Lightroom :: Slider Controls In LR4 For Process 2010 Photos Do Not Work Properly
Mar 16, 2012
In upgrading to LR4 I wish to keep my process 2010 photos as process 2010. There is no need to redo them because the update pretty much forces you to start again with most processed photos.
My problem is that I now find that LR4 greys out the detail and color sliders for Luminance and color noise reductionas if they are process 2003 photos. That is, I do not have access to the detail and color for the noise reduction section.
I can only assume this is a bug or that Adobe have changed the Noise reduction engine.
View 1 Replies
ADVERTISEMENT
Jul 27, 2013
Does this slider work like the radius slider in high-pass filter in PS?
View 9 Replies
View Related
Feb 9, 2012
I want to put a gradient color on a slider control, much like the color picker does. How do I do that?
View 3 Replies
View Related
May 28, 2013
The controls that used to appear on the workspace after the pattern fill tool is selected are no longer accessible. I don't know the name of this control, but it has handles allowing a pattern fill to be re-sized and rotated within an object.
View 14 Replies
View Related
Jan 23, 2013
When using the Smartbrush tool in Elements 11, I cannot get the slider controls to show on the right hand side of the workspace - the tutorial shows them and describes how to use them (easy!), but I can't get them to show.
View 3 Replies
View Related
Oct 22, 2013
I'm using ACAD (2011) most of the time in 3D. I like to work that way and it goes really fast!
Now, sometimes I want to flatten my 3D drawing and show my obscured lines and make them dashed afterwards. With the flatten command and explode it works fine... but... some lines just move! For example, a block with size 100,200,100 turns into a square with size 100.9 x 199.3, even if I use the command in 100% top view!
View 9 Replies
View Related
May 19, 2012
I recently upgraded to LR4 (on OS X 10.7.4), but this problem was also present in the previous version.I usually move photos around using the OS X Finder (as sometimes they are outside my Lightroom catalog). To make the updates available in Lightroom I've always used the "Synchronize Folder" option. It did work perfectly for some time, but lately that is not the case.For example, here's a folder called "Parents".I added some photos to it using Finder, then tried to sync it.
Normally Lightroom would find the new files and allow me to import them. What happens here is that Lightroom wants to remove all the photos that already exist in the folder (and Lightroom catalog) and then re-import all of them + the new ones.
First I tried to select "Import new photos -> Show import dialog" and import only the new photos. That didn't work, too. (Please see the image below; however in this sample I've chosen to import/remove all of them).
As you can see Lightroom re-imports the folder as a top-level folder, but it should be a subfolder to "Other". When I try to move it manually to "Other" I get an error message that tells me that I can't do that as a folder with the same name is already there.
View 5 Replies
View Related
May 13, 2012
I purchased and upgraded to Lightroom 4.0. Got things to work fine with some ACR updates for Photoshop CS3 that I'm currently using. Now have ACR 4.6 installed (the latest for my version of PS) as well as ACR 6.7.
I was able to make edits to the DNG RAW files in Lightroom 4.0 and then choose Edit in Photoshop (Command-E) and see those changes in a PSD file in Photoshop, where I could make further changes.
All of a sudden, I went to edit a photo in Photoshop and saw the original DNG file with no Lightroom edits. Some tinkering and update to Lightroom 4.1 but nothing can seem to make it show those Lightroom edits now when I go to Photoshop.
Mac OSX 10.7.3
Photoshop Lightroom 4.1
Photoshop CS3 Extended 10.0.1
View 3 Replies
View Related
Jun 8, 2012
in print module main window for image control (not preview window in the left upper corner) is blank. what is the reason and how can be remedied? os Mac Lion 10.7.3 lightroom 4 ( the 3-rd version had the same problem)
View 8 Replies
View Related
Mar 18, 2013
I can start LR : but it gives immedidately the screen : unexpected error opening catalog, when I choose 'choose a different catalog' : he aks me to select a recent catalog to open, but this doesn't work en I neither can check the integrity of the catalog. Is there any possibility to do a repair of the program without losing my material from before ? When I search .ircat I can' t find any files.
View 1 Replies
View Related
Dec 2, 2012
I am a relativcely new Lightroom user, and brand new to Lightroom 4. (I just upgraded after a hardware failure forced me to get a new computer.) My photos all came up missing -- mainly because the new computer assigned a different drive path to the external hard drive where most of my photos were stored. I spent much of yesterday locating 5000+ photos in my old catalog. Late in the day I tried to import the "located "photos into the new Lightroom 4 catalog. I am not sure what actually happened, but the photos do not currently appear in either the old catalog or the Lightroom 4 catalog. Fortunately, Lightroom does seem to know how to find them, because if I click "find previous process photos," the re-located photos are displayed. How do I get these photos incorporated safely in a catalog? Do I need to do take appropriate steps before conducting any other processing of photos?
