Suddenly the pallete colors disappeared from my development session. I re-started all my computer and LR, but it doesn't appear in my screen. Is it necessary I reinstall LR?
View 2 RepliesThe colors of my cr2 files are wrong in the developement part of Lightroom. Dark pixel are turnes into blue ones, bright/white pixels are turned into red ones.
The problem does not occur if I only watch the pictures in the libary mode
My problem is, that photos are shown different in color between libary and development tool in Lightroom 3.6. The libary shows corrected color in photos, the development tool not.When I switch between libary and development tool sometimes, the development tool shows then the same colors.
View 2 Replies View RelatedLight Room 4.2 Crashes. I was setting up Light Room and accidently clickede on Development. The program then crashed. I shut the program down and tried to start it up several times with the same result.
View 1 Replies View RelatedI have a JPG file that I've created in Lightroom from a RAW file.
My computer has crashed at some point, and I lost everything, but I managed to save the original RAW file.
Is it possible to recover the development settings from the JPG file, in order to re-edit the orignal RAW file (so I could make changes right from where I left off)?
After importing to Lightroom and doing some developent changes, I decided to restart my whole Catalog. There are no XMP files for the changes I made, but surprisingly it shows after re-importing the images back into Lightroom (using "Add"), some files show as previously being edited, so now the original files (in split view) show as the last edit.
Is there any way to clear all changes made to revert back to a clean original file ?
I emailed a photo from my light room and all my development panels disappeared and will not come back. What do I do to get them to return?
View 2 Replies View RelatedI would like to be able to apply developement settings to an image and commit to them, so that the sliders would go back to zero and I can use them again.
I know I could export a develped image, then import it and continue developing this image at its intermediate stage.
But is there a way to actually render the selected dev. settings while remaining in the develop module so that I can carry on using the sliders all over again?
I have been using LR5.2 successfully for a few months now but all of a sudden I cannot see the basic settings in the Development Module. Specifically, I am not able to change Color Temperature, exposure, recovery, Clarity (very important to me), etc. I shoot RAW 100%, so I wonder if i accidentally hit some wrong key to make those basic features hidden?
View 2 Replies View RelatedAt home I still have the trial version (I wait for 4.2 to see if it will be much faster before buying it) and today I do some photo development at work (we also have 4.1 version).
What I'd like to know is it it's possible to import the processings settings of each photos to my own catalog ????
Here is how I did my work:
At home my raws are on an external USB drive and I import my pictures from this disk: path is I:Mes photos<subject + date of the photoshoot> My Lightroom catalog is in it's default path (user profile, my pictures).
At work, I put my photos on a temp director c:MyRawPictures and import them into lightroom.
Now how can I export the development settings from the lightroom at work and import them in my home setup ?
I saw a menu "import from another catalog". can I use this one ? If yes, do I need to copy the "Lightroom catalog" folder ?
When I import images no matter if RAW or JPG, when I go to the development module all images have various modifications on all slidedrs from exposure to saturation. I haven't changed any settings or global settings but each slider will already be modified. Previously when importing images all sliders were set to ZERO, but now all of those sliders are anywhere from - to + modification.
LR 4.2, Windows 7 64-bit, 24GB ram, Catalog has been optimized, Develop Settings and Metadata setting are set to none on import.
I run Lightroom 4.2 under Windows 7. All went well until this morning the development module showed a greyed out screen and LR stopped working. All other modules seem to work well. I tried a reinstallation but that doesn't work, nor does a return to 4.0 work.
View 1 Replies View RelatedI have LR4.3 for at least one year. He has worked correctly until 2 weeks ago. But now it is impossible to have correct color in the "development " part.
When i choose the pictures in the computer to load them, their colors are "normal" but after to have loaded them, The pictures are red, blue, green, yellowl etc without gradient (like solarization) Even if the picture loaded is in B&W.
And the "histogram" has the same colors.
When i decide to send these pictures to the computer, their colors are again "normal" (with the changes I have done) but without be able to control them during their passage in LR4.3.
