Photoshop :: CS5 Shows Colors Incorrectly On CintiqUX21
Aug 15, 2012
When viewing images or documents on the Cintiq they display the same colors as on my main monitor. But when I draw something in Photoshop the colors are more saturated. This is especially noticeable when I undock the working space and drag it on my main monitor.
Testing with a rainbow gradient I can see that relative to my main monitor the purple gets darker and the blue gets stronger; almost turning into a solid bar rather than a gradient. The green also gets slightly lighter.
View 2 Replies
ADVERTISEMENT
Dec 18, 2012
Just installed acr7.3 and cs6. I have previously saved jpgs but wanted to play with POSSIBLE settings in the new ACR. Ok so I make some changes and only say DONE.. I do not open and resave. Going back to Bridge.. the preview now shows me the 'new' acr tweaked version and that jpg will NOT open in CS6 again without going through bridge to apply the tweaks I made.
Problem is, the jpg itself is still saved the OLD way and I want that version back. How do I get the bridge to show the saved jpg that I have, once I play with it in acr??
View 4 Replies
View Related
Jul 28, 2012
With all the service packs and updates installed 2012 still fails to sometimes recognize frame members properly. Not only is the frame mitre being ignored, the frame was never as long as the idw is showing. It was only as long as the edge. I have spent hours deleting and re-created the frame, views and even completely re-created the drawing but why it's doing this. 2010, 2011 & 2012 have all had frame generator bugs.
View 2 Replies
View Related
Nov 8, 2012
I recently updated my operating system to MAC OS 10.8 and as a result, Photoshop 5.5 no longer prints colors accurately. I corresponded with the tech department at Adobe for more than a week and we determined that my user settings did not migrate properly when I upgraded, resulting in skewed colors when printing from Photoshop. In running tests, we made a new "root" user and Photoshop printed correctly when using that user. How to fix my user settings/profiles so that my paper and printer profiles operate correctly in MAC OS 10.8 when printing from Photoshop?
View 4 Replies
View Related
Feb 5, 2009
I recently bought CS4 and have noticed that everything displays differently in Photoshop than anywhere else. I can not get a pure white. Pure white looks yellow, like french vanilla ice cream.
I have tried everything I can think of to rectify this situation. I have tried changing color profiles, etc. but I obviously don't know what I'm doing, because none of the changes have any effect.
I really need to get this fixed. I have been a Photoshop user for 15 years, and throughout all the versions I've used prior to this one, everything displays properly. I am BUGGED by this, big time. Such expensive software should work right.
I am using a 22" Samsung LCD monitor, if that makes any difference.
I can send screen shots to anyone...
View 1 Replies
View Related
Jan 22, 2012
I edited my CR2 pictures in Lightroom. After converting to any format the colors were colder than in original image. I opened it in Photoshop, Irfanview and Firefox. In Lightroom the image looked same as original. Both Lightroom and Photoshop are using ProPhoto RGB. I tried converting to different color spaces with no luck.
View 1 Replies
View Related
Feb 9, 2012
My problem is, that photos are shown different in color between libary and development tool in Lightroom 3.6. The libary shows corrected color in photos, the development tool not.When I switch between libary and development tool sometimes, the development tool shows then the same colors.
View 2 Replies
View Related
Jul 20, 2012
It was working fine. Then I just did a simple command (pattern a part) and the entire workspace blinked out. The first time it happened I hit UNDO and it was back. So I got out of the drawing and got back in and tried the pattern again. Same issue but this time when I hit UNDO it would not come back. I closed the file without saving and when I went back in the file the workspace is still nothing but white screen. In the browser everything is still visible except for those that I had already changed to invisible. I tried making an invisible to visible and nothing happened. I got out and tried opening the "old version" which should've been before any of this happened and it is also blank. I can go to an ipt or iam in the browser and hit open and it will open in another screen just fine. I just can't see my main assembly. I have Inventor 2012. It shows no errors or messages. I have even rebooted.
I looked thru the forum and found a past issue back in 2005 identical. I tried doing Find in Window on an item in the browser but for some reason that option is not even in the list when I right click.
View 6 Replies
View Related
Mar 20, 2013
I'm using save for web from Photoshop to save a png 24 (so, with transparency). When using png files with transparent backgrounds the colors end up showing a bounding boxes of each element. So if I have a solid black zero, and a red TM om the same image it looks fine everywhere except 3dsMax. In Max it shows as a big black box, and a little red box. The alpha channel reads just fine though.
