CorelDRAW X5 :: Transparent Background For Exported GIF Or PNG Shows Black?
Feb 8, 2012
I am trying to make a png (tried a gif too) by going to File >>> Export for Web.
In the new window I selected following: -
Format: PNG
Color Mode: RGB color (24 bit)
Transparency Box: Checked
In Advanced, Anitialiaced Box : Checked
Embed color profile Box: Unchecked
Interlaced Box: Unchecked
Resolution 72
The image displays in comparison window as transparent but when I save this image and upload it on my website, the background changes to black instead of transparent.
I am using windows 7 Premium (64 bit) and Corel Draw X5.
Running Designer pro 6.1.2.13287 on Windows 7 Home Premium
I'm probably bumbling around and buggering up the export of png formatted images, but it appears something besides transparency is getting exported as backbround.
I do `Select all' then export to png.The poorly drawn green arrows were added in photoshop to show the area I'm talking about. The xara document which is apparently also getting exported in some way.At least certain other tools see a black background in that area. Not all tools have that problem with the image. For example; photoshop sees only transparency there.
But when I browse the exported *.png files with `Epson print CD', it sees black in that area as illustrated by the screen grab below.The first two images look clean as expected (I'll explain in a moment) but the third (the one that hasn't been cleaned in Photoshop) shows the black background in that area.
The first two were cleaned up in photoshop and now appear clean as expected.So to get a usable image for import into Epson's tool I must:
1) Export as PNG from Xara
2) Open with Photoshop and run thru a procedure where anything outside the outer blue ring in the image is deleted.(Even though PS only sees transparency, if I select everything from the blue ring outward and delete it, saving back to png, then Epson's tool sees transparency there)
3) Import into `Epson Print CD' and print the graphic to a printable DVD.
How can I skip the second step? That is, how can I get a clean export in step one? What is it that some tools are seeing as black background?
I have a photo with a background that I erased and when I open it in Windows it looks fine, but when uploaded to a site like Facebook, the white background shows up.
I just ran into a problem, using Videostudio X5 Ultimate. When i try to import a .PNG-image with a transparent background, but then the background of the imported image turns black.
However, when i open the same image in an image-viewer, the background actually is transparent.
I am trying to put text with a black light film in the background at the bottom of the picture and I cannot do it. I don't know how to isolate the portion of the picture I want with the text with the light black background while you can still see the picture through black background.
After installing SP3, the Export preview window, as CMYK, shows a black window, but the file is exported correctly. This situation does not happen when the file is exported as RGB. Any explanation why this happens? I´ve tried with different files and happens the same "black window".
.jpg export screen shows a solid black area instead of my graphic image - why? but when I open the .jpg file that was exported, it looks correct (not a large black rectangle). why is the preview window in the export window showing a large black area? see attached screenshot.
I have an image that is semi-transparent. I am able to take the black out of the background around it, but am unsure about how to remove the actual background from behind the image. I need to superimpose this image onto another-hence the background change. I have the newest version of PS.
all transparent png files copied from Chrome and pasted into Photoshop CS6. The background is black rather than transparent. These images are one I created and exported using "save for web". It worked fine in CS5 so it must be a bug.
I constantly have to edit images taken from our website so being able to copy an image quickly with transparency intact is very important. I'm running CS6 in Windows.
I'm currently deployed in a computer came in the mail broken so I'm unable to do this. How to take away the black background to make it white or transparent.
Photoshop is acting wonky now that i've installed windows 8. i had to upgrade my video drivers, amd radeon 5700 series. now when editing photos, the background goes black or transparent.
I just learned how to make the background of my images transparent and am learning how to use layers. I am trying to save my pictures to picasa and photoshop so they are backed up and I can easily access them from any computer. I noticed that some of the pics are showing up all black. It's like the colors are inverted almost. I can kinda see the image in white, but mostly the whole thing is black. I noticed the same thing happened when I tried to open some of the images in paint.
I checked to see if they are all the same file type and they are not. Some are gif and some are png.
Also, some of my images won't open in windows photo gallery. They open in a blank web page. I originally go to my pictures and find them there, but when I click on them they open a page in IE instead of windows photo gallery so I can't crop them or anything.
I am trying to work on a project where I print silhouettes or simple images on vintage sheet music to use as art. I need to be able to take them to a print shop to have this done and I can't do that if the images show up black or won't open in a regular program.
I am attaching a pic that saved black like I talked about and a pic of what it is supposed to look like.
I am new to Gimp and would like to ask if there is a way to make a good worn out effect more or less like this on a black logo. The problem is that they are using a fork for it and I am a student and can't afford a fork.
The aim is to make a black print on transparent background with transparent scratched "holes". Are there any tips how to do this?
I think it might be the GPU but i used apple computers with intel hd 4000 and it didnt do that. I have amd hd 7750 with an i5 and 4gb ram. Photoshop doesnt run slow its just the picture going in and out.
I often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
I am working on a Mac (Snow Leapord) with Photoshop CS6. When I try to save a sliced and transparent PSD in the Save For Web dialog box with PNG-24, the transparency dissapears once exported. I have the transparency and interlaced boxes both checked. The images appear transparent in the Optimized Save for Web dialog box, but the transparency dissapears once exported out of Photoshop.
I never had a problem with this when I was using CS4...
Using CoreDRAW, so I drag a PNG from the web ([URL]......) into CoreDRAW. The image shows up perfectly, but the background is black. I know it is a transparent image because the background is white on the web page. I want to make the background transparent.
Also, after the image is transparent, I want to extrude just the visible part. Will I be able to just "Convert to Curves" and then extrude?
creating a signature only seen (signed in black ink,) with a transparent background. I'm a small business owner with employee ID cards. The card background has lines and a few images that I would like the signature to go over with the background being seen as is. When I try importing or copy & paste a gif signature from one of my employee’s onto the business card, the white background still shows. I am using CorelDRAW Graphics Suite X4.
I have been creating PNG's with transparent backgrounds forever, but now I need one with a transparent background AND a partial transparency area for a glow effect. Draw X3?
I am preparing some water paper decal graphics which will go onto a black surface. I have made decals using either a solid yellow or a gold uniform fill with CD6 & RGB color model
I have increased the printer (Canon Pixma 860) intensity to the max.The end results don't seem to pop on the black background surface like they do on the white decal paper background.
I have a JPG with a graphic over a white background. I converted to GIF using Corel PHOTOPAINT. In the GIF Export window, hitting the background with the eyedropper tool is supposed to make anything that color transparent. Things appeared to be working when I clicked the Preview button. But....
Whenever I try to put this new GIF on top of another bitmap, I still have the white rectangle background. I tried I converting the secondary background image to GIF, but I still have the original white box around the first image.
I have a BMP image that is part of a larger logo that I need to be cut out on my inline cutter. The problem is, when I convert the whole logo to the plotter file, the BMP image does not show up. I have tried using the outline trace to convert the BMP to a form my plotter will recognize, but when I save the file, it saves it with a white background that shows up in my plotter image. This white background messes up the whole logo.
Is there any way to save the file where the image has a transparent background? I have been saving it as a .cmx file and there is no option to save it as a transparent background.
I'm practicing using Coreldraw and made a logo with a transparent background. It's a combination of rectangles and text. I exported the logo as a png. Everything looks fine in corel, but when I upload it to the web the edges are very ragged on the rectangles and text. I tried it with and without converting to curves and the same thing happens.
I want to load in a background image, then draw some lines on it. Then I want to save ONLY the lines I drew as a PNG with a transparent background. I'm sure this is easy but I haven't used CorelDraw in a long time.
