I made this image earlier but the bottom part of the image isn't suppose to be there, I tried using cut on it but it just leaves a white rectangle at the bottom and messes up my image.
Attached Thumbnails
I was just wondering as to whether its possible to keep the checkered base which you get when you remove part of an image or have it transparent to stay in the created image.
I am sure you all know this.
Here is the YouTube background which I have created and wondering if I am able to keep the checkered base or whatever in the image after I have saved it rather than print screening and pasting it back like a jigsaw puzzle.
A friend of mine gave a picture and asked me to clear up a part of it.
What is the best way to do it ? I am not an expert in using image editing tools.
I think that Paint.NET is a good tool to do what I need to do.
I've been messing around in paint.NET for a while and I'm about to be done with a project bigger than it looks, but I have a problem. I wanted to create a kind of intro for my Minecraft Youtube videos and all was going great until I rotated the shovel. The quality took a landslide and I really don't feel like visiting each individual pixel and sharpening it. Is there anything I can do to make the shovel look like it's actually part of the image?
View 1 Replies View Relatedif I cut a part of an image out, and want to replace with another image, is there any way to know the correct size (in pixels) to make it match the deleted image portion?
I tried Properties but it gave me the dimensions for the entire image.
And I have no copy of the deleted portion to check its size because I enlarged it when I placed it originally in the entire image and didn't save it separately.
I've run into Paint.NET a few weeks ago. I think it's a very good choice for beginners (and maybe professionals too) at a graphic field. I've made some cool pictures (with some cool plugins inside Paint.NET or published at the forum) and now I wanna to make my own plugin.
The question is how to move and rotate a specific part of image at source canvas. The rest of the image must be untouched. I consider it's impossible to use Layers -> Rotate/Zoom tool directly (correct me if I'm wrong). So I should use a piece of C# code. I think source code of Rotate/Zoom tool would be very useful too but I couldn't find it.
I am using PSP X4.
I am working with transparent images. An example is the image below. I've added borders so you can see what I'm doing.
As you can see, the background is solid white, but the image itself is primarily white. I want only the background to be transparent.
I've dabbled with the GIF Optimizer feature to make the background transparent, but part of the actual image becomes transparent also, since it contains white.
One thing I tried doing was use the color replacer to change the white background to another color, but in doing so, some of the image itself changes to yellow, despite my trying to avoid that.
Is it possible to configure PSP so that only the background is transparent? If so, what's the most practical method?
I'm looking to take a certain part of an image (a small shape of it) and then apply darkening, progressively, from that small area. That is, the image gets darker and darker as it radiates out from that shape. Like a vignette, but progressively darkening from the point rather than a strait darkness.
Tried playing around with curves and didn't really do this effect.
But I only have (can only afford) the Photo Net free Version 3.3x, 3.5.I have a photo, say 2000 x 1500 px. But it is distorted. It looks like the two people in it have 25-inch legs. So I need to select the bottom half (rectangle select)
- and "stretch" that selection (not the whole image) from 1000 x 1500 px to 1250 x 1500 px!
The revised image with therefore be 2250 x 1500 px.
- but it will no longer be distorted
- and will include all the data in the opriginal photo.
All Serif PhotoPlus does is:-
- stretches the selected rectangle
- but keeps the same 2000 x 1500 dimensions
- simply by cropping off the bottom 200 or so pixels. This is not what I want. instead, whether or not Photo Net Version 3.3x, 3.5 is capable of resizing / changing the dimensions of a selected part of an image, i.e. stretching it along one axis?
It will really get me out of a hole that could never have been envisaged for such a simple, routine photographic requirement.
I wasn't really sure how to put that into a title, but yeah. I'm sure it's pretty easy to figure out, but I just don't really feel like it.. I basically mean, how do you select a part of an image and move it onto another one without it being on top of the other image?
View 1 Replies View RelatedIn my image there is an white sky background, where in front there is an person wearing white shirt.
I want to select a by color part of the sky. So I am using magic wand (match mode "color"). The problem is that it select the white shirt as well.
So, using freehand selection, I selected just the sky. Once I want just a color (not all sky), I am trying to to use magic wand (match mode "color" in mode "replace"). But once already exist a selection, the magic wand isn't available to "replace" (just in other modes - add or remove).
How could I make this selection without selecting the shirt? The intent of my first freehand selection was to protect the magic wand of selecting the shirt...
I realize this will be a ridiculously basic question for most of you since I'm very new to Paint Shop Pro, but I've been trying all sorts of tools today trying to find the most efficient way to do something.
I sell clothing online, and I'm looking for the best way to quickly remove the price from an image of the retail tag. Everything I've tried seems to be tedious, so I don't think I've got the right tool so far. I just want to be able to do what was called a "Smart Erase" in my old Digital Image Pro program -- I simply drew a quick outline around the area to be erased, and then clicked on the erase button, and the price was gone off the tag (it inserted the same background area there).
