Photoshop :: Fading An Image (.swf File) Into Background
Apr 7, 2005
I have an image recently turned into a .swf so that it can expand/contract to any browser resolution (http://thevoiceofnow.com). I originally worked in Fireworks, but have access to Photoshop so any help is appreciated.
I'm trying to get the image (.swf) to fade nicely into the background color #960. On some computers it works quite well, on others you can see the line between the two very visibly. Is there anyway to get a better color match between the file and background?
View 5 Replies
ADVERTISEMENT
Aug 22, 2004
i have an image that i want to fade make look alot paler - it must be simple?
want it to still be as sharp but alot less prominent as im using it in a background. I know background images are frowned upon but this will look good wen iv taken it down a few shades lighter.
View 3 Replies
View Related
Aug 28, 2008
I'd like to know how to achieve the fade look for backgrounds. I don't want everything to be the same % of transparency.
View 2 Replies
View Related
Mar 10, 2005
I am looking to make a graphic which fades into a single colored backgound.
There will be a picture of mountains and I want those mountains around the edges to fade into my background which will be blue or white.
View 2 Replies
View Related
Nov 23, 2006
how to create this effect?
View 1 Replies
View Related
Oct 17, 2011
I have a picture of a bull rider that i would like to use in one of my next poster designs with the bull rider being the focus of the poster. I would like to use the entire picture as the layout for my poster. My question is..is it possible to fade out the background a bit without fading out the bull rider?
View 3 Replies
View Related
Mar 20, 2005
how do I have 1 image gradually fade into another? i know how to adjust transparency, but that adjusts the entire image and not just a portion of it (from my limited understanding of the program).
View 4 Replies
View Related
Dec 10, 2003
I created a lovely new image for my website using Photoshop CS. It's a very vivid, colorful design. I would like to use it as a background for my business card but it needs to be faded. I've futzed (a real techie term!) with the hue/saturation and the brightness/contrast but can't seem to find a 'washed out'look i'm going after. Any suggestions?
View 4 Replies
View Related
Sep 29, 2005
How can i make an image fade away, not blur , but fade/dim like you put a plastic sheet in front. I tried having it too bright but that did not look right ..........
View 2 Replies
View Related
Mar 22, 2003
i need to make his image into a site.. now i got some ?'s
he is using it for wallpapers, he wants the wallpapers part of the main image on its own layer, so that it is translucent then when you go over it, it will go to full color (no tranparency). do i have to do this as a gif and make it a rollover or something, do i need to make it a seperate image?
View 2 Replies
View Related
Aug 13, 2007
I need to make an image fade to transparency for a little projet of mine.
I tried to add a mask to my layer with a gradient [blanc to white] in it, in photoshop it gave the result I wanted, but when I save it as a PNG, the transparency is just not working like in photoshop. (Assuming I use it as an image in a website)
I tried to remove the contour thing, and photoshop see's only two colors [000000 and transparency] so when I open it in a browser, there is simply nothing. If I add a white background for exemple, the image will work, but I need the image to be really transparent so it can merge with my web background.
View 9 Replies
View Related
Dec 6, 2007
I've made a .psd which fades from white to 100% transparent. I was hoping to export it as a png 24 and put the image over some text in a webpage to make the text look as though it had a fade on it.
The text is automatically updated, thats why i have to do it this way. When I do save for web as png 24 and place it over text in dreamweaver and preview in safari all that happens is the image shows as a black solid image! What can i do?!
View 1 Replies
View Related
Jul 23, 2006
I need to take an image and fade the edges of it to white.
I have 2 days to figure this out because I got put in charge of making the program for my wedding. I know computers inside and out but have never used photoshop before.
View 2 Replies
View Related
Jan 21, 2003
fade out part of an image. Say I have a jpeg, and I want to have the last third of the image naturally fade out, how do I do it? I don't want to use the gradient, I want to actually fade out the image.
View 3 Replies
View Related
Jul 11, 2012
I need to fade the edge of an image to 100% transparency, save as PNG, and then I can put it on another image and it fits naturally.
View 6 Replies
View Related
May 17, 2011
Each page is just an image file, and the page background is black. So for the image to go into the page seamlessly, the edges have to fade to black. So far I've only been able to do it with specific kinds of pictures that are already black, or have very dark edges, and I just use the burn tool to fade it to pure black so it blends in nicely. If you go to the page, you'll see what I mean. However I'd like to be able to do a similar thing with brighter images, or images where the edges aren't already black/dark. How can I fade bright images to black in a convincing way? When I try using the burn tool, it doesn't bring it all the way to black, and if I use the gradient tool (i.e. from transparent to black or something), it's hard to get it uniform all the way around the image.
