I'm new to lightroom and heres what happened.
I edited a batch of photos, exported them and .xmp files were created in Lightroom Export folder.
Later copied the .xmp files out of the Export and and pasted them into the main folder of the cr2 files.
When I opened LR again, there was a prompt and I messed with it. The result now is that the developed settings are the defaults instead of the unedited/tweaked photos.
I do not want to re-develop 1000+ photos in lightroom.
Cleaning up my photo directory, i started consolidating and moving folders around in my HDD. However in doing so, I also accidently removed one of the 'catalog folder' in my Lightroom (so the original photos are still there in the physical folder, but i can't see it anymore in Lightroom). Now if I try to import the folder back into Lightroom, all my developed settings are lost (i.e. everything reverts back to the original settings).
I tried using the Find Missing Photos function and the Sychronize Folder function, both does not work with my problem. Unfortunately, my catalog backup is also a week old, so that wouldn't have my recently developed settings?
Any way to retrieve the removed catalog folder with all the previously developed settings?
import again my photos with all the settings which i had already brought to my work. It happened that my cat walking on the keyboard changed the name of the disk where lightroom used to point. Working with Lightroom 3, mac osx 10.5.8.
View 8 Replies View RelatedI loaded some folders with my pictures. In Lightroom I developed some of it, others I did not. Now I want to export only those pictures which I developed. I know, I can manually select at the bottom line all pictures showing a +/- sign and the export them. This is quite a lot of work with my 800 pictures. Is it possible to tell Lightroom that it just selects and exports the developed pictures?
View 2 Replies View RelatedLightroom 4.1 will not export a deleloped image. I have the metadata to new file set to automatic and I get no error mesage. All my new exported files are the same as the original. I need a detailed discription of what boxes need to be checked or unchecked and where to find them. Something as simple as saving changes so that I might use them in another app should not be so difficult- version 2.7 worked fine so what's up with 4.1?
View 9 Replies View RelatedI recently moved all my pictures developped with LR from my D DRive to an external one. But I guess I did it the wrong way (just searchimng for the files and moving them away). Then I imported again all my catalogs, but most of the pictures are "seen" AS DUPLICATE by LR and do not allow me any action on them. How can I fix it within deleting all the lrcat (libraries where all the changes done in the pictures are kept)?
View 1 Replies View RelatedIn Lightroom, adjustments made to a photo replace the original version in my Library. When I drag the developed photo to external applications (Gmail in the browser, for example), Lightroom gives me the original photo, not the developed one, even though I can't see the original.
Is there a way to drag the developed photo from Lightroom, other than exporting and saving a new copy to my hard drive?
Is there an easy way to export a web gallery developed in Lightroom 4 into my blogger blog?
View 1 Replies View RelatedWhen I export jpegs which I changed to "black & white" in LR 4.4, and import these exported photos into a different LR 4.4 catalog, the treatment of the imported photos changes to "color".
What can I do to keep the correct treetment?
Once changes developed I want to save them onto the original file. I export the selected image (original photo + changes) with overwriting choice but the result file has only the original and not the changes
View 3 Replies View RelatedI set custom white balance for a lot of my photos (I'm a nightclub photographer) as sometimes the colours are so saturated the image becomes unusable. Unfortunately in Lightroom 4 the photos import with the correct WB I have set but when I click on them to develop the settings are changed and the image looks completely awful. I try and adjust the image back to the way I have taken it but it never looks the same....why is Lighroom not recognising the WB settings I set within my 5D?
View 8 Replies View RelatedI'm having problems printing from Lightroom. I'm printing on a Kodak ESP C315 with Epson (not Kodak) premium quality paper. As per Kodak's instructions, I turned advanced dot placement mode off. The problem is - even after I've done this and set it as a default in the printer control panel (I'm using Windows 7 pro, by the way), Lightroom insists on turning it back on. Because I can print using the same settings perfectly happily from Photoshop.
View 1 Replies View RelatedI upgrade to lightroom 5 from lightroom 3. Now all of the develop defaults are "0" for new imported images. In lightroom 3, it would apply default settings at import. In addition, all of my presets are not adjusting exposure/blacks/whites etc like they used to. I am using a Canon XSi. Do I just have something unchecked somewhere?
View 2 Replies View RelatedIs there a way to create more color labels than just the ones that LR defaults to? Here's my use so you'll know what I'm trying to do. I use a different color for the "model" photo of a particular insect family. This allows me to search using this color and use the photos as my "easy cheat sheet" for making IDs. Since there are more than 5 insect families, I need more color options.
View 2 Replies View RelatedI have set the camera default to a single image in Develop tab all zeroed out then save the profile. Restart Lightroom but the the images are always auto exposed with extreme Exposure ect...
I tried to revert back to defaults but this also does not work and all my images end up Auto exposed.
How do I clear this from Lightroom 4.4?
Capture Sharpness
There are three distinct phases: Capture Sharpening, Creative Sharpening and Output sharpening
With regards to Capture Sharpening I’ve noticed that when I import a CR2 file into Lightroom 3.6 there is an Adobe pre-set in the Develop Module. Is this a form of Capture Sharpening default?
Sharpening
Amount: 25
Radius: 1.0
Detail: 25
Noise Reduction
Luminance: 0
Colour: 25
Detail: 50
I am looking to set the default drives used for importing images.
I do not store my images on the C: drive which Lightroom seems to default to. I want to set it to use an external drive, drive F:.
Have just got new PC with Windows 7 OS. LR 4.1 64bit is installing insofar as I can see (from purchased disc/DVD) but not responding when I try to open it. When I click on desktop shortcut or try to access from Start Menu it defaults to Task-bar. I have not been asked for serial numbers etc. either.
