Lightroom :: Mass Editing In Development Module Is Not Working?
Jul 28, 2013
I used to be able to select all photo's in the development module and then apply a preset (i.e. sharpen for faces) and it would apply to all photo's, a mass edit would occur. Now when I select all and add a preset, it only applies to the photo being viewed at that time, i can no longer do mass edits in this manner. Is there a setting I am missing which allows mass editing in Development module? I am using Lightroom 5 for Mac. I edit 100's of photo's at once, and I like to add sharpening to all at the end rather than clicking each one at a time.
View 1 Replies
ADVERTISEMENT
Nov 24, 2013
I have been using LR5.2 successfully for a few months now but all of a sudden I cannot see the basic settings in the Development Module. Specifically, I am not able to change Color Temperature, exposure, recovery, Clarity (very important to me), etc. I shoot RAW 100%, so I wonder if i accidentally hit some wrong key to make those basic features hidden?
View 2 Replies
View Related
Oct 18, 2012
I run Lightroom 4.2 under Windows 7. All went well until this morning the development module showed a greyed out screen and LR stopped working. All other modules seem to work well. I tried a reinstallation but that doesn't work, nor does a return to 4.0 work.
View 1 Replies
View Related
Dec 7, 2013
I was eventually able to download Lightroom 5 after paying for it twice, It took over 2 hours on online chat for them to release a code to activate the download. Now that I have it i am working on a class project that's due on Monday . I was in the process of making adjustment in the Development module when it suddenly disappeared. What can I do to get it back up? I looked under "Tools" and Efit biut cannot activete any of the features that I need to work on these photos.
View 2 Replies
View Related
Jan 21, 2013
In LR you can set the left and right panels, in the development module, to solo mode, and I think nearly everyone does. My problem is that I lose the mode each time I leave LR and have to reset it each time I enter LR. Normally the panel’s stays in solo mode and in previous versions have. I’ve been using LR since the public beta way back in 12/2006.
Why my LR doesn’t stay in solo mode or how I can get it to stay in solo mode?
View 2 Replies
View Related
Jul 19, 2012
I saw a video about customizing a layout in the book module. I need to replicate a layout used for story boards. see attached. I found some pages that have a grid of photos. Is there any way to start from scratch or edit a multi photo page? I'd like the text elements as well. This would be an amazing time saver in preparing a story board book.
View 6 Replies
View Related
Feb 28, 2014
My develop module is not fully opening. The only items it is allowing me to edit is lens profile correction, vignetting. How to restore the full develop module starting with temperature, contrast, blacks, whites, shadows, etc., all the way down the whole module.
View 1 Replies
View Related
Mar 29, 2014
in the Develop module my adjustment brush is not working, all the other sliders work, what is wrong?
View 27 Replies
View Related
Aug 8, 2013
Started with LR5 CS6 CR8.1
Suddenly when a raw image has been porcessed by the Develop Module the (ctrl-E) 'open in Photoshop' command does not work for that image. It works for images that have not been 'developed'.
I have deleted LR preferences several times.
I have upgraded to LR5.2RC and CR8.2RC.
As far as I remember this catalog was new as LR5.
View 2 Replies
View Related
Mar 30, 2006
I have over 500 pictures which i want to modify, all of them need a few filters applied, is there like a macro or something that i can do this with? i dont wan to modify each one and save it one by one.
Im using PS7
View 2 Replies
View Related
Feb 14, 2013
I have a relatively simple mass modeled in Rhino that I imported to a Revit Mass Family (via .sat file). I then placed walls, roofs, structure on the face of this mass. However I would like to be able adjust this mass, either in Rhino or Revit and the walls and structure adjust accordingly. Now however, if I reload the mass into my Revit family, and then reload the family to my model, and then attempt to Update to Face, the error "Faces defining this Element cannot be reacquired." and my only option is to delete the offending wall/roof etc.
Is this just a limitation in Revit/Rhino, or am I totally doing it wrong?
View 9 Replies
View Related
Mar 9, 2005
I've got about 1000 ten-to-twelve word "sayings" that basically need to go on index cards. I have all these sayings neatly organized in Excel.
all 1000 need to end up as a 4"x6" image.
Do I have to manually create a text layer, and cut and paste all 1000 sayings into it, one by one, saving the file each time?
View 2 Replies
View Related
Nov 9, 2012
Light Room 4.2 Crashes. I was setting up Light Room and accidently clickede on Development. The program then crashed. I shut the program down and tried to start it up several times with the same result.
View 1 Replies
View Related
Dec 21, 2013
I have a JPG file that I've created in Lightroom from a RAW file.
My computer has crashed at some point, and I lost everything, but I managed to save the original RAW file.
Is it possible to recover the development settings from the JPG file, in order to re-edit the orignal RAW file (so I could make changes right from where I left off)?
View 23 Replies
View Related
Aug 26, 2013
After importing to Lightroom and doing some developent changes, I decided to restart my whole Catalog. There are no XMP files for the changes I made, but surprisingly it shows after re-importing the images back into Lightroom (using "Add"), some files show as previously being edited, so now the original files (in split view) show as the last edit.
Is there any way to clear all changes made to revert back to a clean original file ?
View 10 Replies
View Related
Jul 2, 2013
The colors of my cr2 files are wrong in the developement part of Lightroom. Dark pixel are turnes into blue ones, bright/white pixels are turned into red ones.
The problem does not occur if I only watch the pictures in the libary mode
View 1 Replies
View Related
Nov 28, 2013
For some reason images in the library module aren’t as sharp compared to the develop module. If I’m in develop images are nice and sharp but as soon as I select the library you can see the image quality drop and image becomes less blurry!
