Paint Shop Pro :: DetectLanguage() Failure Exiting
Nov 28, 2010
I purchased PSP X3 yesterday and, after updating and playing around with it with no problems, when I double-clicked a video in the Organizer PSP tried to install additional stuff but failed because the PSP msi (that is momentarily decompressed during installation) was no longer in the TEMP folder.
Since I was installing it on my laptop too anyway, I "captured" the contents of the "Corel PaintShop Photo Pro X31.5.1.001" folder (in the laptop TEMP) during installation to "feed" to my copy of the desktop next time it asked to install additional stuff.
So, next time PSP asked to install something else during execution, I pointed it to the captured folder and it successfully completed.
The problem is, after this, whenever I try to run PSP I get a dialog stating Select allDetectLanguage() Failure. Exiting.and it just exits. If I re-install it becomes ok again, but I again don't have whatever feature it is trying to install halfway.
Just came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
I installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
if is possible to create the paint drips in the attached design. I really want to learn how to create urban designs, is corel paint shop x3 suitable for that?
I want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
I'm using PS 7.0 and I'm pretty new to it. I'm having trouble exiting some commands when I am in the middle of them and decide not to use it. The Esc key works on some commands, right-clicking and then 'deselecting' works on some commands.
Upon exiting (shutting down) Lightroom 5, we're given a choice to backup the catalog. Is there a way to manually backup it up (without exiting Lightroom 5?
Every time I open an image with my PS extenden edition CS6 the image is not completely shown, I have to or duplicate the layer (backgroud layer)or remove it out of background only than the image is completely displayed. see example
the problem is similar with files in RAW format (NIKON x.nef) see
I already reinstalled PS but dit not solve. Looking for updates on the product, no missing updates (it looks like I have the latest available version.
I have a problem since I upgraded to CS6 for MAC. All the rest of the Design Premium software works fine, but adobe Illustrator seems to have a problem when exiting the app. Always hangs and never closes down so I have to use the Force Quit option of the OS. And it happens ALWAYS.
I am trying to figure out a way to exit a activated viewport that I am in. I am zoomed in on a area in the activated viewport. Well sometimes I forget to lock the viewport before I zoom in. So then I cant zoom back out and deactivate the viewport.
using CS2 on Windows XP. sometimes when i apply a filter, when i exit the filter dialogue - either OK or cancel - when i return to the picture, none of the tools work. space won't bring up the hand etc, and clciking on the Layer pallette, picture, anything, doesn't fix it. i manage to get stuff back by pressing every key in sight and swearing venomously at the machine,
When I close and save my block from the block editor, AutoCAD send me to 0,0. I then have to zoom extents and then zoom back to where I was working from.
I recently discovered that my AutoCAD would become slow, and selection very choppy, after exiting the block editor. Running a purge, audit or regenall does not solve the problem. I have to quit the program and restart. I've also noticed that this has been happening since 2007. It is not my computer, as I am running Windows 7 x64, with AutoCAD 64 bit.
I have developed a C# winforms app with RealDWG SDK. When I close my form I get the "App has stopped working" error below. I've added in some Dispose methods to see if that was the issue, but I still get the error.
I added a dispose method to my HostApplication class and I called my Winform dispose method. I thought that the error was caused by unfinished RealDWG business at the Form Closing event.I am using RealDWG 2013, Visual Studio 2010 SP1, Windows 7 64-bit. I also have AutoCAD 2012 and 2013 installed.
I know that AutoCAD and RealDWG both use acdb19.dll. My app contains 6 classes with around 1000 lines of code on each class, so to paste in my code would be impossible. Here is my code structure.
I start by implementing a HostApplicationService Class (MyHost.cs)
Then I call my Windows Form. (MainForm.cs)
From my form I collect object data from a SqlDatabase.
Once the data is acquired, I send the data to a Class that handles my AutoCAD classes. (AutoCAD.cs)
In this class I create my RealDWG Database.