Whenever I bring up the crop tool I see a dialog box covering part of the image. I never use it. Is there a way to hide or get rid of it?
View 3 Replies View RelatedI have a PNG image with only one layer as a start point. It has a faded map on it.
I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).
Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.
So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).
I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).
And then my problem:
I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).
Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.
Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.
I have attached and image to a surface of a part and when I bring it back to AutoCad I can not see the image.
View 1 Replies View RelatedI have been using gimp now for about 2 months and have just upgraded my OS to Mavericks and upgraded Gimp to 2.8.8.
Upon doing this I seem to have lost the ability to copy/cut an image or part thereof from one open image into another... Example:
I have an image window open with a picture a car and I have an image window open with a race track back ground.
I want to copy the car from image 1 into image 2, but for some reason I cannot do this function anymore. When attempting it, once the item is copies to the clipboard and I then swap to the second image, when I paste as a new layer it pastes the clipboard from that image and not the image from the first window...
I have an icon and it's a circle with the outer areas deleted (transparent). I need to select only the image area (the circle) and copy it so I can add it with a paste as a layer over another image.
View 3 Replies View RelatedIt's probably the best to explain my problem with a picture
The background of the text was transparent (Y'u know, white/gray dotted thingy) but when i copy it, it keeps copies the transparent part with it and... Yeah... How do i copy without the transparent part?
How do you blur something in an image without blurring the whole picture?
View 2 Replies View RelatedIn Photoshop you can erase part of an image with the color white with the paint brush and bring it back with the black brush. I used the erase tool to remove part of an image but then wanted to bring the edges back, but with precision detail, however i don't see a way to un-erase the edges like you can in photoshop. Example I have one shot of a sky and one shot of the mountains. I layer the two images and I erase the sky in the mountain image so the sky image in the layer below comes through. However, the divide between the mountain photo and the sky photo has jagged edges and I want to paint part of the image back in with precision along the rough mountain edges.
View 5 Replies View RelatedImagine you have a picture with some parts (surfaces) in a XXX specific color. How to easily select only all these parts to modify their color?
View 2 Replies View Relatedi'm using my corelphoto paint x3 for a year now and it is working fyn then on one occassion i don't know but while editing an image, i suddenly discovered that my effect tools, paint tools, clone tools wont work or wont make changes on the image i'm editing... i've already checked the menus and settings but still no work..i also tried reinstalling the program but still it's all the same..
View 2 Replies View RelatedI'm having trouble using the paint brushes in photo paint x6. i open a JPEG or bitmap then use a paint brush to paint on the image but there is no paint. do i have to use a mask now? I tried copying a dupe for a second layer to see if that worked but nix. i still have x4 and i do it there. but what's with x6? all the other tools work but the paint brush.
View 14 Replies View RelatedI'm currently trying to use one photo as back ground and then use part of a second photo as a layer over the top of the first pic (as the background). Can't seem to get it to work at all! Hard as the part of the 2nd pic is a lion which needs cutting round.
View 1 Replies View RelatedI have a logo someone else created. When I bring it in to Illustrator (CC) parts of it are red. And inside the red there are white parts. I want the white parts gone... so that the background will show through (i.e., not the red). I have done this in the past by using "Minus Front" in the pathfinder. But it's not working. This is something I converted from a PNG.
View 3 Replies View RelatedIn using the selection tool that encompasses the part of the photo with a selection doted box ,it takes several attempts for it to work. It stops intermediately before i lift my finger off the button ? I am using the newest Paintshop Pro x5 W/Win 7.
View 4 Replies View RelatedI'm not sure if you can do this but if any of you have seen the Itunes Color Effects app, I'm wondering if there is a way to keep color in one part of a photo while making the rest B&W? I know how to make it B&W & I can't get it to work with the paint bucket or anything like that.
View 2 Replies View RelatedI would like to be able to shade certain rooms on a floor plan but still be able to read the text underneath.
Just a pale pastel shade on say the bathroom would be grand.
how to enlarge part of a RAW image
View 6 Replies View RelatedAny method for sharpening only a part of an image not the whole picture with Photoshop CS5?
View 3 Replies View RelatedUsing XP with PS CS4.
I am going to attach an image so that I can illustratate what I am trying to achieve here..
You should see a white hose like object against a gray background. I cannot show the whole image, let's just say that above and below it, it gets complicated, meaning not just a plain gray background and the hose isn't all that straight.
I do have the white part as a path, but what I am looking to do is to thin the white part. I can assume you can't go wrong with the clone tool, but I was wondering if there was something better as I do not have a steady hand with the mouse and I do have a few of these images on hand to edit.
