Lightroom will not display preview images during import of raw images. Any images in other formats display fine but with raw images I get a gray window the size of the preview image and the words "preview unavailable for this file".
Running Windows XP 64, Lightroom 3.3.
I'm using LIghtroom 5.3, and raw camera 8.3, the latest update available. I found from Adobe's site that this version supports D7100 raw image imports. But when trying to import D7100 raw images, I get a message that "the file is not recognized by the raw format support in LIghtroom."
View 6 Replies View RelatedWhy can't I preview or import images from my canon 5d mark III in lightroom 3?
View 3 Replies View RelatedI have been unable to import images into Lightroom 5.2 and 5.3 for the past several days. Worked fine before. There have been similar discussions on this topic, but none identical. When I try to import from a cf card, no images show up to import. In the import dialog, if I click on other source and navigate through directories on my hdd, all the images are greyed out. This is true even for images that are not in my catalog. I have tried creating a brand new catalog with the same results on import. I have deleted all the preferences files. I upgraded from 5.2 to 5.3 and that did not fix the problem. I do not have the original dmg for Lightroom so am unable to try a complete re-installation.
View 2 Replies View RelatedI have recently downloaded the latest Lightroom 4 update to my mac, which is Lightroom 4.3 and now I am unable to import any images into my catalogues.
View 6 Replies View RelatedI am now unable to import any Raw or jpegs images into Lightroom. I have un-installed Lightroom 4 and then re-installed Lightroom 5 and still no luck. When I hit import I get a message that says "Unble to import a file to the requested location"
View 1 Replies View RelatedI have Lightroom 3 and I am unable to import my raw images from my Canon 60 D. What do I need to do to fix this?
View 1 Replies View RelatedI have been importing and editing photos from a Canon Powershot S3-IS and never had a problem until today. This is the first time I've tried it with the latest upgrade to lightroom.
I first tried importing from my camera memory card slot. Lightroom froze. Then I tried using my card reader and inserting that in the USB slot. Lightroom froze. I tried to connect the camera directly to the computer with the USB cord. Lightroom told me that it could not import the files.
I tried importing the images to my computer and then from my hard drive copying them into Lightroom. That worked. Is the camera too old to use with the latest update from Lightroom. I would think a jpg. file would be pretty standard. how to import to Lightroom without the extra step?
Unable to import raw images from canon 40D into LR 4. using mac OS 10.7.3??
View 17 Replies View RelatedUnable to import Nikon D610 RAW images into Lightroom 5.2. Will an update be issued and if so when?
View 7 Replies View RelatedUnable to import previously imported images. Don't import duplicates NOT ticked.
All the images are "greyed" out, any new images I add to this folder have a tick as normal. I have LR on another PC and all is OK when I try this.
I am a Canon shooter and a seasoned Lightroom user. About a month ago my Mac stopped allowing me to import images from my CF card into Lightroom. I have worked with Mac and Adobe to no avail. At this point I know that my Mac can see the card and will me allow me to download images into iPhoto. It will generate thumbnails in Lightroom, but will tell me that it's unable to read the images when I try a complete import. If I switch users on my Mac to a dummy user, I am able to import the same images off my CF card. I didn't changed any settings, at least not intentionally.
View 16 Replies View RelatedPreview works, but no Import from any SD or CF and even HD! Try internal and external card readers and create a new catalogue, no results. All files from cards or transfered to HD will open properly in PS!
LR 5.3; CR 8.3; PS 14.2
I heard many good things about Gimp so I downloaded it, eager to begin editing my photos. But for the last 30 minutes, I have been unable to even upload an image to begin editing. I've tried everything, but no matter what, my images will not "drag and drop" like they're supposed to. I am getting more and more frustrated by the second. I read it might be the fact that it's a "jpg" file,so I tried renaming it, as suggested, still, no luck! I'm using a Mac Os X 10.6.8
View 1 Replies View RelatedI'm not able to import my Raw files from my new Canon G10 camera. Is this an issue that Adobe has plans to rectify and if so how soon?
View 1 Replies View RelatedI am unable to import my images to my new computer that I reinstalled elements 9 to. My computer is an HP 64 bit running windows 7.
View 10 Replies View RelatedLr 4.3 ACR 7.3 - unable to view preview files in the import window and/or raw files in the Library?