Original picture:
The same in LR4.3
I'm been humming along just fine in Lightroom 5 until this morning. I might explain that I have been using an old iMac. The speeds been killing me so I decided to use my new MacBook Pro and get a display with it. So this weekend I set up the MacBook Pro with LR presets etc. I use an exteral HD for my photos. Since that drive was getting pretty full. I purchased a new one and copied my photos to it. In LR on the MacBook Pro, I clicked "find my photo" and it did. After that I did some editing and exporting. This morning, I couldn't export or edit in the development module. I still have my old iMac installed and I noticed I can't export from it either. Not sure what I need to do to use it.
View 3 Replies View RelatedThis is pretty weird. Brand new .lrcat, working through a few family pictures. The first few photos, the adjustment brush was working. A few minutes into it, it stopped working, or at least stopped having nearly as substantial an effect. If I push exposure by +4, it looks as if it's pushing it by .4. Same with other sliders - they are barely applied.
Did I hit some button that globally diminishes the brush strength or something?
Note that, in the second image, the adjustment brush is centered on his head. It's a little different than the first image, but certainly not to the extent one would expect from the sliders pushed to their extremes.
Just for a point of trivia, I installed QuickTime while working in LR. Not sure if that has anything to do with it, but restarting LR and creating a new catalog did not remedy the problem.
I used to be able to select all photo's in the development module and then apply a preset (i.e. sharpen for faces) and it would apply to all photo's, a mass edit would occur. Now when I select all and add a preset, it only applies to the photo being viewed at that time, i can no longer do mass edits in this manner. Is there a setting I am missing which allows mass editing in Development module? I am using Lightroom 5 for Mac. I edit 100's of photo's at once, and I like to add sharpening to all at the end rather than clicking each one at a time.
View 1 Replies View RelatedHow could I share development progress with multiple devices? I would like to share the library on the desktop and notebook. According to faq it's not possible to put library on a network ( I have a nas), but this would be the best solution!
View 4 Replies View RelatedI was eventually able to download Lightroom 5 after paying for it twice, It took over 2 hours on online chat for them to release a code to activate the download. Now that I have it i am working on a class project that's due on Monday . I was in the process of making adjustment in the Development module when it suddenly disappeared. What can I do to get it back up? I looked under "Tools" and Efit biut cannot activete any of the features that I need to work on these photos.
View 2 Replies View RelatedI have moved the library folder in OSX and then tried to start lightroom again pointing it to the new library location. Afterwards all Previews were replaced by grey squares (with color curves showing on the right, stars etc. but no image). It looks like the previews are not created but all the information are there
why when moving to the Developer rider, the Photos appear and i can work on it again. Thereafter it also appears again in the previews. S
Tried to optimize library but after 6 days of process ongoing i stopped with no changes at all to the library. Have about 60k photos in the library.I have tried the monitor settings but that makes no difference.This also happens with newly imported pictures,the ones that were appearing clearly in the library are grey at the next start of the project.running lightroom 5 with imac and latest osx.
In LR you can set the left and right panels, in the development module, to solo mode, and I think nearly everyone does. My problem is that I lose the mode each time I leave LR and have to reset it each time I enter LR. Normally the panel’s stays in solo mode and in previous versions have. I’ve been using LR since the public beta way back in 12/2006.
Why my LR doesn’t stay in solo mode or how I can get it to stay in solo mode?
I am changing computers, how I can move the development info with my master files?
View 1 Replies View RelatedWhat happens? I can't type.
View 9 Replies View RelatedLR 4.3, 59th reinstall (i lost count), standard HP pc setup, triple-core.
workflow: i develop the master to the point where i want to diverge, then create a virtual copy, finish developing and publish to hard drive. Have done this a million times, but since most recent reinstall (for a plethora of reasons, but mostly difficulties with performance and performance - and oh! performance... ;-), it publishes only the undeveloped original. I've tried publishing the master, just to see what happens, and ditto: only the unedited raw file is displaying in my published folder on the hard-drive.
i am careful to select 'Show PUBLISHED folder on hard-drive' from the right-click drop-down on the published image in the hard-drive publishing module, which in lightroom DOES reflect all changes, but the image on the hard-drive is the original raw file, renamed to the publish-service's specs.