I am quite annoyed that I have to go back and save all my maps as jpgs with one of them being an alpha map if I want to see them properly in the viewport. I can use the images because it only messes up the outside of the color, but it's difficult to map the placement of certain images. Surely a few people here use Photoshop to create png files for import into Max right?
View 6 Replies
View Related
Mar 13, 2013
Here is a logo, pasted as a smart object from Illustrator into Photoshop CS5.1 :
Here is the same logo pasted as a smart object from Illustrator to Photoshop CS6:
Note the gaps in the orange gradient at the top of the graphic, and the transparent areas in the border of the shield. This discrepancy appears (to me) to be a result of using a "sharper" antialiasing mode in CS6 which is leaving 1 pixel wide gaps between objects that are actually completely aligned to the same points in Illustrator. Scaling the object will result in the gaps showing up in different areas of the graphic. This is incorrect behavior on the part of Photoshop CS6.
View 67 Replies
View Related
Mar 28, 2013
A client provided me with 100 dpi Photoshop files containing text. When I changed the file to 300 dpi, the type was slightly fuzzy. On closer examintation, I discovered that the type that was 11 pt was now reporting 3.7 pt after uprezing - but it was the correct new physical size.
I opened the same file in PS 5.5 and the font size was reported correctly and was not fuzzy.
Bug? Operator Error? This is all from Adobe Cloud.
View 5 Replies
View Related
Jun 14, 2013
Mac 10.6.8 with newly installed CS6 has the following problems.
1-tif files save with a pxr extension
2-jpeg files save with an img extension
3-when opening a file "Enable" remains blank even when previously set to "All Readable Documents."
View 1 Replies
View Related
Aug 19, 2013
Photoshop has started acting very strange. It's incorrectly detecting less than 512MB VRAM (AMD 5770HD, 1024MB VRAM). I thought it may be a graphics driver issue but neither the latest stable nor beta seem to effect this.
Since 3D features have been disabled, the application is unstable. Changing tools a few times will always result in an appcrash exception.
System specs:
Windows 7 x64 ultimate
Core i5-3470
16GB RAM
AMD HD5770
I have a feeling I know what's causing 3D mode to disable and that's the integrated card on this motherboard. This currently acts as an additional monitor output and is set as the primary device in the bios (and I can't change this) but shares some state via some LucidLogix thing on the motherboard. Is there any way to disable this VRAM check?
View 8 Replies
View Related
May 22, 2013
I could change the file type to psd, they would open.
View 1 Replies
View Related
Feb 7, 2013
A rather bizarre issue this. I have reinstalled Elements 10 on a system with Win 8 64 bit. If I attempt to crop a portrait format photo e.g. 2009px x 3034px to 1920 x 2400, the crop frame for the width falls outside the photo. Cropping a landscape photo works correctly but the problem persists even if the portrait photo is rotated to 'landscape'.If I crop the same portrait photo on an XP system, there is no problem.
View 2 Replies
View Related
Jun 28, 2012
I recently installed CS5 on my laptop after first removing it from my previous machine.All licences were validated so no problems there.Now when using paint bucket in Photoshop, the colors that I select in the color picker are not the colors that result when I use the paint bucket.
If I create a new black canvas then the colors selected in color picker work with paint bucket.But if I attempt to recolor the background in an existing image that I import into Photoshop, I get the mismatch with colors when I use paint bucket. My method for selecting colors is the same in each case, I select 'set foreground color' and set the color using html values entry at the bottom of the panel.
View 11 Replies
View Related
Jul 7, 2013
Just wanted to print a new photo and realized that the colors in print preview do not match the colors in soft proofing. In both cases I selected the same icc profile and rendering method. The print colors matched the colors in print preview. I never had a problem so far. All new prints will be checked with soft proofing and adjusted when necessary. I never paid attention to the color rendition in print preview and all prints perfectly matched the colors from the soft proofing. I was surprised when my print came out of the printer and the colors weren't matching the soft proofing colors, but that of the print preview.
I don't understand why Photoshop renders the colors differently in the first place. See attached screenshot for the difference in the blue/cyan colors. I don't care if the print view colors will match the print, but I do care when soft proofing is not working.