View 4 Replies
View Related
Feb 7, 2014
Sharpening applied in develop module is not shown when switching back to library module. It looks the problem occurs when having size to "FIT". With 1:1 there seams to be no issue. Export also looks fine in 1:1.
I use Mac 10.9.1, LR5.3, Nikon NEF 24Mbit from D600.
I hope this is a way to get support from Adobe.
View 18 Replies
View Related
May 19, 2012
I emailed a photo from my light room and all my development panels disappeared and will not come back. What do I do to get them to return?
View 2 Replies
View Related
Nov 5, 2012
I would like to be able to apply developement settings to an image and commit to them, so that the sliders would go back to zero and I can use them again.
I know I could export a develped image, then import it and continue developing this image at its intermediate stage.
But is there a way to actually render the selected dev. settings while remaining in the develop module so that I can carry on using the sliders all over again?
View 2 Replies
View Related
Oct 1, 2012
At home I still have the trial version (I wait for 4.2 to see if it will be much faster before buying it) and today I do some photo development at work (we also have 4.1 version).
What I'd like to know is it it's possible to import the processings settings of each photos to my own catalog ????
Here is how I did my work:
At home my raws are on an external USB drive and I import my pictures from this disk: path is I:Mes photos<subject + date of the photoshoot> My Lightroom catalog is in it's default path (user profile, my pictures).
At work, I put my photos on a temp director c:MyRawPictures and import them into lightroom.
Now how can I export the development settings from the lightroom at work and import them in my home setup ?
I saw a menu "import from another catalog". can I use this one ? If yes, do I need to copy the "Lightroom catalog" folder ?
View 1 Replies
View Related
Nov 9, 2012
When I import images no matter if RAW or JPG, when I go to the development module all images have various modifications on all slidedrs from exposure to saturation. I haven't changed any settings or global settings but each slider will already be modified. Previously when importing images all sliders were set to ZERO, but now all of those sliders are anywhere from - to + modification.
LR 4.2, Windows 7 64-bit, 24GB ram, Catalog has been optimized, Develop Settings and Metadata setting are set to none on import.
View 2 Replies
View Related
Mar 21, 2013
I have LR4.3 for at least one year. He has worked correctly until 2 weeks ago. But now it is impossible to have correct color in the "development " part.
When i choose the pictures in the computer to load them, their colors are "normal" but after to have loaded them, The pictures are red, blue, green, yellowl etc without gradient (like solarization) Even if the picture loaded is in B&W.
And the "histogram" has the same colors.
When i decide to send these pictures to the computer, their colors are again "normal" (with the changes I have done) but without be able to control them during their passage in LR4.3.
Original picture:
The same in LR4.3
View 4 Replies
View Related
Jul 1, 2013
I'm been humming along just fine in Lightroom 5 until this morning. I might explain that I have been using an old iMac. The speeds been killing me so I decided to use my new MacBook Pro and get a display with it. So this weekend I set up the MacBook Pro with LR presets etc. I use an exteral HD for my photos. Since that drive was getting pretty full. I purchased a new one and copied my photos to it. In LR on the MacBook Pro, I clicked "find my photo" and it did. After that I did some editing and exporting. This morning, I couldn't export or edit in the development module. I still have my old iMac installed and I noticed I can't export from it either. Not sure what I need to do to use it.
View 3 Replies
View Related
Jan 26, 2013
I am running LR4 ver4.3. All of a sudden I receied an error message stating cannnot switch to module. I have tried all the usual stuff before going out to the web to look for fixes. On adobe's site they recommended 6 things which I did exactly as instructed and still nothing..I am running iMac mountain lion and everything on my computer is up to date.
View 1 Replies
View Related
Sep 14, 2012
After making changes to an image (sharpening, exposure, contrast, etc, etc) in the develop module, when I head over to the library module, the image does not show the latest changes. What's worse is when I export a JPG of the image, it exports the original! What's the point in having LR?
View 1 Replies
View Related
Feb 9, 2012
My problem is, that photos are shown different in color between libary and development tool in Lightroom 3.6. The libary shows corrected color in photos, the development tool not.When I switch between libary and development tool sometimes, the development tool shows then the same colors.
View 2 Replies
View Related
Jan 10, 2014
How could I share development progress with multiple devices? I would like to share the library on the desktop and notebook. According to faq it's not possible to put library on a network ( I have a nas), but this would be the best solution!
View 4 Replies
View Related
Feb 17, 2013
Suddenly the pallete colors disappeared from my development session. I re-started all my computer and LR, but it doesn't appear in my screen. Is it necessary I reinstall LR?
View 2 Replies
View Related
Dec 8, 2011
When I move photos from the develop module to the web module they get a garish/reddish look . I want the photos in slide shows to look like they do in the Develop module. How do I do that?
View 1 Replies
View Related
Sep 21, 2013
I have moved the library folder in OSX and then tried to start lightroom again pointing it to the new library location. Afterwards all Previews were replaced by grey squares (with color curves showing on the right, stars etc. but no image). It looks like the previews are not created but all the information are there
why when moving to the Developer rider, the Photos appear and i can work on it again. Thereafter it also appears again in the previews. S
Tried to optimize library but after 6 days of process ongoing i stopped with no changes at all to the library. Have about 60k photos in the library.I have tried the monitor settings but that makes no difference.This also happens with newly imported pictures,the ones that were appearing clearly in the library are grey at the next start of the project.running lightroom 5 with imac and latest osx.
View 6 Replies
View Related