Having to do an extra export into ps6 (which does reflect changes), and re-save for no other reason than to preserve development is time-consuming and destructive to my workflow, which is darned complicated enough as it is!
I tested yesterday creating a video using "same as first video". All inserted files were AVCHD. The created video file, typed mpg, was missing audio no matter what I tried: tried mp4, avi, etc. I then turned off Smart Render in the options that pop-up when creating the video and it worked ( I have Smart Render turned off in the Preferences, BTW). This appears to be a bug or am I doing something wrong? In any case I am happy with this "work-around" Al
View 6 Replies View RelatedI would like to be able to save my session in Photoshop much like I can with the workspace.
With a session manager, I will be able to save and load all the open canvases in one go.
So, for instance, if I wanted to continue my work next time I open Photoshop, I will be able to load the previous session -- this will open all the canvas windows and their exact placement in the main Photoshop window.
How can I accomplish this? Are the scripts advanced enough to implement new menu's and trigger such actions (maybe I am being too hopeful, here)?
With functionality, an intuitive design, and ease of use being some of the top priorities in applications these days, I am hopeful that Adobe can at least implement this next time around.
Perhaps I am just missing the option? Is such a feature available?
I've seen (some times ago) a presentation where the editor was initially working in Camera Raw with a new (original) foto. During the modifications in Photoshop he went back to Camera Raw, edited some parameter settings, went back to Photoshop. He made this switching between Photoshop and Camera Raw a few times.
Which command has been used for this switch?
I was working on a project and all of a sudden everything with in PS got notably slow and choppy. This first happened while using the selection tool (polygonal lasso), which was lagging behind and making late clicks. I finished my selection and noticed the cursor in general was slow choppy still. I saved my work, shutdown PS, then reboot my computer. I reopen my project, the cursor lag seemed to be gone but the brush tool was not working correctly. Instead of making smooth burst of color with one click (gradient like), it now looks like 256 4 bit (old nintendo style) bursts. Or you could say it looks like multiple rings getting smaller and darker, like counting the rings of a tree trunk.
This happens instantly after opening a file of any type and size. I work with CMYK and 300dpi and while working on a page, this just happened out of nowhere.
I have an ASUS G74SX, i7 CPU, GeForce 560M w/2 gig RAM, 8 gig of SDRAM, 3 each SSD 300gigs (this is basically a 6 month old gaming laptop and has been working fine with PS until now). I have my PS scratch disk set to my F drive for all art and there is nothing more than 2 gigs of space being used right now. My RAM used in PS prefs was maxed at 5205k as suggested by the program.
PS CS6 is fully up to date as well as all drivers for my GPU and the rest of my laptop.
Using Inventor 2013. As you know it's impossible to chang iproperties values of the library parts in inventor session (for instance in asm file). The error message comes "readonly".
But when you open iproperties of the file in windows file explorer then it's possible to change iproperties values while library parts open in inventor session in asm.
Normally I copy the file location path of the library part and open this path in the windows file explorer and find the part and right-click on file and change iproperties values which I want to change stock number, part description etc...
Is it possible to create VBA code or API which can open iproperties box of the selectet part outside of the inventor session in windows file explorer?
I loaded the photos into Iview Media Pro and forgot to save them as well as not saving to a CD or External hard drive. I cannot retrieve the photo on the cards. Is there any way to improve the quality of thumbnails in Iview to be able to be usable?
View 5 Replies View RelatedI thought that I had saved some photos on my hard drive. I the did load the photos into Iview Media Pro so I do have the thumbnails. Is there anyway to improve the file to a usable size?
View 1 Replies View RelatedIs it possible to split your inventor session in 2 screens?
Without having to use 2 sessions ofc.