I'm currently trying to use one photo as back ground and then use part of a second photo as a layer over the top of the first pic (as the background). Can't seem to get it to work at all! Hard as the part of the 2nd pic is a lion which needs cutting round.
View 1 Replies
I have a PNG image with only one layer as a start point. It has a faded map on it.
I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).
Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.
So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).
I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).
And then my problem:
I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).
Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.
Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.
I was just wondering as to whether its possible to keep the checkered base which you get when you remove part of an image or have it transparent to stay in the created image.
I am sure you all know this.
Here is the YouTube background which I have created and wondering if I am able to keep the checkered base or whatever in the image after I have saved it rather than print screening and pasting it back like a jigsaw puzzle.
I have attached and image to a surface of a part and when I bring it back to AutoCad I can not see the image.
View 1 Replies View RelatedI have been using gimp now for about 2 months and have just upgraded my OS to Mavericks and upgraded Gimp to 2.8.8.
Upon doing this I seem to have lost the ability to copy/cut an image or part thereof from one open image into another... Example:
I have an image window open with a picture a car and I have an image window open with a race track back ground.
I want to copy the car from image 1 into image 2, but for some reason I cannot do this function anymore. When attempting it, once the item is copies to the clipboard and I then swap to the second image, when I paste as a new layer it pastes the clipboard from that image and not the image from the first window...
how to enlarge part of a RAW image
View 6 Replies View RelatedAny method for sharpening only a part of an image not the whole picture with Photoshop CS5?
View 3 Replies View RelatedUsing XP with PS CS4.
I am going to attach an image so that I can illustratate what I am trying to achieve here..
You should see a white hose like object against a gray background. I cannot show the whole image, let's just say that above and below it, it gets complicated, meaning not just a plain gray background and the hose isn't all that straight.
I do have the white part as a path, but what I am looking to do is to thin the white part. I can assume you can't go wrong with the clone tool, but I was wondering if there was something better as I do not have a steady hand with the mouse and I do have a few of these images on hand to edit.
I'll post up the part of the image , within the image there is a Picture frame and im just looking to remove it so that it looks like a clear wall.
Its the picture frame above the guys shoulder, ill post up the full image.
I'm having a hard time figuring out how to deselect part of an image. When I use the magic wand to select the white background it includes part of the thumb nail. How do I deselect the white part of the thumb nail so I don't remove it with the background?
View 6 Replies View RelatedI would first off like to thank you for a wonderful forum and for a chance to ask for assistance directly. It always amazes me to see a group of professionals and enthusiasts willing to offer their immense knowledge and their precious time for nothing in return.
That is why I am particularly grateful for this forum.
Anyway, I am an absolute newbie to Photoshop and pretty much to graphics processing as well, so my question I guess will be an easy one to answer. Code:
i have an image with text on it, and I want to know how to make just a section of an image a link.
View 2 Replies View RelatedI have been shooting several images of architectural interiors and stitching them together and the attached image is the result I get. I would like to be able to distort, or stretch the center of the image up and down without effecting the left and right ends of the image.
View 9 Replies View Relatedfade out part of an image. Say I have a jpeg, and I want to have the last third of the image naturally fade out, how do I do it? I don't want to use the gradient, I want to actually fade out the image.
View 3 Replies View RelatedI have one problem. I'm using transform tool to scale part of image, but it doesn't look good. Maybe I should use liqify tool but I really don't like it. Here is example of how it looks, at the top left corner of this site [URL]....
View 3 Replies View RelatedHow to make an animation on a certain part of a GIF image? Like a man walking but his background wont change just the man is animating on the GIF. I tried the usual transparent on all layers except the background layer but it wont work on GIF.
View 5 Replies View Relatedcurrently using PS5 and recently updated to PS6. In both versions i have an issue with ACR.More often than not, when processing a raw file, if i apply any noise reduction (ie move the luminance amount slider from 0) the zoom stops functioning preventing me zooming in or out. Some times this is acompanied by the image "stuttering" if i move the image around the screen to look at a different part.
