Lightroom :: Save As JPG For Offsite Printer
Sep 2, 2012
I have a TIFF file that I am preparing to send to an offsite printer (Bayphoto/Nations/WHCC).
They all request a max quality JPG in the sRGB color space with resolution (depending on the company) somewhere between 220 and 300.
My original TIFF has a resolution of 250.
When I 'save for web' to a JPG and then check the properties of that file, it shows a resolution of 96. When I 'save as' to a JPG and check the properties, the resolution is 250.
Since the pixel dimensions are the same, does this really matter? Seems like I should stick with 'save as' to ensure the proper resolution.
View 3 Replies
ADVERTISEMENT
Aug 16, 2013
When i set more than 1 copy in my print window my HP ColorlaserJet 5550 printer output 1 OK and status side saying: Cannot save job in printer.
Printdriver new updated (PCL6 );
firmware new updated:
View 2 Replies
View Related
Nov 7, 2012
I use an outside service to make prints. How can I save an image in PSE 11 in either TIFF or JPEG format with the color profile for the outside lab's printer?
View 4 Replies
View Related
May 2, 2013
I'm currently using AutoCad Electrical 2010 and we just got a new printer. Is there any way to map all of my electrical drawngs to that printer without opening each drawing and selecting the new printer?
View 7 Replies
View Related
Jun 11, 2013
I just downloaded and installed LR5 successfully to my iMac (2012) running OS 10.8.4. Everything seems to be working fine (LR4 catalog converted, Import works fine, etc.) EXCEPT printing to the same HP printer I use with LR4. When I press the Print button after setting things up, the bar on the upper left corner proceeds quickly, the message Task Completed appears (and goes away quickly), BUT...nothing happens on the printer. It just does not get the print job sent to it. The iMac reports that the printer is Idle, there is no record of a job being received.
I checked the printer, it works fine. I can print from Photoshop without a gltch. So, comunication between the computer and the printer does not seem to be the issue.
View 3 Replies
View Related
Dec 22, 2012
I'd like to use printer color management in LR4. My printer is not in the list. Where do I get ICC profiles for an HP Photosmart 8250 printer and "HP Advanced" paper?
View 20 Replies
View Related
Jan 23, 2014
For, my printer, we need to use the Adobe RGB colorspace. But maybe the printer is even more limited in some areas than that color space. Is there a way to know?
View 2 Replies
View Related
Jul 18, 2012
I'm running LR 4.1 64-bit in Windows 7.
I have a number of printer colour profiles in the 'System32SpoolDriversColour' folder but I can't see them from Lightroom's Develop module (although the display profiles do appear).
View 6 Replies
View Related
Mar 6, 2013
how to change the printer associated with PSP or add another printer? I have 2 printers installed on Windows7 but the only one I get when I try to print from PSP is the wide format printer & no option to add another. Is printing from Windows Photo Viewer my only option?
View 6 Replies
View Related
Dec 13, 2012
I live in a small town and want to get some photos printed. The only place here is Walmart. How do I send them the photos? I save my work as DNG. Do I have to change it to a jpg then send it to them with their upload software? Does that mean I change it to the preset of Burn Full Size jpegs?
View 2 Replies
View Related
Apr 4, 2013
I'm having problems printing from Lightroom. I'm printing on a Kodak ESP C315 with Epson (not Kodak) premium quality paper. As per Kodak's instructions, I turned advanced dot placement mode off. The problem is - even after I've done this and set it as a default in the printer control panel (I'm using Windows 7 pro, by the way), Lightroom insists on turning it back on. Because I can print using the same settings perfectly happily from Photoshop.
View 1 Replies
View Related
Feb 28, 2013
I have been trying to make business cards in Lightroom 4. Everything works fine except no matter how I set things up my 2 X 3.5 inch photos print at 3 11/16 X 2 1/8 inch. My printer is set to print borderless 4 X 6. My settings under Custom Package are as in the screenshot below.
View 1 Replies
View Related
Mar 27, 2012
Short version: My printer profiles are not showing up in the "choose profile" dialog in LR4.
