Paint Shop Pro :: Error / Detect Language0 Failure Exiting
May 3, 2013I installed Paint shop pro X2 on windows 7. I get an error message "detect language0 failure exiting".
View 4 Replies
ADVERTISEMENT
Paint Shop Pro :: DetectLanguage() Failure Exiting
Nov 28, 2010I purchased PSP X3 yesterday and, after updating and playing around with it with no problems, when I double-clicked a video in the Organizer PSP tried to install additional stuff but failed because the PSP msi (that is momentarily decompressed during installation) was no longer in the TEMP folder.
Since I was installing it on my laptop too anyway, I "captured" the contents of the "Corel PaintShop Photo Pro X31.5.1.001" folder (in the laptop TEMP) during installation to "feed" to my copy of the desktop next time it asked to install additional stuff.
So, next time PSP asked to install something else during execution, I pointed it to the captured folder and it successfully completed.
The problem is, after this, whenever I try to run PSP I get a dialog stating Select allDetectLanguage() Failure. Exiting.and it just exits. If I re-install it becomes ok again, but I again don't have whatever feature it is trying to install halfway.
Paint Shop Pro :: Can't Open X3 / DetectLanguage() Failure - Exiting
Jul 5, 2011I just tried to open PSP X3 and got the following error message:
DetectLanguage() Failure. Exiting
Paint Shop Pro :: Exiting Out Of Tools
Nov 1, 2013How do we exit out of the tools (such as the background eraser) when finished using it? It stays on the screen until the item is saved.
View 1 Replies View RelatedPaint Shop Pro :: Install Error - Getting 1935 Error Message
Sep 3, 2011I have a new box version of PantShop Photo Pro X3. Using the CD to install, I am getting a 1935 error message.
View 8 Replies View RelatedAutoCAD .NET :: APPCRASH Error When Exiting RealDWG WinForms App
May 24, 2013I have developed a C# winforms app with RealDWG SDK. When I close my form I get the "App has stopped working" error below. I've added in some Dispose methods to see if that was the issue, but I still get the error.
I added a dispose method to my HostApplication class and I called my Winform dispose method. I thought that the error was caused by unfinished RealDWG business at the Form Closing event.I am using RealDWG 2013, Visual Studio 2010 SP1, Windows 7 64-bit. I also have AutoCAD 2012 and 2013 installed.
I know that AutoCAD and RealDWG both use acdb19.dll. My app contains 6 classes with around 1000 lines of code on each class, so to paste in my code would be impossible. Here is my code structure.
I start by implementing a HostApplicationService Class (MyHost.cs)
Then I call my Windows Form. (MainForm.cs)
From my form I collect object data from a SqlDatabase.
Once the data is acquired, I send the data to a Class that handles my AutoCAD classes. (AutoCAD.cs)
In this class I create my RealDWG Database.
Next I pass the database to various IDisposable classes that perform AutoCAD actions.
I.E, CreateTitleBlock() CreateLayers(), DrawShape(); etc..
Everything works great, except when I go to close the app, I get the error. I dispose everything I can think of right before exiting.
I've tried:
this.Close();
Application.Exit();
How to dispose the app or close it cleanly?
Here is the error....
Problem signature:
Problem Event Name: APPCRASH
Application Name: LongBayRD.exe
Application Version: 1.0.0.0
[Code] .....
Paint Shop Pro :: Error When Trying To Scan A Document
Jun 29, 2011I'm trying to scan a picture using a LEXMARK Platinum Pro905 all-in-one printer with PSP X3 (v. 13.2.1.20). Lexmarx drivers are the latest available.
Please note I'm using a French version of PSP so I'll try to translate the titles, menus and messages in English. I'm going in File > Import > From a scanner or a camera (3rd option)
A pop-up windows is opening with settings for scanning. I'm able to modify every option if I want to. If I click on "Preview" (with a document in the scanner), I'm getting a preview of the document. Using the preview, I can select the area of the document I want to scan. So far so good.
When I click on the "Scan" button, the pop-up with the scan setting is disappearing (which is probably normal) but a pop-up error message is displayed right away :
The French says "Une erreur s'est produite lors de la lecture du fichier".
In English, it would probably translate by "An error occurred while reading the file". The only choice I have is to click "Ok".
I also tried with another scanner (HP Scanjet Q4010) with same result. Both (Lexmark + HP) are using an USB connection. In the past (few months ago), I was able to scan a document using this method with my HP scanner and PSP X2.