When i open an image in ACR and convert to tiff in PS the first time i use the program all is well, but if i then go back to ACR and open another image i often find that the ACR screen comes up minus the actual image. The window which should contain the image shows PS underneath. Im currently using windows 7. I often get an error message when trying to open a raw file stating "not enough RAM". Is the ram (or lack of) responsible for all of these issues?
I have been mocking up an image on Photoshop, the final image basically consists of a variation of placed images. Whenever I zoomed in, one small part of the image wouldn't load properly and instead be pixelated. Usually it would go away once I either zoomed in or out a step further. But now it has just remained there and I have a pixelated strip that won't go away.
I'm not too sure why this may have occurred? This is a small screenshot of the strip:
I have been wondering how do I isolate the main part of the image to be able to cut it? I know I can obviosly lasso it..but is there a shortcut? or an action that could be used?
View 1 Replies View Relatedi want to create one photo in 3 parts for a verical visual effect on a wall. using 3 separarate 8x10 frames, placed slightly apart to create the one image.example: a waterfall in 3 parts, spaced accordingly on a wall.any ideas? i tried the rectanglular marquee to select and print part of the image,but the "print selected area" box is grayed out.
View 2 Replies View Relatedhow to cut out part of an image and completely turn it into something else. So far ive been able to figure out how to outline the image with the pen tool and then select "Vector Mask". Then the background of what i didnt select disappears which is what i want. So then i try to use a gradient to fill in behind what i cut out, and instead the gradient fills in what i cut out. How do i make it fill in behind the cut out instead of inside?
View 2 Replies View RelatedIf you are using the new BW adjustment filter, can you control how much of the cyan goes in one part of the image, and how much goes in another part of the image?
View 7 Replies View RelatedOur products all have a common element that consists of a backlit blue area with black text. In all of our product photography, the blues look different (when looking at the actual products, the blues do match).
I want to go through the library and color match the blues the best I can (to Pantone 306 U). What is the best way to do this?
how to increase the size of a picture without it getting too pixelated to identify what the image is. The problem I am having is I had to take a screenshot of a picture online and I need to identify specific wording on a small item in someones hand. I tried clicking on resize image and unchecked re-sample image but that is not working either.
View 9 Replies View RelatedI've a scanned image with text (jpeg format). I want replace the text and some part of the image.
View 2 Replies View RelatedWith a RGB or CYMK no problem for me to have certain element in the picture distinguishing from the rest. But now I have to do the same building up in duotone (2 PMS colours). It looks like Photoshop doesn't allow to put a black&white layer into a duotone document (it automatically turns into the 2 duotone colours).
So how can i make a duotone image (source = FC) in which a part looks "black and white" (1 colour=black) and a part "lights up" in the second colour (2 colour= yellow)?
- so I know how to make a duotone image, that's not the problem
- i know how to work with layers and masks
(i try to upload the image.. but server seems very busy...)
How is it possible to evaluate the total relative area of the part of a photo image selected by its colour in Photoshop (in % to the whole image)??
View 1 Replies View RelatedI made this image earlier but the bottom part of the image isn't suppose to be there, I tried using cut on it but it just leaves a white rectangle at the bottom and messes up my image.
Attached Thumbnails
I have a logo someone else created. When I bring it in to Illustrator (CC) parts of it are red. And inside the red there are white parts. I want the white parts gone... so that the background will show through (i.e., not the red). I have done this in the past by using "Minus Front" in the pathfinder. But it's not working. This is something I converted from a PNG.
View 3 Replies View RelatedIve copy and pasted into an image and i thought i got it where i wanted so i saved it and exited the program. But then i realised that the image i pasted was a few pixels off. I have been trying to select a portion of the image and move it to where i want it but cant find how. Ive selected the portion and clicked on move then selection but it moves the selection area not the image within it.
View 1 Replies View RelatedA friend of mine gave a picture and asked me to clear up a part of it.
What is the best way to do it ? I am not an expert in using image editing tools.
I think that Paint.NET is a good tool to do what I need to do.