View 3 Replies
View Related
Nov 25, 2012
when importing in Lightroom 4, the auto tone adjustment function does not work properly. Most images come out strongly overexposed and there is no way to stop it
View 2 Replies
View Related
May 13, 2013
I have just purchased an Olympus OMD EM5. When I download images to Lightroom (v4.4) I have to manually convert to Process 2012. Am I doing something wrong? Why does this not happen automatically?
View 3 Replies
View Related
Nov 4, 2013
How do I view and process photos kept on an external drive?
View 2 Replies
View Related
Dec 1, 2013
I purchased LR 5 last week but the start button in the presentation mudule doesn't work properly. I get a black screen and nothing happens. I have to press the esc button several times to return to LR.
View 4 Replies
View Related
May 27, 2013
I am trying to append GPS data to my photo's using a track log which I have converted from KLM to GPX. The information loads onto the map just fine, but after selecting the option 'Auto-tag xxx selected photos' the process bar does appear in the top-left corner, but never progresses.
View 3 Replies
View Related
Dec 13, 2013
How can I search and/or filter to find photos which have not been updated to the current Process Version? I would like to get a list of the photos rather than going through them one by one and looking for the lightening bolt.
View 2 Replies
View Related
Mar 8, 2012
So why did you remove the possibility to correct ca manually?
View 7 Replies
View Related
Dec 17, 2011
Is there a way to batch process (basic auto tone) group of photos in Lightroom?
View 1 Replies
View Related
Jun 11, 2013
I've just exported as catalog 2 images from an older catalog ( process version 2010 into LR5. there was no way to automatically convert them to 2012 process.I had to turn on the calibration panel in Develop mode and then set it to 2012 and then copy the 2012 calibration to the other image.
As a check, I checked this by exporting 1 image that was process version 2010 into LR5 and it automatically made it 2013,
Then I checked it again, imported a catalog from LR 4.3 which had only process version 2010 images in. The import upgraded and disgarded the temp library used in the upgrade process, and again, there was no option to automatically convert the images to PV2013.
See graphic below
Which has to be a dropbox link as the add image is not working in Chrome this morning,
[URL]
View 2 Replies
View Related
Jun 9, 2012
I have been working in PSP since PSP 7 so I am pretty familiar with the program. In PSP X4 when I go to adjust the opacity of a raster layer using the opacity slider on the layer palette toolbar. I click on it and I can't use the arrow keys to adjust the value. My arrow keys have no effect on the opacity slider at all. how I can get it working? It has never worked for me in PSP X4.
View 6 Replies
View Related
Aug 18, 2011
issue with the component editor in Maya 2012. It seems that the handy slider at the bottom of the editor for blending weights doesn't work. I've installed hotfix 4 and it still seems busted.
View 1 Replies
View Related
Jun 26, 2013
Using MacPro (5 years old), OS Lion, full RAM, 4 HD's with 2 TB+ drives, plenty ofroom left over in all.
ALL 44k images located in one LR3 catalog (recent upgrade to LR5 hoping for remedy 2 days ago) show 'read-only' notice, so after doing any kind of work on them in develop, etc. I select all (in specific folder, not 44k photos!) then save it, a notice comes up and says these are 'read-only' files. Thus not able to save any work that is apparent in LR. BUT, when exported as JPG all changes are saved.
I have opened various folders, NOT via LR, but via Finder (OS Lion) and opened one by one using PS 4 and they open fine in RAW converter window. Save as PSD, all files look fine. Same for JPG's.
The issue is LR, or hard drive or something along the chain where the photos, when viewed in LR, say they are 'read-only'.
Via Finder window I have opened various files (denoting read-only notice) and right-clicked to 'get info' on that specific photo. ALL files are 'read and write', there are NO files that are denoted read-only when getting the info. I checked 50+ photos in 25 different folder locations.
Laptop test:
I started a new LR catalog in LR5, with ZERO photos and imported a few folders, with images that had 'read-only' notice to make sure I tested the same photos that had given me the read-only notice.
Did a test on photos with 'read-only' files on a laptop (OS Mountain Lion), pulled files from HD where ALL 44k photos are located. Copied to thumb drive, imported with LR5, copied to desktop in test folder, all photos came in fine, slected all, did global edit to all images, saved all, all images were saved with NO 'read-only' notice. This is true for a series of folders.
So my test, if it proves anything, is that either LR is messed-up or the HD is messed-up on MacPro tower or something is telling LR to show the 'read-only' notice to pop up.
