Photoshop :: CS6 Suddenly Shows Black Spots?
Jun 2, 2013
Since today i've gotten some problems with CS6..When i import an NEF file into photoshop some photo's suddenly get some black area's.On bridge or Gimp the photo's are how they should be... but in photoshop i'm getting this:
If i change the channel mode from 8bit to 32bit it looks just fine... but i cant edit anything..It will probably be an setting i've missed or something.. but i'm really stuck, i cant finish my pictures in photoshop!
Video drivers are up to date.
Mode =rgb color - 8bit
View 3 Replies
ADVERTISEMENT
Jun 18, 2005
I have a ~8.1MP image that I want to get printed on a pretty large scale. However, there are a few spots on the image that I am going to need to remove.
(Picture file here.)
There are 4 large black spots (circled) that I am sure should not be there. I am pretty sure they were smudges on the camera lens, because I have the entire set of images that was shot in this same jump, and those 4 spots are in the same place in all of them.
However, there are also a lot of white-ish spots scattered about the upper half of the image that seem to be mainly near the ends of the "sun-star effect" (which is one of the coolest parts of this picture, IMO). They don't seem to be present in the other pictures from the set, but perhaps they are also lens smudges and only show up in this one because there is such bright light hitting the lens, making them noticeable.
Are the white spots part of the attractive sun-star and should stay?
Are they smudges on the lens and should go?
Are they part of the sun-star but should go regardless because they don't look good?
Does the sun-star even look good or am I crazy?
Bonus question #1 - Are the red, yellow, and blue "hexagons" (noob terminology here) attractive? I kind of like them, but what do photo pros think of these things? Lens flares, they're called, right?
Bonus question #2 - Should I make the image brighter, so more color in the jumpers and their suits can be seen? Or should it remain this dark, since it is in fact a silhouette?
Before I spend the $25 to make a poster-sized print for my wall, I want to make sure I get the image looking good. The 4 black spots, I think I could probably remove without too much hassle (limited Photoshop skills here). But the white spots would be harder I think... for one thing there are many of them, and for another they occupy the same space as the sun-star, which I don't want to screw up.
View 7 Replies
View Related
Jun 8, 2009
I have thousands scans of text (greyscale TIFFs on white background) that need cleaning up. Each scan has tiny black spots throughout the page, which cause unacceptably "dirty" prints. The only method I know is to select areas between text manually and hit the delete key - which takes about 30 mins per page! There must be a way to select an entire page and remove black spots of a certain size in one hit.
View 8 Replies
View Related
Mar 14, 2013
I am having a huge issue with Photoshop CS5.5. The gradients and colors are acting crazy. When I bring in a image with a gradient it gets black spots all in the dark areas. Even when I use the default gradient selection this is what happens. When I bring in a picture that should have a white background it turns to black. Now apparently, when I save it out as a JPEG saves correctly without the black line or messed up gradients. So it seems to only be an issue when I am working in Photoshop, the gradients appear messed up. What is wrong with my display?
View 2 Replies
View Related
Jun 11, 2012
My L 4 Library suddenly shows only the first thumbnail in a catalog. All the rest of the thumbnail windows are grey. Only thr last import sghows the full catalog.
View 3 Replies
View Related
Mar 3, 2009
When using the adjustments brush to locally increase exposure(for example) it seems that not all pixels are covered. In the red display of the selected zone you can see black spots all over the zone that are not selected even after repeated use of the adjustment brush. The result looks like heavy noise and is pretty bad. I must say it gives the impression that it happens with "low light" pictures only!? Windows/XP3, Lightroom2.2
View 6 Replies
View Related
Feb 15, 2013
when i paint with the color #00a8ff It will come out has black It looks something like this!Also there's wierd artifacts i see in the color's like this. Look in the really dark blue u can see black pixels.
View 3 Replies
View Related
Dec 4, 2007
create a PNG that when overlayed on an image only shows when its on top of black.
ie the image underneath is black and in some spots there is color. Wherever there is black I would like the overlayed png to show. Wherever there is color I would like to the overlayed png to be transparent.
View 3 Replies
View Related
May 18, 2013
In Photoshops CS6 when applying an Iris blur the picture turns black. When I move the pins around I see the picture but this goes away as soon as no pin is moved.
