Lightroom :: After Import In 4.2 All Images Have Development Modifications
Nov 9, 2012
When I import images no matter if RAW or JPG, when I go to the development module all images have various modifications on all slidedrs from exposure to saturation. I haven't changed any settings or global settings but each slider will already be modified. Previously when importing images all sliders were set to ZERO, but now all of those sliders are anywhere from - to + modification.
LR 4.2, Windows 7 64-bit, 24GB ram, Catalog has been optimized, Develop Settings and Metadata setting are set to none on import.
View 2 Replies
ADVERTISEMENT
Aug 26, 2013
After importing to Lightroom and doing some developent changes, I decided to restart my whole Catalog. There are no XMP files for the changes I made, but surprisingly it shows after re-importing the images back into Lightroom (using "Add"), some files show as previously being edited, so now the original files (in split view) show as the last edit.
Is there any way to clear all changes made to revert back to a clean original file ?
View 10 Replies
View Related
Oct 1, 2012
At home I still have the trial version (I wait for 4.2 to see if it will be much faster before buying it) and today I do some photo development at work (we also have 4.1 version).
What I'd like to know is it it's possible to import the processings settings of each photos to my own catalog ????
Here is how I did my work:
At home my raws are on an external USB drive and I import my pictures from this disk: path is I:Mes photos<subject + date of the photoshoot> My Lightroom catalog is in it's default path (user profile, my pictures).
At work, I put my photos on a temp director c:MyRawPictures and import them into lightroom.
Now how can I export the development settings from the lightroom at work and import them in my home setup ?
I saw a menu "import from another catalog". can I use this one ? If yes, do I need to copy the "Lightroom catalog" folder ?
View 1 Replies
View Related
Nov 4, 2012
This issue occured shortly after update to 4.2, but not directly after. I am using windows 8.
The issue that occurs is after importing images they are adjusted automatically to develop module cross process 1. After dealing with this annoyance for a bit of time I realized that I can not even "RESET ALL" the images to delete the adjustment. In delving into other images that have been in my database for quite some time, I have tried to "RESET ALL", which resets images to CROSS PROCESS 1. I have never set import to automatically adjust.
View 5 Replies
View Related
Mar 13, 2012
I just upgraded from LR3.6 to 4.0. When trying to import images the import module freezes for a few minutes and then displays the import screen. However, when selecting a source the program freezes again and eventually crashes.
I had the same issue when upgrading to 3.6 some time ago and then found that disabling some USB controllers solved the problem. This works for LR4 as well. As I don't need all USB connections this is a workable solution, however, disabling controllers should not be necessary to run a program.
System is an Acer Aspire 7811 64 bits w/ Intel i7, Win 7 Home Premium, 8 GB internal mem and no external drives.
View 8 Replies
View Related
May 19, 2012
I'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot? Maybe there is some flag I've got set incorrectly.
View 1 Replies
View Related
Jan 17, 2011
I'm trying to import photos into LR3.3, and the thumbnails are grayed out, as is the import button. The photos come from two other cameras -- one Canon Elf, the other I'm not sure. I received them through dropbox, and they open fine with Bridge and Photoshop CS4.
View 4 Replies
View Related
Mar 25, 2011
Lightroom will not display preview images during import of raw images. Any images in other formats display fine but with raw images I get a gray window the size of the preview image and the words "preview unavailable for this file".
Running Windows XP 64, Lightroom 3.3.
View 3 Replies
View Related
Nov 9, 2012
Light Room 4.2 Crashes. I was setting up Light Room and accidently clickede on Development. The program then crashed. I shut the program down and tried to start it up several times with the same result.
View 1 Replies
View Related
Dec 21, 2013
I have a JPG file that I've created in Lightroom from a RAW file.
My computer has crashed at some point, and I lost everything, but I managed to save the original RAW file.
Is it possible to recover the development settings from the JPG file, in order to re-edit the orignal RAW file (so I could make changes right from where I left off)?
