I am using Building Design Suite 2012 and trying to open a file that was emailed to me, when I try to open it I get an error that says "This DWG file was saved by an application that was not developed or licensed by Autodesk. What do you want to do?" When I choose continue opening DWG file it will open the file but it seems as if things are everywhere and outside the limits of the title sheet. I would think that possibly this was the intent of the drawing and they control the items outside of the title block with clipping or layer control, but here is where the weird part comes in, when I saved the file to my computer and try opening it from there (as opposed to directly from the email) when I click on it and it gives me the preview before opening the preview looks correct like the drawing is supposed to be. I have tried opening the file in Architecture 2012 and in TrueView 2012 and get the same results.
Once changes developed I want to save them onto the original file. I export the selected image (original photo + changes) with overwriting choice but the result file has only the original and not the changes
I want to make a contour roll and use the developed length option. How do I accomplish this.
The only way I can get this option to be available (not greyed out) is to have a closed loop sketch, if I have only a single line line sketch this option is not available.
Does Autodesk 360 cloud storage work in any way shape or form similar to a Vault whereby users can check out, lock, and then check in designs? Can Vault be used in conjunction with Autodesk 360, or does Autodesk 360 eliminate or replace the need for Vault?
What's the best way for individuals working at multiple sites to work without overwriting each others' data or having save collisions?
I want to put a cable tray going from a sliding door to a fixed piece of steelwork. When the door opens and closes, I want the cable tray to adjust to suit the sliding door. I'll upload the file that I have made. When i drag the sketch it all moves accordingly, but when I placed in the assembly and make it adaptive it does nothing, it will not constrain and it will only bring up the errors.
Inventor 2012 Windows 7 64-Bit SP1 Intel(R) Xeon(R) CPU X5570 @ 2.93GHz NVIDIA Quadro FX 3800 (Avail. Graphics Memory 4067MB - Ded. 1024 MB) 12 GB RAM
import again my photos with all the settings which i had already brought to my work. It happened that my cat walking on the keyboard changed the name of the disk where lightroom used to point. Working with Lightroom 3, mac osx 10.5.8.
I loaded some folders with my pictures. In Lightroom I developed some of it, others I did not. Now I want to export only those pictures which I developed. I know, I can manually select at the bottom line all pictures showing a +/- sign and the export them. This is quite a lot of work with my 800 pictures. Is it possible to tell Lightroom that it just selects and exports the developed pictures?
Lightroom 4.1 will not export a deleloped image. I have the metadata to new file set to automatic and I get no error mesage. All my new exported files are the same as the original. I need a detailed discription of what boxes need to be checked or unchecked and where to find them. Something as simple as saving changes so that I might use them in another app should not be so difficult- version 2.7 worked fine so what's up with 4.1?
I edited a batch of photos, exported them and .xmp files were created in Lightroom Export folder. Later copied the .xmp files out of the Export and and pasted them into the main folder of the cr2 files.
When I opened LR again, there was a prompt and I messed with it. The result now is that the developed settings are the defaults instead of the unedited/tweaked photos.
I recently moved all my pictures developped with LR from my D DRive to an external one. But I guess I did it the wrong way (just searchimng for the files and moving them away). Then I imported again all my catalogs, but most of the pictures are "seen" AS DUPLICATE by LR and do not allow me any action on them. How can I fix it within deleting all the lrcat (libraries where all the changes done in the pictures are kept)?
In Lightroom, adjustments made to a photo replace the original version in my Library. When I drag the developed photo to external applications (Gmail in the browser, for example), Lightroom gives me the original photo, not the developed one, even though I can't see the original.
Is there a way to drag the developed photo from Lightroom, other than exporting and saving a new copy to my hard drive?
When I export jpegs which I changed to "black & white" in LR 4.4, and import these exported photos into a different LR 4.4 catalog, the treatment of the imported photos changes to "color".
how to fix the color on this photo. I have several more like it. They are scanned from photos that were developed from damaged film. On the photos where the entire image is yellowed I have no problem correcting the color, but I'm not quite sure how to make a selection on photos like these and then match the color to the other half..I am using cs5.
