My problem is, that photos are shown different in color between libary and development tool in Lightroom 3.6. The libary shows corrected color in photos, the development tool not.When I switch between libary and development tool sometimes, the development tool shows then the same colors.
View 2 RepliesThe colors of my cr2 files are wrong in the developement part of Lightroom. Dark pixel are turnes into blue ones, bright/white pixels are turned into red ones.
The problem does not occur if I only watch the pictures in the libary mode
Suddenly the pallete colors disappeared from my development session. I re-started all my computer and LR, but it doesn't appear in my screen. Is it necessary I reinstall LR?
View 2 Replies View RelatedThe label for Library, i.e. the word 'Library', no longer shows in the line of module labels along the top panel of my Lightroom 4 window; all the others from Develop to Web are still there. I see they're called Module Picker Buttons (Menu - Lightroom - Identity Plate Setup..). I've just downloaded Lightroom version 4.4 but that hasn't triggered the reappearance of 'Library'. So I now have to use alt-cmd-1 to access the Library module. retrieve 'Library' for the top panel? Have I unknowingly made a keystroke that disabled it? I'm running Lightroom 4.4 on Mac OS 10.6.8.
View 2 Replies View RelatedMy L 4 Library suddenly shows only the first thumbnail in a catalog. All the rest of the thumbnail windows are grey. Only thr last import sghows the full catalog.
View 3 Replies View RelatedI run a HP DV6 Laptop with Core I7 and Windows 7. While editing my photos my computer appeared to over heat (which is a recurring issue that I'm working to resolve) during mid-post production. Upon restarting my computer, and when I accessed the same photos, I got a very lengthy loading icon when I clicked on a photo under the "Develop" tab. This problem recurred and in attempt to resolve the problem I decided to delete the library and re-import the files. Upon re-import, I cannot view all the photos in the library grid view. I'm not sure if my files are now corrupt from the sudden crash or is it just a data issue with LR?
I've attached a screen shot of what the problem library looks like...
RAW files (Red) no longer show their filenames in the Library Grid Compact Cells view (now just shows numbers)!
JPGs (Green & Blue) show nothing at all, including ratings and Pick status, and the Develops are gone.
This was after having imported a LR3.6 catalog and intermittently using it for a month.
Data:
- Catalog is over 1GB in size, over 50,000 images in the Library
- Windows 7 x64 with SP1
- LR4.0 x64
I have not yet tried:
- Re-importing the LR3 Catalog backup to see what happens.
- Creating a new LR4 Catalog and see if it displays the data in the Grid Compact Cells view
I have tried:
- Optimizing/Integrity Testing the Catalog
Is there a way to add text (names or locations)so it shows on a photo from the library or develop module? I know you can add text in the slidshow module or when exporting, but it would be faster in the library/develop module.
View 2 Replies View RelatedI was editing phots when I suddenly realized that sharpening tool, neither the adjustment brush for sharpening or ordinary sharpening, would be shown in Library mode or when photos were exported. When I see the picture in Develop mode, they seem fine and I can adjust the sharpness as usual. So something goes wrong between Develop and Library mode.
I have Lightroom 4.4. The ISO level in the pictures are not high at all, so that is not the problem, as I have read some explanaitions of. When I see the picture in 1:1 in both modes, they look the same after sharpening. But if I zoom more, I can definately see big differences.
Light Room 4.2 Crashes. I was setting up Light Room and accidently clickede on Development. The program then crashed. I shut the program down and tried to start it up several times with the same result.
View 1 Replies View RelatedWhen viewing images or documents on the Cintiq they display the same colors as on my main monitor. But when I draw something in Photoshop the colors are more saturated. This is especially noticeable when I undock the working space and drag it on my main monitor.
Testing with a rainbow gradient I can see that relative to my main monitor the purple gets darker and the blue gets stronger; almost turning into a solid bar rather than a gradient. The green also gets slightly lighter.
I have a JPG file that I've created in Lightroom from a RAW file.
My computer has crashed at some point, and I lost everything, but I managed to save the original RAW file.