Long versioin: I'm trying to print an image from LR4 to my Xerox Phaser 8560 using a custom color profile I created with my ColorMunki. However the profile isn't showing up in the "choose profile" dialog box. There is also no apparent way to open a dialog box to search for the file. The profile is recently created. Works in Indesign CS4. It's located in the main Library/Colorsync/Profiles/ and my user (~/Library/Colorsync/Profiles/). It doesn't show up even when checking the "include display profiles" checkbox which is the only option available.
System: iMac 27" 3.4Ghz i7 16G Ram; Xerox Phaser 8560DN; LR 4.0
View 1 Replies
View Related
Sep 28, 2013
To create a new template one has to go through the "Printer..." dialog to change the paper size. Unfortunately, the only way to actually SAVE the new settings is to click OK, which causes Lightroom to print the current image. In all other programs, the "Printer..." dialog is used only to adjust settings. In Lightroom it seems to serve as a "Print" dialog as well. On Windows this violates long-standing UI function guidelines embodied by pretty much all other software.
A concrete example:
I needed to create a new template to print on 8-1/2 x 11 paper. To do so, I created a new template while in an existing template for 8x10. This copies the settings to the new template, but one cannot adjust the cell size to anything larger than 8x10. So I went to the "Printer...:" dialog to change the paper size. However, when clicking OK on the "Printer..." dialog, to save the new paper size, Lightroom starts printing the current image.
What should happen is that the settings are saved and no printing starts. Printing should occur only when I click on "Print".
Unless I've missed something and there's a way to change paper size, color profile, paper type, etc. (all the things you can change on the printer driver's dialog) from within Lightroom without invoking "Printer..."?
View 4 Replies
View Related
Jan 21, 2014
How do you set a paper size in the print module if you do not have a printer installed. I want t use the print module to make custom prints on 8x10 and 11x14 size paper. But I want to print to a JPG to send out to be printed.
View 2 Replies
View Related
Jan 22, 2014
Within Lightroom 5, I set up a print template for a new Canon ix6550 printer and used it for some months. I happily printed around 40 images.
I sold a few prints, and needed to print identical copies. Up until a few weeks ago, all worked fine.
Then, a few weeks ago, I tried to re-print 2 copies of a single image. The first copy printed OK (it looked like the original), I pressed the 'Print' button once more and the second print came out 'trashed' with extreme increases in saturation and contrast plus a decreased exposure.
I tried altering all sorts of things and printing test strips, but could not get a viable print.
I did not save any changes to the template or to the development settings of the images.
A few days later, I tried again. Without changing anything, the first test strip looked OK, so I went on to successfully print two A4 prints, then the third and all subsequent attempts to print resulted in trashed prints as described above.
Since then, I have determined that if I allow the printer to manage the colours, the test strips look fine. I don't know if I would see a difference on the full sized prints.
So I thought maybe the profile is corrupt? So I downloaded the drivers again from Canon and re-installed - no difference.(Although I do not know enough to locate and delete the originals first.)Should I let the printer manage colours? Will it matter?
View 13 Replies
View Related
Sep 29, 2013
I am unable to access correctly loaded RGB printer profiles in Lightroom 5. In the print module when color management profile "Other" is selected no loaded profiles appear; and Lightroom usually freezes. Using Photoshop v6 on same computer I can access all loaded printer profiles. I have reloaded LR5.
View 7 Replies
View Related
Nov 2, 2012
How to upload a custom printer profile into Lightroom 3?
View 2 Replies
View Related
Apr 8, 2014
Using Lightrooms printmodule with this printer is a big problem for me. Using Cannon Print studio Works, but then you loose a lot of great functionallity in LR print module.
It seems that when I make a preset or set up printer with correct ICC profile the canon printer driver automatically resets to its own default.
It looks like a print driver in the background resets everything i do. Very confusing and Canon support points to adobe.
My setup:
Macpro with OSX 10.9.2 (latest version)
Lightroom 5.3 (creative cloud member, always latest version)
Canon Pixma pro-100 (bought new april 2014)
I have looked several places on internett and it looks that there are a lot people having similar problems.
View 5 Replies
View Related
Feb 3, 2014
how do I upload photos to a commercial printer like Shutterfly.