Next I pass the database to various IDisposable classes that perform AutoCAD actions.
trying to mask a certain area of a face with another picture, so I use the quick mask tool to paint in the area, but when I exit it and enter standard mode, there is nothing selected. It does however act as if there is a selection, because the other layer only is added to that section.
Also, I don't know if this is related to the other problem, but when I move another image into the original one to create two layers, then select the overlay blending option, I am happy with how it looks. However, after adding the layer mask, the other layer is really pale around the masked area.
I'm drawing a blank here...anyway, I just got a new laptop (mac), and am loving it. I've gone and put XDP6 into fullscreen mode (by mistake) and can't figure out how to get out of it.
Of course I don't have a keypad, and I've not figured out how to customize the shortcut away from numpad 8.
I open files from many different customers in 'vanilla' Autocad 2012, upon exiting I occasionally get an exclamation mark inside of a triangle that appears on the screen by itself after the program closes...No text associated with the close just an exclamation mark inside of a triangle with an 'OK' to dismiss....Does not appear to be file specific, does not happen after any specific input either...Is there perhaps a log I can enable and/or interrogate to see what is causing this warning?
I do tech-support work in a school district that is part of the Project Lead the Way program. As part of this program, we have 2 full labs of machines (25+ each) that are licensed for using Inventor 2012. Each year, this program supplies an updated version of Inventor, so each year I have to make a new Ghost image for those labs and apply it. All the machines are identical, and I image them with the same Ghost image file. This year, I'm having some major difficulty as follows:
On seemingly random machines with seemingly random student-level access accounts, the Inventor splash screen will come up when the kids launch the program…and then it will just immediately dump them back to the desktop with no error message whatsoever. At first I thought it was a rights issue, but on some machines it does the same thing when I log in with my administrator-level account.
These machines were imaged with Ghost, with Inventor 2012 installed, then activated on standalone licenses when the kids log in the first time (at least in theory). The machines are running Windows XP SP3, on an AD2008 domain. Sometimes you can log into a machine with a different user account where a kid has had this problem, and Inventor will open right up. That would seem to indicate that it's an account/permissions issue, but if you then take that kid and move him to a different (identical) PC in the lab, he'll be able to open Inventor just fine.
I've spent a good 2-3 hours Googling this one, digging into Autodesk's knowledge base and just looking through different forums, but I've had no luck isolating any factor that might cause this behavior so far. I even went so far as to do a full uninstall using the Autodesk uninstall utility on one affected machine. When I reinstalled from the disc, the behavior persisted. I also tried downloading Service Pack 1 for the software, which apparently just came out on August 31st. Installing the Service Pack didn't fix the issue either. I see nothing suspicious in the system logs that point out an Autodesk-related error.
LR 4 seems to consume and continue consuming lots of memory that is not released upon exiting. This condition occurs whether or not anything is being done in LR. Running LR4.1, Win 7, i7 processor w/ 12 GB ram THis did not occur in LR3.
I have some Tif files and jpeg files that are 600dpi and 400dpi. I scanned these images with my Canon CanoScan LiDE 700F scanner. Can i use my version of PSPP X3 Ultimate to change the dpi value? Is this stuck? I wanted to be able to get the 600 and 400 dpi image files (I have some 300dpi's too) down to the 100-250 range if I needed to. I see there are different export options and compression in PSPPX3Ultimate, but I'm not sure if this will do what I want.
I want to export as Tif and Jpeg again.
Are there any good third party photo and or video editors that I can batch edit this with? It's ok to mention pay programs and I'd prefer good quality freeware if there is such a thing. I am sure that my Corel program can do the trick though. I just don't know how and don't want to rescan multiple dpi's every single time. I only need the archives and then get the smaller dpi when needed.
I was using a trial version of paint shop pro x5 and still had 11 days left of my trial when it suddenly stopped working. When I click on the icon to start paint shop pro it starts up and then freezes every time when it is loading in the spot that says "initializing color swatches".
I haven't changed anything on my computer- it just suddenly stopped working. I uninstalled it and tried reinstalling it, I also tried restoring it.