View 1 Replies
View Related
Apr 11, 2012
If you have a background image file, if you pull it up in photoshop, how many pixels each colored layered is?
View 2 Replies
View Related
Oct 3, 2007
I've been using Photoshop intensely this year for school assignments, and I'm learning to get around very well. The issue I'm currently having is that it want to make a layer mask that fades from the mask to the image behind, from color to transparent to create a smooth transition.
I've attached a sample image of what I'm trying to do. Just note, I used a very round-about method to get this image, but I want to achieve the same effect with a vector mask.
View 1 Replies
View Related
Apr 27, 2012
I have a black and white picture with edges, greys, blacks and even the whites that are too precise, aggressive and defined. I want to make a picture taken today look as if it was 50 years old, I want to wear it down and get it to stand out less because I want to put it next to pictures of people in older b&w pictures.
I have an inkling that if only I could wear down the blacks and greys I could get this down.
View 3 Replies
View Related
Mar 29, 2011
What I am trying to do is, I have an image. I would like to fade the image edges into the background which is colored black. So in essence, I want the image to meld into the background which is black. How is this done. I tried so many things and I cant seem to get it right.
Every time I get close, to getting it right, my image fades somewhat using the gradient tool and a new opaque white layer but I get white and silver boxes on the edges of my image?
View 6 Replies
View Related
Aug 6, 2013
How do i fade the top corners of this image so that the top corners are transparent.
i added a picture of rihanna wearing a t shirt with the corners faded i would like to know how to do this?
View 7 Replies
View Related
May 16, 2012
How do you fade SID files in Civil 3D 2013. Our printer prints them to dark!
View 3 Replies
View Related
Jan 25, 2013
After removing an image from a background, what is the proper procedure ( in order) to "save" the image to "file", for later use?
View 1 Replies
View Related
Jul 3, 2013
I need to get a PNG (or any other image file) with a transparent background off of my layouts. We need them to put some images on our website. I've tried everything...pngout, wmfout, converting, GIMP, inkscape...can't seem to make it work..
View 2 Replies
View Related
Dec 12, 2012
how to fade to transparency by myself I am left with a residue problem when saving to a different file format.
I took my square image and pasted as a layer. Behind this is a raster layer flood filled with black (As the image will be going onto a black t-shirt). I used a rounded rectangle selection tool to make a mask somewhere just inside the image borders. I then applied a Gaussian blur to the mask and it faded the edges of the image beautifully. I checked with the black background layer off and again it faded nicely into transparency.
Now my issue is that when I save it as a PNG file (with background set to transparency of course) and try to use it against various coloured backgrounds there seems to be a white glow around the edges where it is meant to fade out.
View 5 Replies
View Related
Dec 14, 2012
I have a .png file that I want to place in a template. This png file is text with a transparent background. When I place this in my template, the background is shown in white. The sheet color the idw is beige, so this doesn't look very good.
Also, when I save a copy of the idw as .dwg, the white background is shown there as well. when it prints, it is ok. If there was a way to have it stay transparent in both?
View 3 Replies
View Related
Aug 24, 2011
I seem to be having problems when I lasso round a specific part of a photo taken with a white background and then try to add that part of the image to a plain #000000 black background.
I always seem to get a white outline around the image when I place it on the black background, even when its on ZERO feathered. I don't like using feathered as it adds a smudge round the outside of the image.
View 9 Replies
View Related
Jun 17, 2006
I am using my CS2 on OSX and when I view the image in a full screen mode the color around the image is grey, well it used to be grey but it is blue now. How do I change it back to neutral grey?
View 3 Replies
View Related
Nov 27, 2013
This Q must be very old. Why can´t someone invent a sigle button for this I have tried all the things by the book but still when I try to lay text image with white background over an image the white is still there althoug I made it transparent. tried to sa for web as png-8, png-24 and gif. nothing works. To use magic wand gives bad result when applied to text? So what can I do? I am trying to place text over image. I know I could write it over the image but I need the text as a transparent layer some place else.
View 6 Replies
View Related
Aug 7, 2005
How to set an image as a background of another image.
View 2 Replies
View Related
May 10, 2011
I can create a signature with image and text as in attachment, (not sure even did that) "DARN"but would like to be able to type directly on a jpeg or gif etc.
View 7 Replies
View Related
