I have an icon and it's a circle with the outer areas deleted (transparent). I need to select only the image area (the circle) and copy it so I can add it with a paste as a layer over another image.
View 3 Repliesyou could copy the layer from picture 1 to picture 2.
So you coud copy whole "effect-strings" much easier as before.
Is there a chance to implement this feature to P.net?
How do you blur something in an image without blurring the whole picture?
View 2 Replies View RelatedHow do I change a White or Black colored picture or cropped part into a different color? Hue won't work because its color is white and black.
View 4 Replies View RelatedIn Photoshop you can erase part of an image with the color white with the paint brush and bring it back with the black brush. I used the erase tool to remove part of an image but then wanted to bring the edges back, but with precision detail, however i don't see a way to un-erase the edges like you can in photoshop. Example I have one shot of a sky and one shot of the mountains. I layer the two images and I erase the sky in the mountain image so the sky image in the layer below comes through. However, the divide between the mountain photo and the sky photo has jagged edges and I want to paint part of the image back in with precision along the rough mountain edges.
View 5 Replies View RelatedIs that possible to add a glossy layer on the full photo or picture to make them glossy in paint.net.
View 4 Replies View RelatedI am using Photoshop Elements 10. How do I convert a picture to B&W and then erase part of the picture for the color?
View 4 Replies View RelatedI'm just working on a flyer for a party and I like how the picture looks like after clicking on the picture with the magic wand.Now the question if I can save that picture with that looking someway?
I could use the print button, yes but then I lose the quality of the pic.
I am using PSE 11 and need a hint as to how to duplicate the picture layer and then add a layer mask. Still trying to figure this thing out.
View 1 Replies View Relatedthis is my problem:
Pic 1. I have an image I want to use as a background, however the image is not complete. I need a part of pic 2 to fullfill it.
Pic 2. The colors around the object doesn't match the colors of Pic 1.
Normally it would be best to cut the object out. However in this case it wouldn't look nice (the object is mixed out (in color) with the rest of the image). If I cut out something the object won't look "proper".
My question:
How can I blend pic 2 on pic 1, using the original object from pic 2 (as it is), and at the same time blend the colors around it, so that it matches that of pic 1 / or simply remove it somehow?
I have a jpg image that has an area of the image blocked with a white box where you cannot see the pixels beneath it, however in a thumbnail of the picture, in a regular windows folder, the white box is gone and you can see the entire picture and no white box.
I have tried everthing that I can think of in PS, but can't seem to find anyway to remove the white box to see all of the pixels.
I have CS3 on a PC and need to recolour a portion of a picture so that part of the picture is coloured in a Pantone colour and not the red as it is now. I have tried using Hue and Saturation and colour balance, but unable to make just my selection a Pantone colour.
View 4 Replies View RelatedI was wondering how could we resize, like decrease the breadth or length etc. of let's say one person in a picture of two?
let me elaborate my question, let's say there are two people in the pic, one of them is really broad or tall and i just want to resize him/her to be less broad or tall, how can i do that?
there is a brush or something similar that allows you to grab a part of a picture and kinda drag it around. not cut and move it, actually distort it and such.
there is also maybe the same one that allows you just to click and sort of inflate/deflate part of the pic.
i KNOW one of you out there has to know what im talking about!!! it kinda stretches the part of the image so that you can make things look distorted or whatever. almost like if you grabbed your cheeks and pulled!
I want to put a person as a logo in a white background. I have the person in a picture which has other things that I don't need. I only want to extract the person from the picture and being able to resize it and use it as a small logo in a background.
View 2 Replies View RelatedI have got a picture of beautiful woman. And? How to make a part of picture in greyscale? For exemple - arm. I selected this part and clicked on greyscale. And? The whole picture is in greyscale. Wh? I tried make a quickmask but the greyscale mode is not active.
View 4 Replies View RelatedI really looking for a solution how can I change the color of a part of a picture.In my case it's a pharmacy sign (see attachment). I want to change the color of the white Part (snake&scale) into a sort of brown (#bcb29d).The green cross I want to change into red.
I only managed (not even that perfectly) with hue. But I cannot choose exactly the colors I want. I manage with the color/select tool to select the region I want to change but then.I don't know how to move on.