Back-ups:
Back-ups were done from HD where all 44K photos reside, to 2 (two) other drives, within MacPro tower. So ALL 44k photos are essentially the same. This was a drag-n-drop not using Super Duper or similar byte-verification software.
why ALL 44k images say 'read-only', when viewed in LR5 in MacPro tower but NOT in laptop? HD is 5 years old...could this be the weak link?
Also, considering to wipe the complete system drive (not HD where photos reside) and re-load everything from scratch to begin anew. My concern is will this work and then, will wiping all drives and re-loading all images, then re-loading LR5 catalog will solve this. I am resigned to a week of doing this if it works as right now, I am at a stand still and cannot go forward or backward.
View 8 Replies
View Related
Nov 12, 2012
When I import pictures from my SD Card I usually leave copies on the card for a while so I have them as backup, and to also be able to see recent pics on my camera. However each time I go to import pictures from that card within LR, it defaults to selecting all pics on my SD card even though I have the "New Photos" filter selected at the top of the import box. It always puts all my photos in the "New Photos" section, so I have to deselect all the photos that I have already imported into my catalogue so I don't get duplicates. How do I get LR to only import pics that haven't been imported bfore?
I am aware of the "Don't Import Suspected Duplicates" option, but that is not the samea as what I am looking for. It only deselects photos that still exist in my catalogue. Any photos that I have deleted from my catalogue remain selected in the import box as it doesn't see any duplicates.
what I'm missing to have LR only select photos that haven't been previously imported from that card?
View 9 Replies
View Related
Feb 22, 2012
What is the variable that controls the order in which objects are selected? In other words, I want to be able to always select the last object created by default when objects are overlapping without using object cycling.
View 5 Replies
View Related
May 25, 2012
How do we use Vault with an outside vendor that controls a large ‘master layout’ directory of AutoCAD drawings that is given to us each week by way of FTP? How do we update the files in vault without having to check out dozens of files or folders then copy the new files (which often have missing xrefs that have to be fixed before Vault will accept them) into the working directory then check back in the files. This is way too time consuming and complicated to do on a weekly basis.
The simplest procedure we can think of looks like this:
1) Download new set of drawings.
2) Open these drawings in AutoCAD reference manager to fix/remove broken xrefs so Vault will accept them.
3) Check out the entire folder that needs to be updated from Vault
4) Paste the new drawings over the drawings in MyDocsVaultVendor
5) Check all the drawings in through Vault, solving any vaulting issues that may have been missed in the reference manager.
View 1 Replies
View Related
Jul 13, 2013
I shot an event for a couple (a reception) and I didn't have my gray card so I set my Canon 5D mkII on auto white balance (shooting with a Canon 24-70 2.8 and a Sigma 85 1.4). As you'll see from the two example photos - the shots taken in the venue lobby looked fine, but the shots from inside the event itself were amazingly saturated. The room had a ton of very bright uplighting in purple and pink - the shots looked fine in the viewfinder, but once I brought them into LR4, there was a nearly complete purple/pink cast over everything. Setting the white balance in LR to auto, tungsten, flourescent - nothing worked. Adjusting the temp sliders - only slightly better. Reducing vibrance and saturation useful a little more, but I'm really having a hard time finding a fix!
View 6 Replies
View Related
Jul 3, 2011
I 'm trying to create a window from the command panel( for example fixed) and firstly I can't create the width unless I go to modify nor can I add rails and panels.
View 2 Replies
View Related
Feb 6, 2013
I'm used to work with an ortographic wireframe view and a perspective shaded view (from other 3d app), I've tried to reproduce this in Max, without much success, the problem is switching between the ortographic views, the hotkeys doesn't work properly (the camera never displays what I want after switching) and the ViewCube seems somewhat better, however, when switching views using the ViewCube, sometimes it just doesn't align perfectly with the view so the grid doesn't appear, and I need the grid on the ortho viewport.My install is fully updated. I would like to know if it's possible to make it work properly, if possible with hotkeys. I've already tried to disable the animation, it seems to work a bit, but when I switch to the back view, this bug always pops in.
View 1 Replies
View Related
Mar 8, 2014
Just recently installed Photoshop Elements 12.0, but cannot et the Process Multiple Files option to work. It is grayed out on the Files menu.
View 3 Replies
View Related
Jul 31, 2013
When I (as I have in Photoshop CS2,3,4,5,5.5 and 6) click in the letting menu and change the letting, it allows me to change it and then when I click enter, it jumps down to a completely different number. I set it to 200 and hit enter and it drop to 19. I change it to 200 again, it becomes 47.
I am runnning the updated version of CC on windows 7 64-bit.
View 1 Replies
View Related