View 1 Replies
View Related
Apr 30, 2012
softproofing. I apply a color profile appropriate to my printer/ink/paper, and then I can see what colours are in/out of gamut, and won't print as I expect. But, when I click Soft Proofing, the image takes on a less saturated look, however if I select SRGB as a profile it looks normal. That is I believe because sRGB is the profile I have been using anyway. What I don't understand is why the whole image changes. I assume there is more to it than just colours in and out of Gamut.
I do so LR4 asks if I want a proof copy, which is fine and I understand why. When I make a proof copy though, all the adjustments are greyed out so I cannot do anything.
View 2 Replies
View Related
Jun 25, 2012
When I try to print from lightroom the above image is what I get. If I print via the HP desktop gadget the print is good and colors are fine. The scan of the image has brightened it up a bit.II have a Acer Aspire X3950 PC running windows 7 Home Premium (64 bit). The printer is a HP Photosmart Premium C310a. I Color profile is managed by printer.
View 1 Replies
View Related
Nov 5, 2012
I am running LR4 on a Mac (Mountain Lion OS) and cannot find where to access my printer's ink cartridge status for cleaning out plugged cartridges. I can do so easily on my PC, but the interface is different for the Mac. So this is not a printer problem,
View 2 Replies
View Related
Jan 29, 2014
how to print A3 size borderless portriat using Epson R1500W. I've got this printer 2 days ago and still can not figure aout how to do it. I've got few mm blank in either side of lenght wise.
View 4 Replies
View Related
Jun 17, 2012
I'm using LR4 current version on a Lion machine (also current version) - IMAC 27" (also current version) with an Epson 9880 printer. Currently trying this with the Lion driver and version 6.1.2 Epson profiles. I've also tried this with the most recent Snow Leopard driver with the same results. The profiles are not showing up in the "other" dialog within LR4. They do show up in printer setup. I also have a 4800 here and that is working fine. I notice that the Color Sync utility is not displaying them. I've tried downloading and reinstalling, restarting, etc. - no change. I don't recall this being a problem with LR3.
I have been using the Snow Leopard profiles because of the problems associated with the shaded color/BW print dialog in the Lion printer dialogs, for what that's worth, and I thought everything was fine but now,
View 1 Replies
View Related
May 16, 2012
I am running LR4 and CS6 on an HP desktop with 4Gig Ram, Win 7 Home, Profiled Monitor using DataColor.
In CS6, all my loaded ICC printer profiles appear when setting up the soft proofing...
In LR4, most of the profiles do not appear...
The problem is that I print to an Epson 7600 CMYK printer with UltraChrome Ink and mostly on Canvas so I need to proof for that environment.
View 11 Replies
View Related
Nov 14, 2011
The photos I edit through LR do not print the way they look in the develop module. I have calibrated my monitors and I am printing in photo mode on my Epson printer. The same printer produces accurate color for photos that have not been treated in LR. I am using the free trial version of LR.
View 1 Replies
View Related
Mar 8, 2013
Unable to print from Lightroom to my Canon Pro9000 Mark II Printer, I get an error code 1062.
View 1 Replies
View Related
May 25, 2012
Why do I need to change the paper type/size in Lightroom everytime I want to print aphoto, even during the same session
I set the paper to say 15 * 18 and borderless and select print. The paper size shown in the top left changes back to A4 by itself. Try setting the options again and they remain as selected. Select another photo and try to print 15 * 18 borderless and the paper size changes again.
View 1 Replies
View Related
Mar 7, 2014
Just got an epson 3880 printer. Printing on epson paper is fine. But printing on Ilford or Moab or other papers from lightroom and photoshop have a terrible magenta color cast. WHen I print the same image from Preview, with the same print driver settings, it looks fine. So somehow the adobe apps (or my settings) are messing up the color sync. I used to have an espon 2400 which worked just fine.
I have Mac OSX-10.9.1. Monitor is calibrated. (Prints to epson paper with their profiles look great...it's just other profiles that are really bad).
View 7 Replies
View Related
Jul 9, 2013
I get a slight difference in color in my prints my when I use LR prifile vs Canon printer managed. The Canon is much truer to what I see on both monitors which, btw, are calibrated. LR throws in a slight magenta cast. Is there a way to correct this?
View 8 Replies
View Related
