My L 4 Library suddenly shows only the first thumbnail in a catalog. All the rest of the thumbnail windows are grey. Only thr last import sghows the full catalog.
View 3 RepliesWhy can't Windows Explorer show thumbnail previews of DNG's on my Windows 8.1 64bit Pc. I assume is has something to do with not having the DNG codec. However, on Adobe's website it says their DNG codec only works on Windows 7.
View 4 Replies View RelatedI have seen a problem like this before, and raised a question on the forum, but realised what was wrong (the problem happened on a full colour image, and once I set the Process to 2012 it went away). However it has cropped up again, and this time the image was imported directly into LR4 so Process was 2012 by default.
I have an image which is a glass with liquid in against a black background. I have made a few tweaks in LR and am ready to send it off for printing. I just though I would take a look in Soft Proofing to see how the coloured liquid looked. When I click soft proofing and choose the correct profile supplied by my printing company (which is a 'glossy' profile), the black takes on a milky grey appearance, but according to LR is not out of Gamut.
If I choose the matt profile from my printing company, the same effect is there, but less so.
I rather think that this is quirk of softproofing black, what with black not actually being a colour and all that. Since there are no gamut warnings, and I have never had a problem with printed images on a black background, then I think I should ignore this. It does give a rather mis-leading impression though.
I am looking at my thumbnails in Library mode. How to I determine which was the last image I edited?
I edit my images in sequence. Often I need to leave a particular set of images to work soemwhere else in LR. On returning I need to easily see which was the last image I edited so I can continue in the sequence. At the moment I go into develop mode and check in the history. That though is a long way round.
The label for Library, i.e. the word 'Library', no longer shows in the line of module labels along the top panel of my Lightroom 4 window; all the others from Develop to Web are still there. I see they're called Module Picker Buttons (Menu - Lightroom - Identity Plate Setup..). I've just downloaded Lightroom version 4.4 but that hasn't triggered the reappearance of 'Library'. So I now have to use alt-cmd-1 to access the Library module. retrieve 'Library' for the top panel? Have I unknowingly made a keystroke that disabled it? I'm running Lightroom 4.4 on Mac OS 10.6.8.
View 2 Replies View RelatedMy problem is, that photos are shown different in color between libary and development tool in Lightroom 3.6. The libary shows corrected color in photos, the development tool not.When I switch between libary and development tool sometimes, the development tool shows then the same colors.
View 2 Replies View RelatedI run a HP DV6 Laptop with Core I7 and Windows 7. While editing my photos my computer appeared to over heat (which is a recurring issue that I'm working to resolve) during mid-post production. Upon restarting my computer, and when I accessed the same photos, I got a very lengthy loading icon when I clicked on a photo under the "Develop" tab. This problem recurred and in attempt to resolve the problem I decided to delete the library and re-import the files. Upon re-import, I cannot view all the photos in the library grid view. I'm not sure if my files are now corrupt from the sudden crash or is it just a data issue with LR?
I've attached a screen shot of what the problem library looks like...
RAW files (Red) no longer show their filenames in the Library Grid Compact Cells view (now just shows numbers)!
JPGs (Green & Blue) show nothing at all, including ratings and Pick status, and the Develops are gone.
This was after having imported a LR3.6 catalog and intermittently using it for a month.
Data:
- Catalog is over 1GB in size, over 50,000 images in the Library
- Windows 7 x64 with SP1
- LR4.0 x64
I have not yet tried:
- Re-importing the LR3 Catalog backup to see what happens.
- Creating a new LR4 Catalog and see if it displays the data in the Grid Compact Cells view
I have tried:
- Optimizing/Integrity Testing the Catalog
Is there a way to add text (names or locations)so it shows on a photo from the library or develop module? I know you can add text in the slidshow module or when exporting, but it would be faster in the library/develop module.
View 2 Replies View RelatedI thought I had this figured out but it appears to occur somewhat randomly. Since upgrading to Windows 8 when I export files that I have imported from Canon raw .CR2 for some files it gives an error that "the file could not be written" and lists the original source .CR2 file name. It does not do it everytime but once it happens it happens everytime for that file. When exporting 10 JPG files for example only 3 of them may have this issue. The file still exports and creates the JPG file and the only issue with the exported file appears to be that it did not create the preview thumbnail.
I have tried importing the files into new catalogs, writing to different folders etc but it still happens.
instead of showing the thumbnail of an image in my layers panel, I got a grey box for any layer that is in there. Normally I would see a mini-version of the graphic that I am editing.
Is this something that I did or touched that made this happen, if so, how do I reverse this?
Since today i've gotten some problems with CS6..When i import an NEF file into photoshop some photo's suddenly get some black area's.On bridge or Gimp the photo's are how they should be... but in photoshop i'm getting this:
If i change the channel mode from 8bit to 32bit it looks just fine... but i cant edit anything..It will probably be an setting i've missed or something.. but i'm really stuck, i cant finish my pictures in photoshop!
Video drivers are up to date.
Mode =rgb color - 8bit
I am considering moving to Adobe lightroom. Currently we have all our photos in iPhoto.My wife prefers to use Windows, but I like Mac. I have setup my iMac as dual boot and I will by an external SSD HD to hold all our photos and can be accessed by both mac and windows. Is it possible to be able to use Windows to work in Lightroom, and the next day boot into Mac and see the same library? And when I make changes, add photos etc in Lightroom, they are visable in Windows?