View 2 Replies
View Related
Jun 12, 2012
Error message:R6034 An application has made an attempt to load the C runtime library incorrectly
View 9 Replies
View Related
Aug 26, 2013
Yesterday, I sent a drawing that I scaled as 1/2" = 1'-0" in an Adobe PDF, and was told by the receiver that the drawing scale was off by 3-4% when they measured it. Hoping that is was the printer's problem, I sent a drawing from another file to FEDEX, and went and scaled that one myself. Sure enough, it's off. It doesn't matter whether it is windowed or brought in a paper space viewport.
View 9 Replies
View Related
Oct 29, 2011
Works as it should in Direct3d but Nitrous displays specular weaker than it should. It shows up correctly when you render though.
View 1 Replies
View Related
Oct 16, 2012
I have a problem with fonts from 2.8 version . Some fonts are displayed incorrectly, ie. than otherwise would be.
View 2 Replies
View Related
Jan 6, 2014
I have two PSD files that won't render correctly in Illustrator. If I open the PSD files in Photoshop, everything looks OK, and if I print it, the file looks good. But when I place it in Illustrator, part of the picture is missing, and if I print it, it doesn't show up on the page. These are the only two files I've had trouble with and they both originated from the same company. Is there something wrong with the photo, perhaps?
View 4 Replies
View Related
May 12, 2013
Somehow my 2013 pictures as well as some random pics from 2009 and 2010 were made into subfolders of 01/19/2012. How can I correct this? Also does the message about moving photos mean that if I move a photo, I lose the original and all changes?
View 2 Replies
View Related
Oct 11, 2012
Inventor is displaying the "male symbol" instead of a carriage return. It only does this once in a while, maybe once in 50 dimension edits, and if I edit the dimension again, backspace out the return and replace it then it will display correctly.
I'm using a Quadro 600 with an AutoDesk certified driver. Memory isn't pegged, only using half of my installed 8GB. Bug?
View 8 Replies
View Related
Mar 27, 2013
Weird behavior: the dimensions are moved incorrectly,In the attached dwg (and screenshots), as the drawing is moved, then the dimensions are moved but incorrectly. I’m not sure concerning the sort of settings that influence them to behave like this.
View 5 Replies
View Related
Dec 28, 2011
I have a simple head rig that I am working with (chest, neck, and head bones) that I can't get to deform correctly. It is a very high poly model (tris) because I imported it in from Leonar3Do so the skinning was very basic.
Anyway, I linked the eyes to the head bone and when I move the head bone the eyes follow it correctly but the mesh deforms very slightly so as to keep the eyes from being lined up with their sockets. I can provide the file if need be.
View 1 Replies
View Related
Mar 31, 2013
I have Illustrator CS6 for mac ox mountain lion. I was working with a vector image and everything was working fine. Now when i try to move any anchor point, it acts as if its not calabrated, for lack of better terms. If i try to move it one way it snaps twoards another, or if i try to adjust the hadles, they do the same. it doesn't follow my direction like it did befor. Its now impostible to use!
View 2 Replies
View Related
Mar 14, 2013
I have a Shape Layer in Photoshop. When the .PSD is imported as a comp, AE CS6 is layering the masks incorrectly. It requires the user to manually re-order the masks to display correctly.
is there any way to interpret PS shape layers as pixels or Illustrator vectors instead of masks? [without rasterizing in PS, of course] When AE turns them into masks, AE obviously won't update the masks if I make changes to the shape in Photoshop.)
View 5 Replies
View Related
Jan 6, 2004
The colors of pictures is much darker when working in photoshop than when I open it normally. And vice versa, I work on images inside photoshop, and I get the colors I want, but once I save it to bmp or jpg or anything else, all the colors are much lighter.
i'm using photoshop 7.
View 3 Replies
View Related
Apr 28, 2012
Incorrect brick pattern renders around window openings, refer attached.
View 4 Replies
View Related
Dec 19, 2013
I have an assembly with two similar items in it and have written code to replace the component based on a given selection. If I try to change item one, nothing happens. If I change items two, it changes both item two as well as item one. In the attached screenshot item one should have a full cover panel and item two should be open; however, they are both the same. I have stabilized the browser by changing the names to "Leg One:1" and Leg Two:1) and the components that are being replaced are standard assemblies to be replaces with other standard assemblies.
View 4 Replies
View Related
