it is only 706 KB. Do I need to change settings somewhere?
View 1 Replies View RelatedI have two photos, shooted probably the same day, by the same photograph in the same place !But the pose is a bit different.
first one is in high resolution and in black & white nuance. second one is a small resolution and in full colors. I wish re-color the black&white photo using exactly the same nuance from the colored one.
can i "copy" all the colors from the color-one to the b&w one ?
here are the photos :
the black and white to recolor [URL].......
the source color to use
02/06/13 - This has been fixed in the latest update (15.2.0.12)
In no apparent pattern, MAP mode displays completely incorrect locations for my photos.
The same ones are mapped properly by Nikon View (attachment snap097).
One example is these coordinates:
Latitude:N 39d 12m 58.86s
Longitude:W 76d 31m 21.82s
Altitude:182.00m
Altitude Reference:Sea level
Which is right near the Frances Scott Key Bridge in Maryland, USA.
PSP displays it as somewhere off the west coast of Africa (attachment snap096)
For some strange reason when I open a image and click on my text tool, my image goes into vector mode even when I have create mode set for floating or selection.
I had previously done work with vectoring and perhaps I set something that in now locked. I did reset all preferences, but am still having this problem. I don't have this problem in X3.
Ive just got Paintshop Photo Pro X3 Ultimate . Where i can find the Do-More button? Ive clicked on the cogged wheel (top left) where i thought it would be but its not there!
View 10 Replies View RelatedIn X5 (not in X4) when double-clicking on a thumbnail in the Organizer pallet, the BLACK control panel at the bottom appears, but the image is either Not There, or the entire screen is a Scrambled Mess! Sometimes (like in the morning after boot-up) it's ok, but other times (like in the evening) there is dysfunction and corruption. I'm wondering if X5 has a memory leak or problem? as I got a Blue Screen last night.
View 5 Replies View RelatedUsually I only use Edit Mode in X4.Recently I have been exploring Manage Mode and now decided to try Adjust Mode.I have found that everytime I leave Adjust Mode to go to Edit Mode or Manage ModeI get an error "Encountered an improper argument".
View 14 Replies View RelatedI use PSP X2 ultimate. I cannot find the palette mode organizer. I am having to use the document organizer which I do not like as well. I have tried the "View" tab and I have the organizer on and I have also switched to "Palette Organizer" but the only one that works is the "Document Organizer" I tried the Palette tab in the upper right corner and have it detonated to organizer and that doesn't work either. is my palette organizer gone?
View 3 Replies View RelatedIs there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies View RelatedI need to assign the same creation date to several pictures. On the modify file format (batch process) window there is the possibility to include date but I cannot find a method to modify the date only.
View 2 Replies View RelatedWhen I select "View/Full Screen Preview" and zoom into the image I now get scroll bars on the window - is there a way to avoid having these scroll bars showing up?
(PSP X4 14.2.0.1)
When working on more than one image I sometimes (accidentally) end up with a selected (loaded) image filling the edit area on screen and then I cannot 'see' (and select) the other images I have loaded. This makes me have to resort to exiting Paint Shop Pro and load the images again.
How can I 'see' and select other loaded images when this happens.
I head over to the icon in the top-right corner, "Corel guide". Then I go to the tab "Do more".From here I can download frames, patterns, preset shapes etc. However, I cannot find the downloaded content after installing. I have restarted PSP afterwards, but to no avail. I would try to uninstall and reinstall the packages, but I can't find a way how to do it.
I am using Windows 8 64bit, and the latest update for PSPx5.
Halfway installing PSP Prox4 from my disc or via the web, error message comes up: "The system can not find the device specified" and "Your system has not been modified".I have the latest drivers and DirectX installed.
View 2 Replies View RelatedWhere can I find a preset shape of a ogee curve. It's sort of a slanted S. I've attached an image of one. Lacking a shape, how to draw one using PSP X5. I used autocad and converted the DWG to a JPG file.
View 5 Replies View Related