Is it possible to turn an image a little bit, not rotate or invert, just turn it maybe 15 degrees? A friend of my daughter's did this for me originally and I want to duplicate it. I've attached an example.
View 4 Replies
I haven't found a way to turn a color photo into a Black & White outline drawing in Corel PhotoPaint X5.
View 11 Replies View RelatedHow to turn a photo into a silhouette (I think that's what it's called). How to go about doing it?
There's two styles I'm trying to do. One is all one color, and the other is two colors kind of highlighting shady parts. Here are the two examples:
[URL]
How can I do a normal 2d photo like a painting as in the link.
View 7 Replies View RelatedIn Photo-Paint X5, there is an option that allows you to turn off the pixel grid. It's located under Tools -> Options -> Document -> Grid -> Pixel Grid. If I uncheck the "Show pixel grid at 800% and higher zoom", then the pixel grid is turned off as expected. However, the next time I open another document, the pixel grid gets turned right back on. How do I make it so the pixel grid is always off? I've tried making it fully transparent, but the transparency resets each time I open a new image as well.
View 14 Replies View RelatedI am doing a lot of saving new files over old ones. I am sick of the warning message that pops up having a default answer of 'NO' when I go to replace the files. Is there a way to change the default to 'YES' , or get rid of the message altogether?
View 1 Replies View RelatedI'm trying to rotate a small object in Paint. When I use the rotate toolbar to enter the angle I need, the object rotates just like I want. Then I hit the apply button and some pretty heavy handed anti-aliasing is applied and the object is essentially destroyed. I've been using Paint for quite a long time so I figured there must be an option to turn this off. I can't find one. I even added the anti-aliasing button to the rotate toolbar and turned it off but that doesn't make any difference.
Essentially, what I want when I rotate an object is the chunky, pixelated preview, not the final anti-aliased so much you can't tell what it even is anymore final product.
At this point, I'm going to have to resort to rotating the object and taking a screenshot of the preview and using that instead of the mess that the final result is.
I use inventor 2013. Whenever I start a new sketch and select the top plane, the camera changes so I look at the top plane but also rotates 180degrees. I really hate that the camera rotates 180 degrees because it causes me to always see the drawing upside down (and then change the camera... every time...)
Is there a way to disallow inventor to cause this treason?
How do I get the export parcel ananlysis to show degrees minutes and seconds instead of the default decimal degreees. My direction settings are set to DMS, but I can't see where to change arc deltas...
(running C3D 2012 sp4, Win7 64bit, 8GB)
Is there a way to get some straight edges if an image rotated a few degrees?
View 13 Replies View Relatedwhy do some of the slide come out sideways when i try to make a dvd?
View 3 Replies View RelatedI have a post that can only move up and down and I want to be able to drive an angled wedge sideways under it and back again, such that the post is progressively lifted by the wedge as it moves further under the post and then goes down again. How do I link this? I tried creating a path that coincides with the angle of the wedge and linking the post to that with it set to only inherit movement on the vertical, but that doesn't work. I will also need to do this with a wedge that has a wavy leading edge so that the movement of the post up and down is not linear, but follows the shape of the wave.
Perhaps another analogy would be to have a car drive over a hilly terrain, but instead of the car moving, the terrain is moving sideways under the car, which stays in the same position but moves up and down with the terrain (and the car's orientation is always horizontal (i.e. doesn't pitch its nose up and down).
How can I rotate my video which displays sideways to vertical in PSE 7?It's a waterfall, I filmed it vertically, but it displays horizontally. Full Edit doesn't work on film clips and the rotate option is greyed out.
View 1 Replies View RelatedI make all of my DVD menus in photoshop. I have been asked to make a small sidways triangle next to my titles in photoshop. Is there a simple way to make a small sidways triangle that will be used as a button on a dvd menu?
View 3 Replies View RelatedI have an assembly with several parts where I use a pattern to duplicate the parts in the height. I cannot use the pattern sideways due to different center distances between the parts. I could get this distance by using several patterns, but I rather not if there is another way.
I have made a code for suppressing the parts in element 2 if the same part is suppressed in element 1.