This behaviour has been reported on other webpages before but there has been no solution and people think it is caused by a graphics driver bug. I have updated the latest Photoshop and system updates.
Here is some information about my system:
Mac OS X 10.8.3
MacBook Pro Retina, Mid 2012
NVIDIA GeForce GT 650M
Photoshop CS6
Here is the system information from the Phtoshop Info Panel:
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Betriebssystem: Mac OS 10.8.3
Systemarchitektur: Intel CPU-Familie:6, Modell:58, Stepping:9mit MMX, SSE (ganze Zahl), SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, Hyper-Threading
Physischer Prozessor: 4
[code]....
View 1 Replies
View Related
Sep 13, 2012
The image is basically a grayscale height map created from Digital Elevation Models, and exported out of another program as a 16bit tiff. I know photoshop can handle the idea of a 16bit image, but no matter what I do, these come out black. i've tried dumping it out as signed, unsigned, stretched, etc. I can't mess with things like contrast or brightness globally cause that will alter the values which have to stay the same.Basically it needs to open in photoshop cs5 as what it is and save off the same way.
I don't have any other way to do what I need to do to it other than photoshop, so if there is a way to make this work, and no, converting it to 8bit is not an option.
View 17 Replies
View Related
Jun 23, 2013
Whenever i open up a CR2 file in photshop the screen that pops up is meant to be grey but instead it shows up black with most of the txt showing, i can still use the sliders to fix the picture but it doesnt feel right
View 4 Replies
View Related
May 18, 2012
why my interior rendering scenes just show up black. I have opened up projects from previous releases that I was able to get interior scenes to render correctly and they render fine in 2013. I've imported the modified fixtures to the current projects file and they still don't do anything. The scene I'm talking about has a ceiling modeled on the underside of a floor. I've read this may be an issue, but my light fixtures light source is to be 1/4" above the plane of the ceiling. In my case, it's a 5/8" layer of drywall.
View 9 Replies
View Related
May 7, 2013
I'm using .AI CS6. I am trying to type something and the font color is set to black. But only shows up grey. But all other colors work fine. Document color is set to RGB, not CMYK, or Greyscale. I'm totally at a loss... My customer is needing this tomorrow. So a really fast correct reponse would be FANTASTIC. Been woring on this artboard for a little over an hour and can't do what I need done. I open new Artboards and the same problem persists..
View 2 Replies
View Related
Jun 19, 2013
When I preview or play a slideshow in Lightroom 5 I see a black screen. I've tried it using various settings, images, lengths, and with the show saved or unsaved, all with the same result. In a preview I can see the show advancing through the slides; all remain black.
Sometimes (unpredictably) the screen isn't black, but rather two colors or color washes separated diagonally.
There are no videos in the shows. (A black screen for a slideshow with a video as the first slide is a known issue mentioned in the Lightroom Journal.)
Exporting to pdf works properly. An exported video shows as a black screen.
(Mac Pro, OS X 10.7.5, Radeon X1900 XT video card)
View 33 Replies
View Related
Sep 18, 2013
I have upgrade to 5.2 but still have the same problem whith black screen.
View 1 Replies
View Related
Feb 8, 2012
I am trying to make a png (tried a gif too) by going to File >>> Export for Web.
In the new window I selected following: -
Format: PNG
Color Mode: RGB color (24 bit)
Transparency Box: Checked
In Advanced, Anitialiaced Box : Checked
Embed color profile Box: Unchecked
Interlaced Box: Unchecked
Resolution 72
The image displays in comparison window as transparent but when I save this image and upload it on my website, the background changes to black instead of transparent.
I am using windows 7 Premium (64 bit) and Corel Draw X5.
make it a transparent background image.
View 6 Replies
View Related
Nov 19, 2011
my vray materiel slots shows a plane black color( they are vray materials only) scanline and MR looks okey
system conf: dell precision T3500 with Nvidea quadro 4000 and 6 gb ram
View 1 Replies
View Related
Jun 8, 2011
PREVIEW.jpg
After installing SP3, the Export preview window, as CMYK, shows a black window, but the file is exported correctly. This situation does not happen when the file is exported as RGB. Any explanation why this happens? I´ve tried with different files and happens the same "black window".
View 7 Replies
View Related
Jan 31, 2012
.jpg export screen shows a solid black area instead of my graphic image - why? but when I open the .jpg file that was exported, it looks correct (not a large black rectangle). why is the preview window in the export window showing a large black area? see attached screenshot.