Is it possible to recover the development settings from the JPG file, in order to re-edit the orignal RAW file (so I could make changes right from where I left off)?
After importing to Lightroom and doing some developent changes, I decided to restart my whole Catalog. There are no XMP files for the changes I made, but surprisingly it shows after re-importing the images back into Lightroom (using "Add"), some files show as previously being edited, so now the original files (in split view) show as the last edit.
Is there any way to clear all changes made to revert back to a clean original file ?
I emailed a photo from my light room and all my development panels disappeared and will not come back. What do I do to get them to return?
View 2 Replies View RelatedI would like to be able to apply developement settings to an image and commit to them, so that the sliders would go back to zero and I can use them again.
I know I could export a develped image, then import it and continue developing this image at its intermediate stage.
But is there a way to actually render the selected dev. settings while remaining in the develop module so that I can carry on using the sliders all over again?
I have been using LR5.2 successfully for a few months now but all of a sudden I cannot see the basic settings in the Development Module. Specifically, I am not able to change Color Temperature, exposure, recovery, Clarity (very important to me), etc. I shoot RAW 100%, so I wonder if i accidentally hit some wrong key to make those basic features hidden?
View 2 Replies View RelatedAt home I still have the trial version (I wait for 4.2 to see if it will be much faster before buying it) and today I do some photo development at work (we also have 4.1 version).
What I'd like to know is it it's possible to import the processings settings of each photos to my own catalog ????
Here is how I did my work:
At home my raws are on an external USB drive and I import my pictures from this disk: path is I:Mes photos<subject + date of the photoshoot> My Lightroom catalog is in it's default path (user profile, my pictures).
At work, I put my photos on a temp director c:MyRawPictures and import them into lightroom.
Now how can I export the development settings from the lightroom at work and import them in my home setup ?
I saw a menu "import from another catalog". can I use this one ? If yes, do I need to copy the "Lightroom catalog" folder ?
When I import images no matter if RAW or JPG, when I go to the development module all images have various modifications on all slidedrs from exposure to saturation. I haven't changed any settings or global settings but each slider will already be modified. Previously when importing images all sliders were set to ZERO, but now all of those sliders are anywhere from - to + modification.
LR 4.2, Windows 7 64-bit, 24GB ram, Catalog has been optimized, Develop Settings and Metadata setting are set to none on import.
I run Lightroom 4.2 under Windows 7. All went well until this morning the development module showed a greyed out screen and LR stopped working. All other modules seem to work well. I tried a reinstallation but that doesn't work, nor does a return to 4.0 work.
View 1 Replies View RelatedI have LR4.3 for at least one year. He has worked correctly until 2 weeks ago. But now it is impossible to have correct color in the "development " part.
When i choose the pictures in the computer to load them, their colors are "normal" but after to have loaded them, The pictures are red, blue, green, yellowl etc without gradient (like solarization) Even if the picture loaded is in B&W.
And the "histogram" has the same colors.
When i decide to send these pictures to the computer, their colors are again "normal" (with the changes I have done) but without be able to control them during their passage in LR4.3.
Original picture:
The same in LR4.3
I'm been humming along just fine in Lightroom 5 until this morning. I might explain that I have been using an old iMac. The speeds been killing me so I decided to use my new MacBook Pro and get a display with it. So this weekend I set up the MacBook Pro with LR presets etc. I use an exteral HD for my photos. Since that drive was getting pretty full. I purchased a new one and copied my photos to it. In LR on the MacBook Pro, I clicked "find my photo" and it did. After that I did some editing and exporting. This morning, I couldn't export or edit in the development module. I still have my old iMac installed and I noticed I can't export from it either. Not sure what I need to do to use it.
View 3 Replies View RelatedI used to be able to select all photo's in the development module and then apply a preset (i.e. sharpen for faces) and it would apply to all photo's, a mass edit would occur. Now when I select all and add a preset, it only applies to the photo being viewed at that time, i can no longer do mass edits in this manner. Is there a setting I am missing which allows mass editing in Development module? I am using Lightroom 5 for Mac. I edit 100's of photo's at once, and I like to add sharpening to all at the end rather than clicking each one at a time.