IfComponent.IsActive("FB-07 midtstykke-001:1")=False ThenComponent.IsActive("FB-07 midtstykke-001:2")=FalseElseComponent.IsActive("FB-07 midtstykke-001:2")=TrueEndIf
which works fine, however, I only want the rule to run if two criteria are true. I`ve tried the following:
If Component.IsActive("FB-02 midtstykke-001:1") = False And No = 2 Then
component.IsActive("FB-07 midtstykke-001:2") = False
Else
Componen.....
End if
But this rule runs even if No = 3, which it shouldn't.
need to make a photo faint, like a background, but even after text is written over it, the photo can still be seen.
View 3 Replies View RelatedI have a photo of a model that I want to turn into a silhouette image. I have tried different things that I could think of, just can't see to get the effect that I am looking for.
View 6 Replies View RelatedHow to turn a color photo to B&W with spot color ... but what I cant find a tutorial on is how to turn a color photo sepia, but also spot color. I have a wedding photos that I think would be a fun shot to play mixing those colors together . I have searched for the info earlier today and wasn't successful .
This is a big learning curve and trying to figure out all the tools and layering process.
How do you turn a photo into a line drawing?
View 6 Replies View RelatedI made an attempt at drawing out what I'm trying to say in MSPaint. At my office we use an HP Designjet 800ps to plot our drawings, most everyone uses AutoCAD 2010-2011 and I use AutoCAD LT 2010. All of our drawings are ANSI C size (17"x22") and we use paper rolls that are 24" wide x 150' long. For some reason our plotter always prints our drawings sideways causing us (read 'me, the assistant') to have to trim the excess off of every single print. Not only is this time consuming but it is a huge waste of paper! If I can get it to rotate we will get 19 MORE plots out of every roll of paper!!!
I was wondering if there is some way to change settings somewhere so that our drawings are printed the correct way, saving me lots of time and saving our company lots of paper? Is it normal to plot this way?
is there any filters to turn a photo into a line drawing?
View 6 Replies View RelatedHow do I turn a photo into a pencil sketch using photoshop elements 12?
View 1 Replies View Relatedremoving a background from a photo.
For example, remove the grass from this photo:
Make it look like this:
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I want to know how to resize a photo without loosing quality....... in the image resize box the is a check box that says maintain file size ......what does that do .
I have tried to resize using it and the file stays the same as the original.
I am creating pages where I add elements and they are all resizing to clip to the page size. Very annoying. Can this be turned off?
View 6 Replies View RelatedWhy did my cursor turn into a zoom tool with a photo sized to Fit; and how can I make it go back to a normal arrow?
It is only happening when the photo is sized to Fit. At other sizes, the cursor is normal.
This just started after I finished using the Adjustment Brush. I had used Cntrl + to zoom a photo while using the Adjustment Brush.
I turned off the split toning, but my photos are still in sepia tones , I use Asus Vivobook S200, Windows 8.1. I think this is weird, because this problem does not happen in Lightroom video tutorials in Youtube
View 3 Replies View RelatedSometimes I take a screenshot from within L/R 3.6 and send it by email. Problem is the image name/date/size info. overlay spoils the image. I've looked all over L/R prefs etc but I can't see how to turn the info. off, assuming it's possible to do so?
I used to be able to import pics from my camera into a specific folder on my hard drive. That was until 2 weeks ago. Now my only choice is to import into the folders below. C. drive - where all my digi camera pics are - is no longer there. How do I get L/R import to recognize my hard drive again.
I am trying to change the background of a photo. Not just change the color but change the color AND make it keep it's original shading, etc. I have some family photos we had made recently and they used a beige color draping for the background. The ones we had made before had a black draping. I was wondering how I could go about using some sort of additive coloring to transform the varying shades of beige to the same varying shades of black.
I have already used the masking tool to separate the background from the rest of the photo.
I have two photos, shooted probably the same day, by the same photograph in the same place !But the pose is a bit different.
first one is in high resolution and in black & white nuance. second one is a small resolution and in full colors. I wish re-color the black&white photo using exactly the same nuance from the colored one.
can i "copy" all the colors from the color-one to the b&w one ?
here are the photos :
the black and white to recolor [URL].......
the source color to use
I want to create bulging eyes in a photo that i have. I would do this in photo paint?
View 10 Replies View Related
