How could I share development progress with multiple devices? I would like to share the library on the desktop and notebook. According to faq it's not possible to put library on a network ( I have a nas), but this would be the best solution!
View 4 RepliesWe have about 10,000 + personal photos. Can I install the LR Database on my server so that my wife and I can both be adding metatags to the photos at the same time ? I don't mind if I have to buy 2 copies, but I am more concerned about sharing the database.
View 1 Replies View RelatedHow can I share a catalog between multiple users? I'm sharing on three iMacs and using Lightroom 4.
View 4 Replies View RelatedIn my (large) Lightroom 5.2 (Windows) library I have three instances of, essentially, the same network share (a Drobo NAS) which appear separately in the library.
One appears as Share (\nas) L:, one as \nasShare and one as \nasshare. The contents of the share are spread randomly across the three - so one might contain the folders seriesevent1, seriesevent4 and seriesevent5 and another seriesevent2, seriesevent3 and seriesevent6.
Is there an easy way to convince Lightroom that they're all the same physical location and merge them in the library? No amount of dragging, dropping, importing or synchronization seems to have had any effect so far!
Am I to understand if I have multiple artboards, they all will share the same layers? Each artboard does not have it's own separate set of layers, am I right? This is my first time using the artboard feature... CS6.
View 3 Replies View RelatedLight Room 4.2 Crashes. I was setting up Light Room and accidently clickede on Development. The program then crashed. I shut the program down and tried to start it up several times with the same result.
View 1 Replies View RelatedI have Mac OSX 10.7.5 The catalog exists on a shared LOCAL folder that other users have read-write access to The catalog works fine for the 1st user (no issues viewing, tagging, or updating photos & repairing it yields no issues)However when I try to open this catalog with any other user I receive an error that the catalog may be corrupt and therefore cannot be opened...
Any way to share their catalog with multiple users on a Mac?
I have a JPG file that I've created in Lightroom from a RAW file.
My computer has crashed at some point, and I lost everything, but I managed to save the original RAW file.
Is it possible to recover the development settings from the JPG file, in order to re-edit the orignal RAW file (so I could make changes right from where I left off)?
After importing to Lightroom and doing some developent changes, I decided to restart my whole Catalog. There are no XMP files for the changes I made, but surprisingly it shows after re-importing the images back into Lightroom (using "Add"), some files show as previously being edited, so now the original files (in split view) show as the last edit.
Is there any way to clear all changes made to revert back to a clean original file ?
The colors of my cr2 files are wrong in the developement part of Lightroom. Dark pixel are turnes into blue ones, bright/white pixels are turned into red ones.
The problem does not occur if I only watch the pictures in the libary mode
Why can I not send multiple emails under BCC. in the Adobe Share?
View 2 Replies View RelatedI emailed a photo from my light room and all my development panels disappeared and will not come back. What do I do to get them to return?
View 2 Replies View RelatedI would like to be able to apply developement settings to an image and commit to them, so that the sliders would go back to zero and I can use them again.
I know I could export a develped image, then import it and continue developing this image at its intermediate stage.
But is there a way to actually render the selected dev. settings while remaining in the develop module so that I can carry on using the sliders all over again?
I have been using LR5.2 successfully for a few months now but all of a sudden I cannot see the basic settings in the Development Module. Specifically, I am not able to change Color Temperature, exposure, recovery, Clarity (very important to me), etc. I shoot RAW 100%, so I wonder if i accidentally hit some wrong key to make those basic features hidden?
View 2 Replies View RelatedAt home I still have the trial version (I wait for 4.2 to see if it will be much faster before buying it) and today I do some photo development at work (we also have 4.1 version).
What I'd like to know is it it's possible to import the processings settings of each photos to my own catalog ????
Here is how I did my work:
At home my raws are on an external USB drive and I import my pictures from this disk: path is I:Mes photos<subject + date of the photoshoot> My Lightroom catalog is in it's default path (user profile, my pictures).
At work, I put my photos on a temp director c:MyRawPictures and import them into lightroom.
Now how can I export the development settings from the lightroom at work and import them in my home setup ?
I saw a menu "import from another catalog". can I use this one ? If yes, do I need to copy the "Lightroom catalog" folder ?
When I import images no matter if RAW or JPG, when I go to the development module all images have various modifications on all slidedrs from exposure to saturation. I haven't changed any settings or global settings but each slider will already be modified. Previously when importing images all sliders were set to ZERO, but now all of those sliders are anywhere from - to + modification.
LR 4.2, Windows 7 64-bit, 24GB ram, Catalog has been optimized, Develop Settings and Metadata setting are set to none on import.
I run Lightroom 4.2 under Windows 7. All went well until this morning the development module showed a greyed out screen and LR stopped working. All other modules seem to work well. I tried a reinstallation but that doesn't work, nor does a return to 4.0 work.
View 1 Replies View RelatedI have LR4.3 for at least one year. He has worked correctly until 2 weeks ago. But now it is impossible to have correct color in the "development " part.
When i choose the pictures in the computer to load them, their colors are "normal" but after to have loaded them, The pictures are red, blue, green, yellowl etc without gradient (like solarization) Even if the picture loaded is in B&W.
And the "histogram" has the same colors.
When i decide to send these pictures to the computer, their colors are again "normal" (with the changes I have done) but without be able to control them during their passage in LR4.3.