View 9 Replies
View Related
Dec 14, 2011
The standard black color in Inventor appears as if it has a subtle texture when I use Realistic shading mode (see image). But when I edit the style there is no Use texture Image or Bump / file associated with it. I tried Realistic Appearance checked on & off in edit dialog & it makes no difference.
I want to represent a flat anodized black color for some marketing images. We have a lot of parts that use the standard black color & I really don't want to spend the time to change them all to a new custom black color (without a texture).
How can I make the standard black not have a texture in realistic & rendered modes?
View 5 Replies
View Related
Jul 20, 2012
It was working fine. Then I just did a simple command (pattern a part) and the entire workspace blinked out. The first time it happened I hit UNDO and it was back. So I got out of the drawing and got back in and tried the pattern again. Same issue but this time when I hit UNDO it would not come back. I closed the file without saving and when I went back in the file the workspace is still nothing but white screen. In the browser everything is still visible except for those that I had already changed to invisible. I tried making an invisible to visible and nothing happened. I got out and tried opening the "old version" which should've been before any of this happened and it is also blank. I can go to an ipt or iam in the browser and hit open and it will open in another screen just fine. I just can't see my main assembly. I have Inventor 2012. It shows no errors or messages. I have even rebooted.
I looked thru the forum and found a past issue back in 2005 identical. I tried doing Find in Window on an item in the browser but for some reason that option is not even in the list when I right click.
View 6 Replies
View Related
Nov 13, 2008
trying to get CS4 Design Premium to install. I finally managed, with the considerable help of a tier three Support Engineer. Since then I've had about a week's exposure to Photoshop CS4. Here's a list of things I don't like and/or those that don't work:
1) Program always crashes when I try to save a GIF file or try to use any of the new 3D tools.
2) I like two-across tool palette. When I drag workspace to left, it covers up this palette.
3) I like to leave three palettes open on the right, History, Characters and Layers. For no earthly reason that I can fathom the Layers palette has gotten considerably wider, and it cannot be reduced horizontally. Oh yes, I could reduce these three to icons, but then I'd be constantly clicking to open them and clicking to close them.
4) Open palettes have foreground precedence. This means that when I try to enlarge my workspace to the right, the workspace scroll bar disappears underneath the palettes.
5) The essentials button is destructive. I found this out the hard way when I clicked it and it wiped out a newly customized workspace. Now I know to save my customized workspace immediately upon completion.
6) Why did Adobe add the Adjustments button. It just creates an extra step when making adjustments. CS3 was smart enough to pop up the correct controls when adjustments were being made. Example: create New Adjustment Layer > Threshold. On my copy of CS4, I have to click Adjustments before the control shows up.
7) The new toolbar (at top of screen) wastes considerable space and is not deselectable. Hint courtesy of Support: Save your custom workspace with a very short name 2-3 characters; then this toolbar will combine with the menu bar.
8) Scrolling through highly magnified images is abysmally slow - much slower than it was on CS3.
9) The clone brush is less accurate in CS4, and it doesn't always turn off when one is finished cloning.
10) None of my CS4 files installed with responsive, indexed Help files. Now, every Help request sends me to a sluggish web site where there are no indices, poorly organized information, and in some cases just a message that Help area is under development.
11) I haven't been able to get the Patch tool to work correctly.
12) When program crashes (not always while attempting to save GIFs or 3D), it does so with generic, uninformative error message. In one week, I have had more Photoshop CS4 crashes than I ever experienced during the lifetime of CS3.
13) Why did the installer leave 34 superfluous language items (ones in anything other than US English in my case) in both the Legal and Lmresources folders? The product is bloated enough without oversights like that.
How many more will I find during the next week? I don't know, but I'm sure there are more to be found. How many of those that I did notice are due to the dreadful suite installer? I don't know the answer to that one either, but I suspect the installer may well have played a role.
I'm sure many will disagree, but IMHO Photoshop CS4's user interface is godawful compared to its predecessors. I can't find a single thing that can be accomplished with less mouse activity or keystrokes than earlier versions, but I have found quite a few things that demand more.