Paint Shop Pro :: X3 (Not Responding) Error Message
May 29, 2011I installed PSP X3 trial version to see if I actually wanted to buy it, but after installing it, I keep getting Not Responding when I try to open the program.I am running out of time on my trial time.
PS: I have the same problem with XI, so I reverted back to Jasc PSP9.
Paint Shop Pro :: X3 Has Stopped Working - Error
Nov 29, 2011repeat error each and every time I use any adjustment on graphics, photos or anything I am working on with PSP X3. Am including a screen shot, edited down to the forum specifics, and I had to edit the screen capture with PSP X2 since to reload PSP X3 will now require my restarting my computer.
I have used Paint Shop Pro since it's very first incarnation as a tiny program courtesy of the folks with Jasc, so this is not my first time using the product, just the absolute worst experience doing so.
No matter what the image, file type, or set-up, when I try to make adjustments (even if I make sure to stop and make double sure they are finished processing), eventually the program locks up and I get the error shown and stated.
Paint Shop Pro :: Getting Error When Try To Save A Picture?
Sep 10, 2012It's been a few days now that when I try to save a picture (either with "save", "Save as", or "save copy"), I get the following message popping up:
"because of the limitations of the specified file format (and possibly the save options you've selected), the saved file will be limited to a merged image. Would you like to continue?"
I have hit ok to that and the software would save the picture, but when I checked the size of each picture I noticed a dramatic drop in size (from 6.5MB to roughly 1.3MB). Just for the record, the editing I did to these pictures was minimal, just a little rotation and a removal of maybe 2mm from each size.
First of all, is it normal to get this message?
And then, is such a drop in size normal?
it's pictures in JPEG taken from the camera and saved as JPEG.
Paint Shop Pro :: Display Web Works Error
Jul 20, 2010I cannot seem to get the Help menu item to work at all. Every time I select Help -> Help Topics... I get a dialog box with the following error message: Web Works Help display fail! I've reinstalled PSP twice. And I downloaded the latest update.
View 13 Replies View RelatedPaint Shop Pro :: Getting Authenticity Cannot Be Verified Error
Mar 5, 2013I purchased PSP X4 Ultimate, a little over a year ago, and recently purchased a new computer. (I had purchased the software through the corel.com website digital download, so I downloaded the files directly from their site.) After installing it on my new computer I started getting the Authenticity can not be Verified Error.
View 3 Replies View RelatedPaint Shop Pro :: Error Saving In JPG Format
Dec 19, 2011I made some changes to a photo and when I went to save the changed photo(save as) in JPG format I get an error writing file to drive, no explanation and it wiped out my original photo on the drive.
View 2 Replies View RelatedPaint Shop Pro :: X4 Full Screen Error
Jan 29, 2012Image with resolution larger than monitor size, view in PSP set to 1:1...Ctrl+Shft+A for full screen view.
PSP switches to full-screen with move (hand) tool present for moving around the image. However, when the move tool is used it behaves like the Esc key and defaults back to preview view within PSP.
Paint Shop Pro :: X3 Won't Respond On Loading / No Error Msg
Jul 10, 2012My PSP X3 locked up and I had to use the Task Manager to close it due to "not responding." This has repeated each time I have tried to load the program, including trying the suggestion of pressing "Shift" and trying to launch the program on a reset. There's no error message, it doesn't get that far. The welcome screen loads, shows the program is updating the cache, etc. but then it goes to no response, no error message, just 100% locked up. Have to use the Task Manage every single time to get it to close.
Right before this happened yesterday, I also experienced difficulty copy and pasting one image or selection into another. No paste commands would appear. I tried doing the "clear" selection as posted online, but no real answer on that either.
short of uninstalling and going through all that crap again. I'd buy the latest version, but since I've had no end of problems with this version I am hesitant to move forward if there are more bugs.
Paint Shop Pro :: X3 Won't Start Up And Induces Old WP Error Message
Jun 21, 2011I cannot get PaintShop Photo Pro X3 NL to start up anymore. Windows Task Manager shows PSP to have started up - as a service only. In the meanwhile, I do get this error message:
[Webbrowser:]
["Cannot find ...:/Users/Kanis/AppData/Roaming//Corel/Messages/540229901_907002/EN/MessageCache...
Check path of the internet address."]
(I'm running my PC in Dutch; so I translated it as correctly as possible).