When will this camera be supported?
I am unable to import raw files to E11 from my Panasonic Lumix 200. I get a response that says "nothing imported - no supportive file types" also "can't complete request as file appears to be from a camera model which is not supported by installed version of Camera raw". I think I understand that I need at least a 7.2 version and don't know what I have. The camera is a fairly recent model.
View 6 Replies View RelatedElements 8 does not recognise an SD card with photographs to import. Is it short of a Plugin. If so, how do I get it?
View 7 Replies View RelatedI cannot import files from an epson scanner V750 pro. The screen reads unable to read preview. I am scanning B/W negatives using 16 bit Grayscale and tiff image format?
View 2 Replies View RelatedI'm a new LR5 user,When you create a new LR Catalog (whether images are stored local or on a NAS) LR also creates a '...Previews.lrdata' file. I think for storing the previews of the images in the corresponding Catalog file for fast(er) searching in Library mode.But when you open that catalog (and in Library mode) it looks/seems like LR is not using these previews at all. Sometimes it can take a lot of time when LR has updated (?) all image previews, especially when the originals are stored on a NAS. It looks like LR is rebuilding all previews.
Is this common, or is it some setting in LR to use or rebuild the (previously) generated previews.And does creating Smart Previews have any effect on this?
Why do I get the message "can't preview image" after importing photos from my camera into LR 5?
View 1 Replies View RelatedWhen I try to import images to LR3 on my new iMac I do not see any Preview images. Also in the import panel all I can see are the Folders or in case of a Card .. the name of the Card
No Preview images appear .. when I press the import button ALL of the images in a folder on an external hard drive are imported .. They appear as they Import
before I upgrade to LR4 I really want to resolve this issue. I have seen on other posting how a similar issue has been resolved on PC/Windows .
When I import images I cannot see them in the previews. I have set 1:1, standard, and minimal but it makes no difference. The images show as grey in the preview. When I go to the develop modual I can see the image I select but if I select another image the first goes gray again. For some reason I cannot render previews. Have I turned something off or on? Can I render previews after importing images? The files show up as DNG in my hard drive.
View 3 Replies View RelatedIf I import the files from the camera disk directly into LR4, I sometimes get vertical streaks on the preview images.
Yet if I go to develop mode, the picture loses its streaks by merely entering and exiting crop mode without changing the image size.
If I import them from the pictures folder after they were imported through another program, I haven't had any issues. Go figure!
This issue occured shortly after update to 4.2, but not directly after. I am using windows 8.
The issue that occurs is after importing images they are adjusted automatically to develop module cross process 1. After dealing with this annoyance for a bit of time I realized that I can not even "RESET ALL" the images to delete the adjustment. In delving into other images that have been in my database for quite some time, I have tried to "RESET ALL", which resets images to CROSS PROCESS 1. I have never set import to automatically adjust.
I use print preview in Lightroom 4. I also print a lot of landscapes. When I hit print and go to print preview, all my images are turned on end which makes review difficult. Is there a way to view them as they should be, landscape. In Lightroom, everything is set to landscape and in the printer module, it is all set to landscape. Just in print preview, they are turned on end.
View 6 Replies View RelatedI just upgraded from LR3.6 to 4.0. When trying to import images the import module freezes for a few minutes and then displays the import screen. However, when selecting a source the program freezes again and eventually crashes.
I had the same issue when upgrading to 3.6 some time ago and then found that disabling some USB controllers solved the problem. This works for LR4 as well. As I don't need all USB connections this is a workable solution, however, disabling controllers should not be necessary to run a program.
System is an Acer Aspire 7811 64 bits w/ Intel i7, Win 7 Home Premium, 8 GB internal mem and no external drives.
I'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot? Maybe there is some flag I've got set incorrectly.
I have LR 4.3 and now 5. how to display and compare more than two images in same time, including 100% view. I can with "Together" or some word alike. (Ensemble in the French version), but I cannot zoom all images together at 100%. This is only possible in the "comparison" module but for only 2 images at a time…
View 3 Replies View RelatedHow can I display images that are not included in any collection (some filter or smart collection)? A smart collection with parameters "Collection - contains - empty field" does not work. Lightroom 5.
View 2 Replies View Related