fade out part of an image. Say I have a jpeg, and I want to have the last third of the image naturally fade out, how do I do it? I don't want to use the gradient, I want to actually fade out the image.
View 3 Replies
how do I have 1 image gradually fade into another? i know how to adjust transparency, but that adjusts the entire image and not just a portion of it (from my limited understanding of the program).
View 4 Replies View RelatedI created a lovely new image for my website using Photoshop CS. It's a very vivid, colorful design. I would like to use it as a background for my business card but it needs to be faded. I've futzed (a real techie term!) with the hue/saturation and the brightness/contrast but can't seem to find a 'washed out'look i'm going after. Any suggestions?
View 4 Replies View RelatedHow can i make an image fade away, not blur , but fade/dim like you put a plastic sheet in front. I tried having it too bright but that did not look right ..........
View 2 Replies View Relatedi need to make his image into a site.. now i got some ?'s
he is using it for wallpapers, he wants the wallpapers part of the main image on its own layer, so that it is translucent then when you go over it, it will go to full color (no tranparency). do i have to do this as a gif and make it a rollover or something, do i need to make it a seperate image?
I need to make an image fade to transparency for a little projet of mine.
I tried to add a mask to my layer with a gradient [blanc to white] in it, in photoshop it gave the result I wanted, but when I save it as a PNG, the transparency is just not working like in photoshop. (Assuming I use it as an image in a website)
I tried to remove the contour thing, and photoshop see's only two colors [000000 and transparency] so when I open it in a browser, there is simply nothing. If I add a white background for exemple, the image will work, but I need the image to be really transparent so it can merge with my web background.
I've made a .psd which fades from white to 100% transparent. I was hoping to export it as a png 24 and put the image over some text in a webpage to make the text look as though it had a fade on it.
The text is automatically updated, thats why i have to do it this way. When I do save for web as png 24 and place it over text in dreamweaver and preview in safari all that happens is the image shows as a black solid image! What can i do?!
I need to take an image and fade the edges of it to white.
I have 2 days to figure this out because I got put in charge of making the program for my wedding. I know computers inside and out but have never used photoshop before.
i have an image that i want to fade make look alot paler - it must be simple?
want it to still be as sharp but alot less prominent as im using it in a background. I know background images are frowned upon but this will look good wen iv taken it down a few shades lighter.
I need to fade the edge of an image to 100% transparency, save as PNG, and then I can put it on another image and it fits naturally.
View 6 Replies View RelatedEach page is just an image file, and the page background is black. So for the image to go into the page seamlessly, the edges have to fade to black. So far I've only been able to do it with specific kinds of pictures that are already black, or have very dark edges, and I just use the burn tool to fade it to pure black so it blends in nicely. If you go to the page, you'll see what I mean. However I'd like to be able to do a similar thing with brighter images, or images where the edges aren't already black/dark. How can I fade bright images to black in a convincing way? When I try using the burn tool, it doesn't bring it all the way to black, and if I use the gradient tool (i.e. from transparent to black or something), it's hard to get it uniform all the way around the image.
View 1 Replies View RelatedI have an image recently turned into a .swf so that it can expand/contract to any browser resolution (http://thevoiceofnow.com). I originally worked in Fireworks, but have access to Photoshop so any help is appreciated.
I'm trying to get the image (.swf) to fade nicely into the background color #960. On some computers it works quite well, on others you can see the line between the two very visibly. Is there anyway to get a better color match between the file and background?
I've been using Photoshop intensely this year for school assignments, and I'm learning to get around very well. The issue I'm currently having is that it want to make a layer mask that fades from the mask to the image behind, from color to transparent to create a smooth transition.
I've attached a sample image of what I'm trying to do. Just note, I used a very round-about method to get this image, but I want to achieve the same effect with a vector mask.
I have a black and white picture with edges, greys, blacks and even the whites that are too precise, aggressive and defined. I want to make a picture taken today look as if it was 50 years old, I want to wear it down and get it to stand out less because I want to put it next to pictures of people in older b&w pictures.
I have an inkling that if only I could wear down the blacks and greys I could get this down.
What I am trying to do is, I have an image. I would like to fade the image edges into the background which is colored black. So in essence, I want the image to meld into the background which is black. How is this done. I tried so many things and I cant seem to get it right.