Original picture:
The same in LR4.3
I'm been humming along just fine in Lightroom 5 until this morning. I might explain that I have been using an old iMac. The speeds been killing me so I decided to use my new MacBook Pro and get a display with it. So this weekend I set up the MacBook Pro with LR presets etc. I use an exteral HD for my photos. Since that drive was getting pretty full. I purchased a new one and copied my photos to it. In LR on the MacBook Pro, I clicked "find my photo" and it did. After that I did some editing and exporting. This morning, I couldn't export or edit in the development module. I still have my old iMac installed and I noticed I can't export from it either. Not sure what I need to do to use it.
View 3 Replies View RelatedUsing Lightroom's new book feature? I can't find where to save a book that I am in progress with in Lightroom 4.2. Why doesn't LR have a "Save as" feature like 99% of all other programs on the planet? !"{}#@!!!
View 3 Replies View RelatedI used to be able to select all photo's in the development module and then apply a preset (i.e. sharpen for faces) and it would apply to all photo's, a mass edit would occur. Now when I select all and add a preset, it only applies to the photo being viewed at that time, i can no longer do mass edits in this manner. Is there a setting I am missing which allows mass editing in Development module? I am using Lightroom 5 for Mac. I edit 100's of photo's at once, and I like to add sharpening to all at the end rather than clicking each one at a time.
View 1 Replies View RelatedMy problem is, that photos are shown different in color between libary and development tool in Lightroom 3.6. The libary shows corrected color in photos, the development tool not.When I switch between libary and development tool sometimes, the development tool shows then the same colors.
View 2 Replies View RelatedI was eventually able to download Lightroom 5 after paying for it twice, It took over 2 hours on online chat for them to release a code to activate the download. Now that I have it i am working on a class project that's due on Monday . I was in the process of making adjustment in the Development module when it suddenly disappeared. What can I do to get it back up? I looked under "Tools" and Efit biut cannot activete any of the features that I need to work on these photos.
View 2 Replies View RelatedSuddenly the pallete colors disappeared from my development session. I re-started all my computer and LR, but it doesn't appear in my screen. Is it necessary I reinstall LR?
View 2 Replies View RelatedWhen I'm doing a large import, all I can see is the little white progress bar in the upper left. Since it sometimes gets hung up on an operation, it doesn't provide enough feedback about the processes.
I'd prefer to be able to double click that and see a full activity report in a new window of what is getting imported as it's happening, with a separate progress bar for each item. I'd like to see this for all other actions as well, but importing would be my priority.I requesting a new feature? I'm running Adobe Photoshop Lightroom 4.3 RC [858820].
I have moved the library folder in OSX and then tried to start lightroom again pointing it to the new library location. Afterwards all Previews were replaced by grey squares (with color curves showing on the right, stars etc. but no image). It looks like the previews are not created but all the information are there
why when moving to the Developer rider, the Photos appear and i can work on it again. Thereafter it also appears again in the previews. S
Tried to optimize library but after 6 days of process ongoing i stopped with no changes at all to the library. Have about 60k photos in the library.I have tried the monitor settings but that makes no difference.This also happens with newly imported pictures,the ones that were appearing clearly in the library are grey at the next start of the project.running lightroom 5 with imac and latest osx.
In LR you can set the left and right panels, in the development module, to solo mode, and I think nearly everyone does. My problem is that I lose the mode each time I leave LR and have to reset it each time I enter LR. Normally the panel’s stays in solo mode and in previous versions have. I’ve been using LR since the public beta way back in 12/2006.
Why my LR doesn’t stay in solo mode or how I can get it to stay in solo mode?
I have several different views xreffed into a single view, should'nt they all share the base construct? i.e. If I want to overlay the lighting plan, HVAC plan and my reflected ceiling plan- they should share the first floor construct. Instead each one brings in the same base construct and then when you overlay them, the walls interfere and you get wall errors.
View 9 Replies View RelatedMac OS 10.6
Illustrator CS6
Illustrator CS6 hangs (spinning beach ball) when saving files to the computer's local HD while having multiple server share points mounted.
I am NOT opening or saving the file to or from a server. The server is mounted so that I can move my saved file to it once complete.
Unmounting the servers fixes the problem and Illustrator CS6 returns to being normal (not causing a spinning beach ball).
This is repeatable, not intermittent.
I am changing computers, how I can move the development info with my master files?
View 1 Replies View RelatedLR 4.3, 59th reinstall (i lost count), standard HP pc setup, triple-core.
workflow: i develop the master to the point where i want to diverge, then create a virtual copy, finish developing and publish to hard drive. Have done this a million times, but since most recent reinstall (for a plethora of reasons, but mostly difficulties with performance and performance - and oh! performance... ;-), it publishes only the undeveloped original. I've tried publishing the master, just to see what happens, and ditto: only the unedited raw file is displaying in my published folder on the hard-drive.
i am careful to select 'Show PUBLISHED folder on hard-drive' from the right-click drop-down on the published image in the hard-drive publishing module, which in lightroom DOES reflect all changes, but the image on the hard-drive is the original raw file, renamed to the publish-service's specs.
Having to do an extra export into ps6 (which does reflect changes), and re-save for no other reason than to preserve development is time-consuming and destructive to my workflow, which is darned complicated enough as it is!