View 1 Replies View RelatedI recently had to get a new computer and reinstall Photoshop, I also did the update. Now when I use my color picker outside of Photoshop, it only pulls up a grey color, not the actual color I am sampling.
It works fine within the Photoshop document but now when sampling outside of it. Was this the update that messed up this functionality? Or is there a setting I need to set. All my preferences are the same from my old to my new computer.
I'm using .AI CS6. I am trying to type something and the font color is set to black. But only shows up grey. But all other colors work fine. Document color is set to RGB, not CMYK, or Greyscale. I'm totally at a loss... My customer is needing this tomorrow. So a really fast correct reponse would be FANTASTIC. Been woring on this artboard for a little over an hour and can't do what I need done. I open new Artboards and the same problem persists..
View 2 Replies View RelatedWhen I produce a MP4 video file in X4 it shows a thumbnail in the video file. I cannot figure out where this image comes from. It seems sometime to be the first video image from all tracks, but sometimes it is just the upper video track and sometimes it is a picture from a later point of the video. How does it work? And how can I control which image is used?
View 3 Replies View RelatedIn Microsoft windows 7 Ultimate 64 Bit when PDF is created in Coreldraw X6 64 bit PDF Icon dont shows Thumbnail on Desktop. I can see the thumbnails from other's PDF
View 2 Replies View RelatedThe Organizer thumbnails is showing broken images for some pictures, but when I look at the pictures using Windows Explorer or any other photo editing program, they are fine. I've already tried right-clicking the image and clicking "Update Thumbnail". How can I fix the thumbnails?
Adobe Photoshop Elements 11.0.0.0
Very new with this software...watched several videos, and I'm still confused. Went to send some pics to a friend last night, and noticed that many "folders" are not in the pictures library in Windows 7.
In LR4, some folders have a destination of C://users/eric and brenda/windows/pictures...which is great, but others have this destination C://Brandon(which is just the folder name).
how can I get the folders in the Windows Library?
I've got some insulation that is colored white and no matter what white I use or alter the views still show grey. 2011 didn't have this problem as white-flat looked white on screen.
View 1 Replies View RelatedA big bummer that in the library grid mode (or any other scrollable part of lightroom) I can't scroll with my touchscreen monitor like I can in IE or Chrome or Word etc.?? What is touchscreen compatible in lightroom? I would love for lightroom to be touchscreen friendly.
View 4 Replies View RelatedI am trying to select a song for a slide show. The song is in the library of Windows Media Player. When I am in LR Slideshow I click on "select music" The Select Music window does not show the Windows Media Player.
This is on a PC laptop with Window Vista Home.
How can I get to the library in the Windows Media Player to select a song?
The Thumbnail in the media library are not useable. They need to be larger. I know the desktop is also an option, but for quick scanning, they don't serve there purpose.
View 3 Replies View Relatedon WinXp and i think Max 8, you used to be able to see a max file as a thumbnail in windows. This meant if you wanted to merge a character, for instance, you didn't have to click though 50 files whilst looking at the preview window, you just viewed the folder by thumbnail and quickly grabbed the right file.
After going to max 9 (again, not too sure on versions) and vista we lost that ability, I posted around at the time but found no solutions.
So, I'm on windows 7 64 bit now and Max 2011 and was curious if this feature was ever fixed or even addressed/dismissed formally by Autodesk?
there, after the upgrade to 3d max 2012, we have a problem. The Thumbnail view on Explore is little strange.
See the attachments before and after.
Is there a way to set Windows Explorer viewing options so that when viewing files in Windows Explorer in the "Thumbnail view", you see the thumbnail of the PSD file rather than the generic/default PSD icon?
View 5 Replies View Relatedthe "icon" and "windows thumbnail" settings are missing from the File Handling Preferences in photoshop cs6 windows version.
View 5 Replies View RelatedI would like to see the drawing preview for the drawing in windows explorer. Just as if I have AutoCAD open and can see the preview for the drawing but I want to see this in Windows Explorer instead, if this is possible or not? windows explorer to show the big preview on right side showing only dwg file icon.
View 1 Replies View RelatedThe thumbnail preview does not show up in windows browser. We use Windows 7 prof. and Acad 2012.
View 3 Replies View RelatedI am using AutoCAD 2011 and am not getting my AutoCAD files thumbnail preview in windows explorer. I did reinstalled it but no use. All other programs like PDF, MS office files are showing thier preview but AutoCAD don't.
View 1 Replies View Relatedafter upgrading to version 14.1 CC, Photoshop shows several CMD windows during load. It stops on the third one, showing this:
Finally, a pop-up error windows says clc.exe stopped working (you can see that on the photo). I'm running on Windows 7, 64 bit.
The crash message reports this:
Firma con problemas:
Nombre del evento de problema: APPCRASH
Nombre de la aplicación: clc.exe
Versión de la aplicación: 0.0.0.0
Marca de tiempo de la aplicación: 4c5cc9f6
Nombre del módulo con errores: clc.exe
Versión del módulo con errores: 0.0.0.0
Marca de tiempo del módulo con errores: 4c5cc9f6
Código de excepción: c0000005
Desplazamiento de excepción: 000000000000a620
Versión del sistema operativo: 6.1.7601.2.1.0.768.3
Id. de configuración regional: 2058
Información adicional 1: e945
Información adicional 2: e9453ece61423ab98d0ee5bd40bdd8d2
Información adicional 3: be9a
Información adicional 4: be9a4f994c98c3a8aa1b5294bf419e15
Everything worked just fine before the update. Problems started right after upgrading.