I was fortunate enough to have my installation issues addressed by one of Adobe's top support engineers. Had it not been for that, I'm reasonably certain I'd still be trying to install CS4. I've been using Photoshop since version 3, and the Creative Suites going back to the first one. This is the first time I've ever felt that quality assurance was completely ignored for the sake of meeting a self-imposed release schedule.
As I remarked in one of my earlier email exchanges with Adobe support, "I wish that every software Product Manager would study the reasons why Vista and Office 2007 have gotten such lukewarm receptions." I'm afraid the CS4 team didn't learn from Microsoft's mistakes.
View 12 Replies
View Related
Apr 25, 2013
What would be the best way to get rid of the white spots on the attached photo?
View 2 Replies
View Related
Mar 22, 2013
I need to turn a B&W photo into screen print art without using a line screen (just block colours) - essentially I'm creating a 3 colour black and white images using:
- PANTONE 4625 C
- PANTONE Warm Gray 6 C
- PANTONE Warm Gray 1 C
Using a bunch of techniques (unsharp mask, tritone and posterize) I have line art that looks great with a posterize level of 4. But I've noticed that Photoshop is using my Tritone colours to mix itself an extra tone - and if I switch to a level of 3, Photoshop chooses to remove the level that PANTONE Warm Gray 1 C uses which deletes all the highlight detail.
Is there a way I can specify colours that Posterize uses?Or is there a different approch I can use to split the tones into the ones in the Tritone?
I've tried playing with the curves in the Tritone window to try and influence the colours photoshop uses (so no colour mixing) but maybe I need to somehow save the Tritone layers into the channels pallate?
View 2 Replies
View Related
Mar 9, 2005
I had a picture of a 10 year old, I want to use photoshop to make the 10 year old in the photo look 60... i want to add wrinkles, age spots, yellow the teeth, thin the lips... etc...
View 2 Replies
View Related
Mar 28, 2005
I just got a freelance job cleaning/sharpening and generally making beautimous, about 100 deep sea photos...all was going according to plan, when I came upon a large group that, as soon as I brought the levels up, along came these horrific sprays of water spotting, that I have no idea how to deal with. I don't think there's a way to make it look real if I use a tool like the clone or bandaid, and I tried working in LAB mode, to see if there was any way I could make a difference with the gaussian blur, but that did nothing, and that may just have been hopefull. I can't remove the guys background, and I know there are some extra softwear programs that work with spotting etc. but in this case I can't see how they would work and still keep the picture sharp..?
View 6 Replies
View Related
Oct 14, 2012
I trying to touch up an old photo that has lots of white spots on it. I want to use the patch tool but when a select a section of the photo and use it to patch the patch is partly transparent, you can still see white through the patch. I don't have transparent selected so I don't know why this is happening?
View 11 Replies
View Related
Jun 14, 2012
I am using the CS6 trial in order to decide if I want to switch over from CS4. When I try to use liquify, I get a teal screen with a few light spots that are vaguely in the shape of the image. If I select a tool it does not show up over the image, only around the edges. I've heard that CS6 liquify requires significantly better graphics than previous versions. Is my computer simply incapable of handling the new version? I realize that my computer is not ideal for image editing, and I try as much as I can to work in the maclab at school, but both of these computers were able to handle CS4.
Computer1: AMD athlon II x4640 processor 3.0ghz, 8gb ram, ATI Radeon HD4200
Computer 2: intelcore i7-2620m processor, 6gb ram, intel hd graphics 3000
View 4 Replies
View Related
Feb 7, 2005
I recently got married and it was drizzeling the day of the wedding when we took the beach photos. My very favorite photo was one that had water spots on the lense of the camera, so in turn made the water spots on the digital photo.
I know photoshop well, but don't spend a lot of time retouching photos, so this isn't an area that I am super well versed in.
Do i just use the clone tool or the healing brush? I haven't used the healing brush very much or the bandaid tool? Are they similar to the clone tool?
View 1 Replies
View Related
Dec 27, 2012
what would be the best way to eliminate shiny spots on a face?
View 2 Replies
View Related
Jun 28, 2013
I have attached some pictures, you can notice the flash spots due to reflection on silver color. What's the best way to remove these spots and improve the photo quality. (I understand the best way is to shoot the photos in a specific environment to disallow this effect, but I am asking if there is away to edit it using Light room and remove the flash effect).
[URL]......
[URL]......
[URL]......
[URL]......
[URL]........
[URL].........
View 1 Replies
View Related