I do not want to re-develop 1000+ photos in lightroom.
Cleaning up my photo directory, i started consolidating and moving folders around in my HDD. However in doing so, I also accidently removed one of the 'catalog folder' in my Lightroom (so the original photos are still there in the physical folder, but i can't see it anymore in Lightroom). Now if I try to import the folder back into Lightroom, all my developed settings are lost (i.e. everything reverts back to the original settings).
I tried using the Find Missing Photos function and the Sychronize Folder function, both does not work with my problem. Unfortunately, my catalog backup is also a week old, so that wouldn't have my recently developed settings?
Any way to retrieve the removed catalog folder with all the previously developed settings?
I set custom white balance for a lot of my photos (I'm a nightclub photographer) as sometimes the colours are so saturated the image becomes unusable. Unfortunately in Lightroom 4 the photos import with the correct WB I have set but when I click on them to develop the settings are changed and the image looks completely awful. I try and adjust the image back to the way I have taken it but it never looks the same....why is Lighroom not recognising the WB settings I set within my 5D?
I am trying to open a drawing and it only let me open it read only and no one has it open. I then tried to rename it in window explorer but it gave me a message stating that the drawing is open in Autodesk 360. How do I close the drawing in Autodesk 360?
WHAT I DID: I downloaded AutoCAD LT trial version and used it for about 2 weeks. I then purchased the actual product and installed the purchased AutoCAD LT 2012. I then uninstalled the trial version.
PROBLEM: The file extension that says Autodesk Trial Player is now attached to all of my CAD work instead of the standard .dwg extension. I can not import my CAD files into Sketch Up because of this.
This is installed on an HP g7 laptop purchased new in Feburary 2012.
i install autodesk remote to try it out from home. when i went to my office to the actual work station i rebooted my machine and now im getting a popup box that says my menu file is write protected. i uninstalled the file, and rebooted my machine and im still getting this warning that my menu is write protected,. no other work station is getting this error, the menu file is a shared file running off a network and no other versions exists on my hard drive.
I am trying to import an AutoCAD DWG file into Autodesk 3DSmax 2011, but it's only importing the actual drawings... I'm wanting also to import the text box with all the dimensions/file info in it.
I´ve a problem when import all types of audio file, the application crash...but is curios that if I export the file that crash the application (in Lost and found) to the desktop and try import this audio there aren´t problem..import ok...and if this audio is edited with a image and import with import media tool (audio and video) import ok.
Another question about import / export...when a tried export a quick time in the column of status of background tasks appear the message that my "host" does not seem to exist, and not process the quicktime move.
I m importing 400 jpg file(4k resolution) and it is quite slow when comes to bin. and when i tried to open that folder in bin and trying to select all of them and taking on timeline, it takes hell of time and sometime gets crash.
I m usining Mac pro latest machine with 32 gb RAM and usining quadro 4000 graphic card. While same thing we are doing on other mac machine which is 3 years old with FCP 7, does not have any issue at all
I just installed the Smoke software and tried to open a new project as a test file, but after i made the file and made a user i clicked the "Start" button and it just says "Unable to load video device AJA_OE2K" and makes me quit out of the application.
Im not sure if this is a bug but boujou 5 doesn't export .fbx files .... Boujou 5 can only export a .dve file for Smoke .... but my question is , how do i import this .dve file ?
I know how .fbx works.... You just go to Import in Action Node Bin and click on the .fbx but I'm clueless about this .dve file ...
I've downloaded and installed the Smoke pre-release trial 2 on Mac Pro Mid 2010, 32 GB DDR3 ram, ATI Radeon HD 5770 1024 MB, Mac OS X Lion 10.7.2 .... but it can not read any file to load...it only black csreen appears?
in the file browser (import) , the .psd file will have a 'multi' indicator, which i can double click to expand/collapse the layer. The problem the process is quite slow, and when i expand it , sometime double clicking is not working because i got slow response.