This message appears from the very instant that I installed Corel WordPerfect X5 on my system, i.e. February 8, 2011. Then I uninstalled WP X5 completely. However, the above message keeps appearing, whenever I try to start Corel PaintShop Photo Project Creator or PSP X3.
In order to keep on going, I installed PSP X3 on a virtual machine on this PC (O/S: Windows XP 32 bits SP3 under VMware Workstation 7.1.4 ( under host W7 Ultimate 64 NL)). It works fine from the beginning, but this is not meant to be. Therefore, on June 6, I tried a fresh reinstall on PSP X3 on the main operating system (W7 Ultimate 64 NL). The problem persisted, as before. I then uninstalled ALL Corel applications from that system, went through the entire register and deleted all traces of Corel, PSP X3 and WP X5 applications. Expelled also all traces of PSI-Service related items (also from the register). Then I made a fresh reinstall of PSP X3, and it worked. Eureka ? Until this very morning. Same old story started all over again. So obviously I have not found the root of the problem. It must have been masked for some time. What is the source of the error message? And how come it causes PSP X3 to start as a service only, and not continue. Note: note even the start-up screen of PSP X3 does show up.
Paint Shop Pro :: Selecting Several Images Yields An Error
May 17, 2013I don't know if it is a bug, or something to do with Windows7 but it has been bugging me for quite a while.
On my old computer (which ran Windows XP), i could choose to open several images in PSP (all versions i had at the time) and the number of selected files didn`t seem to matter. Now, on my new computer (since a few years), i run with Windows7 and i find that if i select more than 4 files to open at once (usually jpg or png) i get an error message asking me to "select a valid file". If i deselect enough files to reach 4, it opens them fine.
It is not a big issue, although it might get a bit annoying if i have 20 small files to open at once, as i have to do it in groups of 4 at the time.
Paint Shop Pro :: Get Error In X3 When Try To Open Images Created In X4?
Oct 9, 2011The PSP X4 trial I was using expired yesterday. Today when I try opening .pspimage files in X3 that I originally created in X4, I get an error message that says they are not valid Paint Shop Pro image files.
View 14 Replies View RelatedPaint Shop Pro :: Error Installing Creative Content And KPT
Dec 10, 2013I installed PSP x6 ultimate using the install 32 and 64 bit versions. I tried to install the kpt and creative content and get the following message-
"setupnewsetup.cpp(143)
PAPP:
PVENDOR:
PGUID:
$15.0.0.498
@windows vista service pack 1 (7601)
IE version:9.11.9600.16428"
I also get the same error message using the 2nd dvd to install "perfectly clear" and "ultimate creative content".
I am running windows 7 pro and don't know why I am getting the error messages. Could this be because they do not run on the 64bit versions? If so when asked to install both versions would they run. There is no program start application for the 32 bit version even if you select install both.
Paint Shop Pro :: An Error Has Occurred While Trying To Read From The File
Jun 17, 2012Just upgraded from X3 to X4, software initialy worked fine, then I installed the KPT add in and now I get the following error message when attempting to view any pictures...An error has occureed while trying to read from the file.
View 1 Replies View RelatedPaint Shop Pro :: X4 Error Has Occurred While Trying To Read From File
Sep 29, 2011I have installed my PSP X4 and from what i see it looks great, faster loading, but every time i click on a jpg i get the error message "an error has occurred while trying to read from the file"..i have looked in preferences and found nothing, i have reset it, and also tried ctr F8, but still cant get my jpgs to show to use them,
i have used PSP since about v5 and never had a problem like this before
Paint Shop Pro :: Error / Reference To Date / Time Being Incorrect
Aug 31, 2011I am creating photo scenery for Flight Simulator X - my source files are large bmp's. From each of these I create a greyscale file which I Save As a tif file. However, when I recompile the bmp and tif together, I get error messages. Most common is a reference to Date/Time being incorrect.
If I load the tif file in GIMP, it reports "Incorrect Count for field DateTime (21, expecting 20); tag trimmed" - If I then save the tif in Gimp, it recompiles without errors.
Paint Shop Pro :: X4 Installation Error / System Can't Find Device Specified
Mar 13, 2012Halfway installing PSP Prox4 from my disc or via the web, error message comes up: "The system can not find the device specified" and "Your system has not been modified".I have the latest drivers and DirectX installed.