View 23 Replies
View Related
Jul 2, 2013
The colors of my cr2 files are wrong in the developement part of Lightroom. Dark pixel are turnes into blue ones, bright/white pixels are turned into red ones.
The problem does not occur if I only watch the pictures in the libary mode
View 1 Replies
View Related
May 19, 2012
I emailed a photo from my light room and all my development panels disappeared and will not come back. What do I do to get them to return?
View 2 Replies
View Related
Nov 5, 2012
I would like to be able to apply developement settings to an image and commit to them, so that the sliders would go back to zero and I can use them again.
I know I could export a develped image, then import it and continue developing this image at its intermediate stage.
But is there a way to actually render the selected dev. settings while remaining in the develop module so that I can carry on using the sliders all over again?
View 2 Replies
View Related
Nov 24, 2013
I have been using LR5.2 successfully for a few months now but all of a sudden I cannot see the basic settings in the Development Module. Specifically, I am not able to change Color Temperature, exposure, recovery, Clarity (very important to me), etc. I shoot RAW 100%, so I wonder if i accidentally hit some wrong key to make those basic features hidden?
View 2 Replies
View Related
Oct 18, 2012
I run Lightroom 4.2 under Windows 7. All went well until this morning the development module showed a greyed out screen and LR stopped working. All other modules seem to work well. I tried a reinstallation but that doesn't work, nor does a return to 4.0 work.
View 1 Replies
View Related
Mar 21, 2013
I have LR4.3 for at least one year. He has worked correctly until 2 weeks ago. But now it is impossible to have correct color in the "development " part.
When i choose the pictures in the computer to load them, their colors are "normal" but after to have loaded them, The pictures are red, blue, green, yellowl etc without gradient (like solarization) Even if the picture loaded is in B&W.
And the "histogram" has the same colors.
When i decide to send these pictures to the computer, their colors are again "normal" (with the changes I have done) but without be able to control them during their passage in LR4.3.
Original picture:
The same in LR4.3
View 4 Replies
View Related
Jul 1, 2013
I'm been humming along just fine in Lightroom 5 until this morning. I might explain that I have been using an old iMac. The speeds been killing me so I decided to use my new MacBook Pro and get a display with it. So this weekend I set up the MacBook Pro with LR presets etc. I use an exteral HD for my photos. Since that drive was getting pretty full. I purchased a new one and copied my photos to it. In LR on the MacBook Pro, I clicked "find my photo" and it did. After that I did some editing and exporting. This morning, I couldn't export or edit in the development module. I still have my old iMac installed and I noticed I can't export from it either. Not sure what I need to do to use it.
View 3 Replies
View Related
Jul 28, 2013
I used to be able to select all photo's in the development module and then apply a preset (i.e. sharpen for faces) and it would apply to all photo's, a mass edit would occur. Now when I select all and add a preset, it only applies to the photo being viewed at that time, i can no longer do mass edits in this manner. Is there a setting I am missing which allows mass editing in Development module? I am using Lightroom 5 for Mac. I edit 100's of photo's at once, and I like to add sharpening to all at the end rather than clicking each one at a time.
View 1 Replies
View Related
Feb 9, 2012
My problem is, that photos are shown different in color between libary and development tool in Lightroom 3.6. The libary shows corrected color in photos, the development tool not.When I switch between libary and development tool sometimes, the development tool shows then the same colors.
View 2 Replies
View Related
Jan 10, 2014
How could I share development progress with multiple devices? I would like to share the library on the desktop and notebook. According to faq it's not possible to put library on a network ( I have a nas), but this would be the best solution!
View 4 Replies
View Related
Dec 7, 2013
I was eventually able to download Lightroom 5 after paying for it twice, It took over 2 hours on online chat for them to release a code to activate the download. Now that I have it i am working on a class project that's due on Monday . I was in the process of making adjustment in the Development module when it suddenly disappeared. What can I do to get it back up? I looked under "Tools" and Efit biut cannot activete any of the features that I need to work on these photos.