I'm new to photoshop cs2 but i have played with alot of video editor programs so i can catch on quick.
anyway im really into photgraphing cars. i just started photoshop and i found i can really do alot to the cars with this program.
my question is i have a car that is in the sun at an angle and the windows are tinted but the angle you can see in a little.. how can i outline the window and darken it so it looks more tinted?
How do I make part of a picture transparent?
View 2 Replies View RelatedI run MacOS 10.9, Lightroom 5.3 and I print on an Epson R3000.
The first problem I had was that the images was printed on just a small part of the paper and it cut the images. I have attached a picture showing this. I totally reinstalled my computer and now it looks like that problem is gone (for now at least). But now the images are printed but much smaller than the paper I specify. If I specify A3+ I get something close to A4. Borderless printing on 6*4 looks to be working as it should but that's the only I managed to print so far.
I tested printing from Photoshop 5.1 and that worked fine.
I want to use this pic for my phone wallpaper. I tried to enlarge it but the quality drops really bad. It needs to be 960x800. Is it possible to extend the top part of the picture to make it more "square" without cropping the width?
View 1 Replies View RelatedI was wondering if there's a way to apply local changes to a picture by including the part I need to be changed in a square (like when you crop it). Without using the graduated filter.
View 1 Replies View RelatedToday i opened a psd file which 200 layers. Paint.net is very slow then (as all layers are flatten, pdn is missing hierarchical layers), but that is another problem.
I wanted to hide some background layers and "copy merged" a selection.
It took me 10mn to find all the backgrounds layers without this tool.
In photoshop the tool exist as a property of the "move selection" tool. Ie: you must first select the move selection tool, then select "layer" in the properties toolbar.
Any way to get that for v4 ? Will v4 be on github so we can clone and make patches ?
I'm new to Paint shop. Is it possible to clip an adjustment layer or image to just the layer below it like in Photoshop? Or maybe Paint shop calls it something else?
View 14 Replies View RelatedI would like to make a composite image with source images making up the various layers (so I can work my magic on each layer indepent of the others). The problem I have is that not all of the images I'm using are to the right scale. What I want to do is resize those layers that are too big. Here's an example...
Let's say I have 5 pictures that I want to use to make one composite image from. The main background layer will be made from an image that is, say 800x600.
Another picture (let's call this subject 1) is 600x600 and is already at the right scale if I cut out the portion I want to keep and lay it on top of the background layer.
Yet another picture (subject 2) is huge (think 2000x2000). I would like to cut out the portion I would like to use and drop it in as a new layer and then obviously re-size it down to the correct scale. I'd prefer to do this directly in the composite image I'm making on its own layer to ensure I get the size right (and without manipulating the image guess-work style before I cut/paste it in).And so on...
I've found ways to make the canvas bigger (not what I want to do)... but not anything on how to resize the images on individual layers without impacting the other layers. Is there a way to do this?
How can I changed a colored pictkure to black and white and keep a selected part colored (color swap)
View 1 Replies View RelatedCloning from layer to layer continues to be a problem in PP X6. Sometimes it works. Sometimes it does not work. Yes. I know what is happening but I don't like it. I can get around it but I still don't like it. How about in X7, the clone tool include a source and target dialog for the clone tool
View 2 Replies View RelatedHow you can take someone out of a picture and put him into another picture?
View 3 Replies View RelatedHow can I add a layer mask to my picture? I couldn't click on it in the Layers menu, is there something I can do, for that option to be available?
View 1 Replies View RelatedOK I am stuck. I have created a new image. Created a new trasnparent layer and deleted the background. I pasted an exising PNG (with transparency) into the layer. All my tools do not work. I can paint onto the exsiting image but when I try to paint over transparent parts of the layer nothing is shown. There must be some simple setting I dont know about right?
View 5 Replies View RelatedI want to make a simple animation from 3 pictures (gifs saved on my computer). I understand that I have to get these 3 pictures to be layers but I can't work out how to do that. One tutorial referred to Image>convert to editable layer but I don't see this option on my menu (using CS2). I have to admit to not having mastered layers properly yet.
I would be so grateful if someone could give a step by step description of how to import 3 different pictures and somehow get them into one animation. The ability to make simple animations would make an enormous difference to the project I am working on.