View 1 Replies View RelatedHow could I share development progress with multiple devices? I would like to share the library on the desktop and notebook. According to faq it's not possible to put library on a network ( I have a nas), but this would be the best solution!
View 4 Replies View RelatedI was eventually able to download Lightroom 5 after paying for it twice, It took over 2 hours on online chat for them to release a code to activate the download. Now that I have it i am working on a class project that's due on Monday . I was in the process of making adjustment in the Development module when it suddenly disappeared. What can I do to get it back up? I looked under "Tools" and Efit biut cannot activete any of the features that I need to work on these photos.
View 2 Replies View RelatedI have moved the library folder in OSX and then tried to start lightroom again pointing it to the new library location. Afterwards all Previews were replaced by grey squares (with color curves showing on the right, stars etc. but no image). It looks like the previews are not created but all the information are there
why when moving to the Developer rider, the Photos appear and i can work on it again. Thereafter it also appears again in the previews. S
Tried to optimize library but after 6 days of process ongoing i stopped with no changes at all to the library. Have about 60k photos in the library.I have tried the monitor settings but that makes no difference.This also happens with newly imported pictures,the ones that were appearing clearly in the library are grey at the next start of the project.running lightroom 5 with imac and latest osx.
In LR you can set the left and right panels, in the development module, to solo mode, and I think nearly everyone does. My problem is that I lose the mode each time I leave LR and have to reset it each time I enter LR. Normally the panel’s stays in solo mode and in previous versions have. I’ve been using LR since the public beta way back in 12/2006.
Why my LR doesn’t stay in solo mode or how I can get it to stay in solo mode?
I am changing computers, how I can move the development info with my master files?
View 1 Replies View RelatedLR 4.3, 59th reinstall (i lost count), standard HP pc setup, triple-core.
workflow: i develop the master to the point where i want to diverge, then create a virtual copy, finish developing and publish to hard drive. Have done this a million times, but since most recent reinstall (for a plethora of reasons, but mostly difficulties with performance and performance - and oh! performance... ;-), it publishes only the undeveloped original. I've tried publishing the master, just to see what happens, and ditto: only the unedited raw file is displaying in my published folder on the hard-drive.
i am careful to select 'Show PUBLISHED folder on hard-drive' from the right-click drop-down on the published image in the hard-drive publishing module, which in lightroom DOES reflect all changes, but the image on the hard-drive is the original raw file, renamed to the publish-service's specs.
Having to do an extra export into ps6 (which does reflect changes), and re-save for no other reason than to preserve development is time-consuming and destructive to my workflow, which is darned complicated enough as it is!
Is it possible to add all RAL colors to the Inventor style library?
(IV10 SP1)
I am working with Cs6 (Windows 7). I am trying to apply a gradient fill to an object, but don't know how to get the swatches to show colors. All I have is graytones. How do I load the color swatches? I do have the gradients and swatches open in the tools panel, but the swatches is just empty.
View 2 Replies View RelatedFirst, I have not grasped the extent yet of how the new appearance library works.. we don't get crazy with colors, reflections etc.. but we do have a handful of colors that we use on the machines we use.. so instead of using the default appearance library, i made a new appearance library. All this went well, but i periodically as i need them will add colors to it.. problem is that i'm obviously doing something wrong, because my colors don't always stay in there after i restart Inventor.. and yesterday, i can't seem to keep any of the colors i setup in there to stay.. all i want to do is copy specific colors from inventors appearance library.. drag them into mine, rename them, maybe tweak the color, and then they be there for next time.. why won't they stay?
The edit pencil will come up on my library.. i've done the release edit after i'm done.. everything works in this inventor session, but if i turn inventor off and back on again.. they are gone.. only thing i have thought of remaining is that 3 users on our network share the same design styles location so we all our using same stuff, so is the file inventor uses in design styles to save to read only or something, but i read that appearances aren't saved in design styles.. How to do this and the colors stay and populate through all the existing stuff.. I have got the colors to lock into my template ipt in the doc appearances.. and i've done the save to custom library thing.. works until i restart inventor..