I have set the camera default to a single image in Develop tab all zeroed out then save the profile. Restart Lightroom but the the images are always auto exposed with extreme Exposure ect...
I tried to revert back to defaults but this also does not work and all my images end up Auto exposed.
How do I clear this from Lightroom 4.4?
I have a Canon 7D and some of my Raw files work flawless but sometimes when trying to open a select amount of them in CS6 I get the following error:
Could not complete the command because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
I'm not very familiar with Photoshop Camera Raw's installation My Photoshop CS6 is up to date and I installed the Adobe DNG Converter for my Mac along with Camera Raw 7.
In the past I keyword in photo mechanie and then synchronize in Lightroom and it brings in the keywords, but leaves the pictures as they are, which usually is at the imported stage with the camera default setting applied.
However now when I do it it simply imports the keywords and wipes all previously applied settings including the camera default settings that I used on import.
I have the latest LR 4.1 on a Mac. I'm working on a catalog of 3002 images. I've flagged some that I wanted to retouch. Then the retouched one, I give them the 5 star status. So, when I work, I just turn on the FLAGGED filters to see the pictures I previsouly selected. Now, I wanted to go back to ALL my image. So, I thought it would have been as easy as selecting: FILTERS OFF at the bottom right menu in the LIBRARY MODULE, but that doesn't change much. Acutally, I think it doesn't change anything. So, I thought, ok, I'll turn the little switch next to the FILTER menu. I see then FILTERS OFF. That doesn't change a thing ! So, I know I have 3000 images, but I'm stuck inside a catalog that doesn't allow me to see them (?) I realized that by pressing the little flags next to this menu, it gives me 3 options:
- FILTER BASED ON FLAG STATUS
- FILTER BASED ON FLAG STATUS (UNFLAGGED ONLY)
- FILTER BASED ON FLAG STATUS (REJECTED ONLY)
But none seems to really get seeing all my picture, flagged and unflagged one.
How can I just see all the photos, flagged and unflagged together ?
There is an apply auto tone adjustments checkbox in preferences, but it does not work properly. After checking it, some photos still require to click on auto button on the basic panel.
View 2 Replies View RelatedI just applied the Lightroom 5.3 and Camera Raw 8.3 updates and now am no longer able to open RAW or DNG files into Photoshop CC. When I select a file and choose "Edit In" Photoshop, photoshop will launch, then nothing will happen. After 2 to 5 minutes, an error will popup in Lightroom saying "The file could not be edited because Adobe Photoshop CC could not be launched." An error I've never seen before. When I click "Ok", Lightroom will show that it's "preparing a file for editing" in the upper left, it will create and save a psd to disk and in the catalog (another new behavior), then it will open in photoshop. All other file types (jpgs, tiff, psd) seem to work/open fine between applications. No difference if I open photoshop prior to selecting "Edit In". Selecting "Edit In" other applications, like Viveza, work fine.
I tried first deleting preference files in both applications. No luck. Ditto for plugins. Notta. Eventually I completely uninstalled and fresh installed Photoshop, Lightroom, and Bridge from the cloud. Same deal...can't open raw/dng files into Photoshop.
I'm on a PC running Windows 7 64bit.
I have photoshop CS installed on a G5. Photoshop was working fine, but now some of the default keyboard shortcuts are missing. The one I miss the most is (command, option ~) which should load a luminosity selection. But for some reason no longer works. I've tried reinstalling photoshop. I've tried reloading the keyboard shortcut defaults again. Maybe there is something wrong with my default shortcuts file? but I haven't been able to locate a source where I can download another. In any case i would have thought that the reinstalling the CS creative suite would have resolved the issue if the file was bad.
How do I check my keyboard driver? where is it? wher do i get another?
CS6 (Design & Web Premium)! Beautiful interface with terrific power. Just updateded from CS4.
ISSUE in PS CS6:
When I'm retouching with a tool (like the clone tool) consecutively (maybe 7-12 times), I get a "bink" sound, as if the tool has locked up. I can't use hot keys (keyboard short cuts) to undo, resize or resample without getting this "bink" sound. I've clicked on the "move" tool then select the cloning tool (with my mouse) but that only works for 1 more spot.