View 2 Replies View RelatedPaint Shop Pro :: X4 Installation Error / Change Destination Folder
Apr 25, 2012I just purchased Corel PaintShop Pro x4 today.At the beginning of installation, a box pops up and says: "The feature you are trying to use is on a netwok resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package "vcredist.msi" in the box below."
Nothing works when I change the destination folder, and when I finally click "cancel" another box pops up saying: "Error 1714. The older version of Microsoft Visual C++ 2005 Reditributable cannot be removed. Contact your technical support group."
Paint Shop Pro :: XI Error Messages - Application Failed To Initialize Properly
Apr 25, 2013I just recently started having problems with my PSP Photo XI program on my laptop. The other day it would start up and run normally, but the next day when I went to run the program, it wouldn't start. My computer would freeze up and show this error message: "The application failed to initialize properly (0xc0000006). Click OK to terminate the applicaion."
I tried turning off my computer and running the program again, but the same thing came up. I tried to run the repair program on it, nothing. I even tried to uninstall PSP XI to no avail as I got a different error message: "Internal Error 2328 C:Program FilesCorelCorel Paint Shop Pro XICoreErrorCodesRC.dll"
I really don't know what to do, short of just completely resetting my laptop back to factory settings and starting fresh. But even then I don't know if that would fix the problem.
I wish I knew why the program decided to just stop working one day, as I haven't downloaded anything and my anti-virus is up to date.My computer is a Dell XPS M1710, and it runs Windows XP SP3.
Photoshop :: AMT Subsystem Failure Error:1
Apr 11, 2009I have found a problem with CS4. After reinstal it doesn´t run and a window with AMT subsystem failure open. I tried remove it and reinstal it. Doesnt work and de instalation program show problems.
View 1 Replies View RelatedAfter Effects :: Error - Internal Verification Failure?
Dec 1, 2013I bought Adobe CC 5 days ago and everything worked fine. When i continued to work on a project i started 3 days ago AE suddenly crashed and I got this error:
After Effects Error: internal verification failure! {Plugin ID is invalid}
I don't know why this happened but now i can't open any projects any more and if i start a new one and create a new comp i get the same message and after effects crashes again. In my last project I was mainly using the keylight and liquify plugin and a bunch of masks...
System Specs:
Win 7 Ultimate 64bit
16gb ram
cpu: q9550 @3.99ghz
gpu: gtx770
60gb ssd with os and ae + 4tb hdd (1tb+1tb+2tb)
Paint.NET :: Edge Detect When Recolouring From Black And White
Nov 11, 2012I have some black and white photos from my wedding and I want to add some colour to them. It looks like it will be too much effort to recolour the whole photo so I might settle for just colouring the waistcoats for a splash effect.
I have read lots of tutorials for Paint.NET and for GIMP [URL] Essentially I do the following:
Add a new layer
Use lasso to select the waistcoat
Use bucket fill with the purple colour
Select multiply for the layer.
This gives me the result I am looking for, but only in the region that I have selected.
Not surprising really, but something that I can't get right and that seems to be skipped over in all the tutorials is: how do I select the area correctly?
Unless I go down to a really high zoom and spend ages with the selection, I end up either not selecting everything or I end up with leakage into other parts of the clothes.
This tutorial [URL] for a paid for product seems to let you just roughly choose your selection then it uses some algorithm for edge detection to make the correct selection.
Is there anything in Paint.Net to choose the selection like this? I have tried the magic wand, but the since the picture is greyscale, it chooses random selections all over the image instead of just the waistcoat.
Photoshop :: CS5 - Invalid Document Error After Power Failure
Feb 7, 2013I've been designing for 3 days. A very important design but power cut in the apartment. I tried to recover the file. I've failed.
Should I save a picture? I look on the picture and can draw. I using Adobe Photoshop CS5.
After Effects :: Get The Error Message - Cinerender Connection Failure?
Jul 17, 2013When using this plugin I get the error message. Cinerender connection failure. and all i get is a black screen ...
View 4 Replies View RelatedCorelDRAW X6 :: Optimistic Error Message Accompanies Failure To Import PDF Into CD
Sep 12, 2013I have been having some PDF problems today. Well, one has PDF problems nearly every day, but this one's different. Attempts to import/drag and drop a PDF file into CD are accompanied by this optimistic sounding non-error message:
I feel like I imported the same file yesterday no problem, but can't be sure.
As an attempt to fix this I have removed most other PDF related utilities, removed and reinstalled both CD and ghostscript, but no luck.
How to get the same result with this file: [URL] ......