Every time I get close, to getting it right, my image fades somewhat using the gradient tool and a new opaque white layer but I get white and silver boxes on the edges of my image?
How do i fade the top corners of this image so that the top corners are transparent.
i added a picture of rihanna wearing a t shirt with the corners faded i would like to know how to do this?
how to fade to transparency by myself I am left with a residue problem when saving to a different file format.
I took my square image and pasted as a layer. Behind this is a raster layer flood filled with black (As the image will be going onto a black t-shirt). I used a rounded rectangle selection tool to make a mask somewhere just inside the image borders. I then applied a Gaussian blur to the mask and it faded the edges of the image beautifully. I checked with the black background layer off and again it faded nicely into transparency.
Now my issue is that when I save it as a PNG file (with background set to transparency of course) and try to use it against various coloured backgrounds there seems to be a white glow around the edges where it is meant to fade out.
I have a PNG image with only one layer as a start point. It has a faded map on it.
I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).
Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.
So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).
I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).
And then my problem:
I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).
Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.
Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.
I was just wondering as to whether its possible to keep the checkered base which you get when you remove part of an image or have it transparent to stay in the created image.
I am sure you all know this.
Here is the YouTube background which I have created and wondering if I am able to keep the checkered base or whatever in the image after I have saved it rather than print screening and pasting it back like a jigsaw puzzle.
I have attached and image to a surface of a part and when I bring it back to AutoCad I can not see the image.
View 1 Replies View RelatedI have been using gimp now for about 2 months and have just upgraded my OS to Mavericks and upgraded Gimp to 2.8.8.
Upon doing this I seem to have lost the ability to copy/cut an image or part thereof from one open image into another... Example:
I have an image window open with a picture a car and I have an image window open with a race track back ground.
I want to copy the car from image 1 into image 2, but for some reason I cannot do this function anymore. When attempting it, once the item is copies to the clipboard and I then swap to the second image, when I paste as a new layer it pastes the clipboard from that image and not the image from the first window...
I'm currently trying to use one photo as back ground and then use part of a second photo as a layer over the top of the first pic (as the background). Can't seem to get it to work at all! Hard as the part of the 2nd pic is a lion which needs cutting round.
View 1 Replies View Relatedhow to enlarge part of a RAW image
View 6 Replies View RelatedAny method for sharpening only a part of an image not the whole picture with Photoshop CS5?
View 3 Replies View RelatedUsing XP with PS CS4.
I am going to attach an image so that I can illustratate what I am trying to achieve here..
You should see a white hose like object against a gray background. I cannot show the whole image, let's just say that above and below it, it gets complicated, meaning not just a plain gray background and the hose isn't all that straight.
I do have the white part as a path, but what I am looking to do is to thin the white part. I can assume you can't go wrong with the clone tool, but I was wondering if there was something better as I do not have a steady hand with the mouse and I do have a few of these images on hand to edit.
I'll post up the part of the image , within the image there is a Picture frame and im just looking to remove it so that it looks like a clear wall.
Its the picture frame above the guys shoulder, ill post up the full image.
I'm having a hard time figuring out how to deselect part of an image. When I use the magic wand to select the white background it includes part of the thumb nail. How do I deselect the white part of the thumb nail so I don't remove it with the background?
View 6 Replies View RelatedI would first off like to thank you for a wonderful forum and for a chance to ask for assistance directly. It always amazes me to see a group of professionals and enthusiasts willing to offer their immense knowledge and their precious time for nothing in return.
That is why I am particularly grateful for this forum.
Anyway, I am an absolute newbie to Photoshop and pretty much to graphics processing as well, so my question I guess will be an easy one to answer. Code:
i have an image with text on it, and I want to know how to make just a section of an image a link.
View 2 Replies View RelatedI have been shooting several images of architectural interiors and stitching them together and the attached image is the result I get. I would like to be able to distort, or stretch the center of the image up and down without effecting the left and right ends of the image.
View 9 Replies View RelatedI have one problem. I'm using transform tool to scale part of image, but it doesn't look good. Maybe I should use liqify tool but I really don't like it. Here is example of how it looks, at the top left corner of this site [URL]....
View 3 Replies View Related