The "bink" continues for any other hot key (keyboard short cut) operation. I don't want to purge history until I'm completely finished. Quitting / relauncing PS clears this but only until I use the tool consecutively a few times again. What is causing that and how do I fix it?
I'm a power user with 300 images to retouch on a very tight deadline. Eeeeep.Keyboard short cuts are my salvation.
I am trying to create an animated GIF banner. The banner consist of 2 text layers and several pictures. The text layers remain fixed, only the pictures change.
I have 8 frames and each frame should have following visibility: background, textlayer 1 and 2, [picture] layer X and Xcopy (b.t.w. each picture layer and the belonging copy layer have the same picture and properties).
Now when I change the visibility from frame 1: background, textlayer 1 and 2,layer 2 and 2copy to frame 2: background, textlayer 1 and 2, layer 3 and 3copy and so forth, the visibility of one of the layers in the other frames changes automatically. Photoshop changes one of the visible layers in frame one to layer three and dismisses the chosen layer 2.
I tried merging the X and Xcopy layers, that caused one of the layers not being visible any more leaving me with half the picture. Linking the layers had no effect wht so ever.how I can prevent photoshop from changing the frames i.e. fixing the visibility of each frame?
I have problems withe the cursor: it is a cros. I try in preferences to set it to another, or a standard cursor. I then close and restart te CS6. No way to get a normal cursor.
I installed the CS6 a few days ago and this problem is there sinds then.hkank you for an answer,
I am using Mac OSX 10.8.3 and can view a font "Curlz MT" in my font book and use it in applications such as Photoshop, Illustrator etc.
If I use finder to find the font, no luck, it is also not stored in Library>Fonts. I am trying to see if I can use it in @fontface for use in website but cant seem to find it on my system.
I am having issues with my newly installed Photoshop CS5. Most of my keyboard functions are not working, as if Photoshop did not recognize that keys were eing pressed.
When creating a new document or saving a file, I cannot type anything into the document name field. Same happens when trying to create a new folder to save in.No tool shortcuts work (M for marquee, B for brush, V for move, etc.). On-canvas brush changes ([ and ] for size, { and } for hardness) also do not work.Most regular shortcuts do work (Cmd+Z, Cmd+S, etc.) but "advanced" shortcuts do not work (Cmd+Alt+Z, Cmd+Shift+Z, etc.).
I used Photoshop CS4 before with no problems. Other Adobe programs (Dreamweaver, Flash, Acrobat, etc.) are working normally.
am using Photoshop CC and just the other day my gradient tool started acting strange - when I go to apply a gradient on a layer or a layer mask, I will drag the gradient and then if I try to drag it from a different angle to add to it, it erases what I've done and starts a new gradient from that angle. I've never had this issue, is there some setting I need to have adjusted?
View 4 Replies View RelatedI have been using liquify to make minor adjustments to slim down people in photos and up to now it has always worked fine. Today I try to do the same just to make the arms of the girls (attached) a little trimmer and liquify tool refuses to allow slight corrections bit by bit. Instead as soon as you start dragging just a tiny amount it makes a huge jump and drags the pixels massively off. It seems to drag them down first, then make them in a roughly circular shape the size of the cursor.
How can I rest liquify tool to how it was? Why it should suddenly change like that unless I have tripped something by mistake. I thought at first it might be my mouse but I have tried it with mouse, tablet and trackpad all separately wtih nothing else in the USB and still the same result. Have rebooted photoshop and the computer too to no avail.
i'm trying to draw something on my screen with a pen tool but after drawing a simple letter L i get this.What's doing this? how can I fix it?
View 7 Replies View RelatedI am having a trouble with my layers
View 4 Replies View RelatedI have two layers. The top layer has a layer mask, and the bottom layer is the background. After using black to hide parts of the top layer, I try to reveal those parts again with the white brush...nothing happens. I've tried everything. Brush selected, layers visible, not a hidden selection...