View 2 Replies
View Related
Feb 17, 2013
Suddenly the pallete colors disappeared from my development session. I re-started all my computer and LR, but it doesn't appear in my screen. Is it necessary I reinstall LR?
View 2 Replies
View Related
Sep 21, 2013
I have moved the library folder in OSX and then tried to start lightroom again pointing it to the new library location. Afterwards all Previews were replaced by grey squares (with color curves showing on the right, stars etc. but no image). It looks like the previews are not created but all the information are there
why when moving to the Developer rider, the Photos appear and i can work on it again. Thereafter it also appears again in the previews. S
Tried to optimize library but after 6 days of process ongoing i stopped with no changes at all to the library. Have about 60k photos in the library.I have tried the monitor settings but that makes no difference.This also happens with newly imported pictures,the ones that were appearing clearly in the library are grey at the next start of the project.running lightroom 5 with imac and latest osx.
View 6 Replies
View Related
Jan 21, 2013
In LR you can set the left and right panels, in the development module, to solo mode, and I think nearly everyone does. My problem is that I lose the mode each time I leave LR and have to reset it each time I enter LR. Normally the panel’s stays in solo mode and in previous versions have. I’ve been using LR since the public beta way back in 12/2006.
Why my LR doesn’t stay in solo mode or how I can get it to stay in solo mode?
View 2 Replies
View Related
May 2, 2013
Whilst PS reads all my files from external hard drives (previously worked with Windows)onto my Imac, LR sees the files but they are "dimed" and thus will not import. There is no error message.
View 1 Replies
View Related
May 26, 2012
I have just purchased a Canon 5D Mark III. I have Lightroom 3 and Lightroom 4. I have tried to import RAW images, but neither of the Lightrooms will import the images. Do I need a plug in or update?
View 3 Replies
View Related
Apr 24, 2013
I have all of my photographs backed up on a Westeren Digital hard drive. It is called "My Book K" How can I get that into LR so I can imoport, or export from LR? Also is it hard on my external hard drive to leave it on all the time?
View 2 Replies
View Related
Mar 23, 2014
I can't import images into lightroom..
View 9 Replies
View Related
Jun 22, 2012
I really am utterly confused by LR.3.6
What I am doing is for every new set of images, say a wedding, I am setting up a new catalogue on the off board HD.
I then import the images as DNG's & that's after first off loading them as the original Nikon RAW files (I don't trust either LR or myself to get it right) onto another HD.
So, now I have 2x copies.
One original non-PP RAW files
One open in LR as DNG's which I then work upon.
Now, a few days later, I plug in the HD into my PC and Lo! File name is off line or missing.
This happens more often than not, so maybe 75% of my work flow is stymatised by having to work out what's happened or I have to start again on the PP.
At this point, I am trying to both open the .lrcat file either from within LR / File / Open Recent or directly from the file on the offboard HD.
I can see the DNG's but LR seems unable to do so.
What error am I making?
View 11 Replies
View Related
Feb 24, 2014
I recently upgraded from Lightroom 4.x to 5.3, and I am now unable to import any new images. The import dialog allows me to select files, but once I press the import button (and this includes using "Add", "Copy", and "Copy as DNG"), nothing happens. I've left it 'transferring' overnight — nothing. I eventually cancel and a box pops up that says "No photos or videos were found to import.
I've tried uninstalling and reinstalling LR5 and working with a fresh catalog. No luck. I even deleted all the preference files and everything. Nothing. I'm about to be in a real bind if I can't import new work soon.
View 5 Replies
View Related
Feb 28, 2013
When I insert a CF card into my reader, thumbnails of my images appear in the organizer. When I click on "Import", the following message appears: "The following files were not imported because they could not be read." I didn't have this problem with versions 2 or 3 of Lightroom.
View 8 Replies
View Related