View 4 Replies View RelatedOk I have asked this question to adobe & still have not been addressed.My client requires a specific crop for his website.1496 x 1000 pixels..If you try to put this into the aspect ratio the image defaults to 2x3/4x6, presumably because it is so near to the 2x3 crop.This problem only started in LR3?
View 5 Replies View RelatedIn the past I keyword in photo mechanie and then synchronize in Lightroom and it brings in the keywords, but leaves the pictures as they are, which usually is at the imported stage with the camera default setting applied.
However now when I do it it simply imports the keywords and wipes all previously applied settings including the camera default settings that I used on import.
I have been using LR each and every day I have never once utilized any of the four default terms cooked-into the 'Metadata' Library Filter ('Date', 'Camera', 'Lens', 'Label').
Is there a way for me to set up new metadata search terms as defaults so I don't have to putz w/changing the same-old-same-old each and every time I open this filter?
I’m a long time Photoshop user but recently picked up LR4 to try to fine tune my workflow. I’ve noticed that after importing new files (RAW, I haven’t tried with jpg) into my library as I scroll through them (1-up, not in grid) the preview comes up and then after a second or so the WB changes to a much colder image.
Does LR4 initially preview at specific settings and then change to the individual image settings? Even if so, the final images seem very cool and I feel like I have to up the temp more than I should have to. My previous workflow was to sort in Bridge and then use ACR to import to Photoshop. I feel like I did much less tweaking of my WB this way. I feel like I’m starting from square one with LR4.
I have a set of Lightroom Print templates that I am trying to use, that are all for a 4x6 print. I can't get it to work because my page setup in the print module defaults to letter size. When I go in and change the page setup, it messes up the template and it gets all jumbled. Then when I go on to the next template, it switches back to letter size again. I want to create and hold a 4x6 canvas so these templates can either be saved to a 4x6 .jpg or printed on 4x6 paper. I know I can save a printer and page layout as part of a template by clicking the "update settings" once I have it all as i want it, but I can't even get that far because it messes up the template as soon as I change the page settings to 4x6. How do I get the canvas to 4x6 on templates that are already created so I can save them as a 4x6 .jpg or print to 4x6 paper?
I even just installed a printer that only prints 4x6 to see, but again, when I change the page layout it completely messes up the template.
In LR4, you clicked, held down, and dragged your cursor to select a custom target source point to sample from... Clearly with the big update to the Spot removal tool in LR5, this action has a different effect... So in order to mimic that old action, you have to hold down Command (Mac) while clicking and dragging to select from a custom source point.
This issue I'm having is that when doing this, the Clone/Heal option always defaults to clone. I would say that 90% of the time, I'd rather have it acting as a 'Heal' instead. Having to then go and click 'Heal' to update this fact on every single spot removal is highly time intensive to say the least, when you are editing thousands of images, in my case, at a time.
Am I missing something, or is it possible to change this Default to 'Heal' instead of clone? I like that LR4 would leave the Clone/Heal option wherever you last set it, and you had to manually change it in order to use it differently.
I am using Building Design Suite 2012 and trying to open a file that was emailed to me, when I try to open it I get an error that says "This DWG file was saved by an application that was not developed or licensed by Autodesk. What do you want to do?" When I choose continue opening DWG file it will open the file but it seems as if things are everywhere and outside the limits of the title sheet. I would think that possibly this was the intent of the drawing and they control the items outside of the title block with clipping or layer control, but here is where the weird part comes in, when I saved the file to my computer and try opening it from there (as opposed to directly from the email) when I click on it and it gives me the preview before opening the preview looks correct like the drawing is supposed to be. I have tried opening the file in Architecture 2012 and in TrueView 2012 and get the same results.
View 2 Replies View Relatedproduce a developed elevation of an assembly in inventor?
It is not sheet metal - I can't ask for a flat pattern.
Would it make any difference if I had an arc, or divided it up into numerous straight segments?
I need developed elevations for both arc and pentagon/hexagonal assemblies.
Refer to arc assembly attached.
"Developed Elevation" is missing from the "Place Views" toolbar.
Can Photoshop CS6 Camera Raw picture settings be synced with Lightroom 5 picture settings?
View 2 Replies View RelatedWhen the 'up' arrow appears in a thumbnail and comes up with the message:
The metadata for one or more of these photos has been changed by another application. Should Lightroom import settings from disk or overwrite disk settings with those from the catalog?
What exactly does that mean? This seems to happen every time I export an image to PS (CS5) and return to LR. What exactly has changed? What settings are being imported if I choose 'import settings from disk'.
how to fix the color on this photo. I have several more like it. They are scanned from photos that were developed from damaged film. On the photos where the entire image is yellowed I have no problem correcting the color, but I'm not quite sure how to make a selection on photos like these and then match the color to the other half..I am using cs5.
View 9 Replies View RelatedInventor 2013.
I want to make a contour roll and use the developed length option. How do I accomplish this.
The only way I can get this option to be available (not greyed out) is to have a closed loop sketch, if I have only a single line line sketch this option is not available.
I want to put a cable tray going from a sliding door to a fixed piece of steelwork. When the door opens and closes, I want the cable tray to adjust to suit the sliding door. I'll upload the file that I have made. When i drag the sketch it all moves accordingly, but when I placed in the assembly and make it adaptive it does nothing, it will not constrain and it will only bring up the errors.
Inventor 2012
Windows 7 64-Bit SP1
Intel(R) Xeon(R) CPU X5570 @ 2.93GHz
NVIDIA Quadro FX 3800 (Avail. Graphics Memory 4067MB - Ded. 1024 MB)
12 GB RAM