View 4 Replies View Relatedi bought a new laptop and as always i installed ps cs6 and other software such as indesign and illustrator. my problem is that whenever i open a jpg/png/whatever file with photoshop OR the windows default image viewer the colors appear strange and the greys are kind of "brownish". the same problem appears when i work with any file in indesign or illustrator, but the colors appear normal when i open the images with other program such as paint.
i took a screenshot to let you see the problem[URL]?
I clicked on something a while back. Now, when I open BRIDGE, select a photo for PSCS6, the PS photo opens but BRIDGE covers PS.
View 3 Replies View Relatedhave problem with photoshop cs6. Drivers is ok, cs5 work correctly. I attached link:[URL]...
View 6 Replies View RelatedI have a photo that i want to apply several gradients from each side so it is see through on all 4 sides.
What i do is i add a vector mask to the layer and then choose the gradient tool from the left toolbar which is located next to paint bucket.
I apply my first gradient on the left side of the photo, and it works like its supposed to.
However when i apply another gradient from the top, right or bottom of the photo, it cancels out the first gradient and applies the gradient. I cant apply several gradients one after the other.
Anyone have any ideas?
But when trying to rotate an object in 2010 3ds Max while holding shift to only rotate every 5th degree it ends up rotating the same as it would when normally rotating. I know this is a feature in the 2010 version but cannot find the shortcut key in the settings.
View 3 Replies View RelatedMy right click sudenly doesnt open shortcut-menu? I went to options and right click customization and everythings fine there. Didnt touch anything at all!
View 8 Replies View RelatedAcad 2009, the revcloud command doesn't give the options for "style" or "object" anymore.
View 4 Replies View RelatedStupidly uipgraded to Photoshop CC-- no layer sthyles.
View 4 Replies View RelatedI use the wind tool a lot and here recently it's been blowing into my layer instead of away from it. No matter what kind of layer I present it always blows into it.
View 3 Replies View RelatedI've recently installed Photoshop CS5 extended on my new comp It was working fine, but when following a tutorial to make rust or metal it starts having issues.
As you can see below the noise in the left hand picture worksfine, but in the right when applying motion blue I get a fuzzy line down the middle, and occasional a sort of beveled effect around the image.If I drop the motion blur to a low count it's ok, it's when I start upping the amount.
When I first loaded up photoshop it did say it had an issue with my monitor settup which I have recently sorted but the problem still remains.
My computer specs are below.
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.111118-2330)
System Manufacturer: Hewlett-Packard
BIOS: Ver: CHG_712.rom vCHG7.12
Processor: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (8 CPUs), ~3.4GHz
[code][....
I just opened Photoshop cs5.1 and now when i use specific colors they turn black -->[URL] however this ONLY happens in Photoshop when im using 8 or 16 bit colors, 32 bit works perfectlyfine -->[URL] and even stranger yet the colors in the layers tab work fine -->[URL] my GPU is a AMD HD 7970 with the latest catilyst.
View 2 Replies View RelatedFor some bizarre reason, no matter what tool I select in the tool bar the only icon that will show up on the canvas is the hand tool, I can't change it and consequently I can't do anything but move the image around.
I have installed all the updates and patches, I have tried everything I can think of to solve it and get back to work but no other tools will work.
If you go to filter,render, lighting effects. The Frame pops up to use this effect including with a tool to manipulate the light. My tool however does not show up and how I can get my tool to show up again?
View 1 Replies View RelatedI select a bunch of mixed layers like shapes, smart objects and text by dragging my selection marquee around them. I am able to move everything around the art-board but when I Ctrl+T and resize the selected objects, ONLY the shapes are transformed. Everything else remains untouched.
There are too many bugs with CC...this program is quickly becoming unusable.
This problem only seem to happen when I have the Text tool selected and I hold Ctrl and drag to select (it turns into the black arrow). HOWEVER if I press 'V' to select the move tool and drag that and then use Ctrl+T it works as it should. So the problem lies when the user has the Type Tool selected and uses Ctrl+drag to select objects.