Lightroom :: Color Balancing Both Incandescent And Daylight In Interior Photos?
Feb 20, 2014
I take many architectural photos around sunset, so I get a mix of dayllight and incandescent in the interior photos. I can easily set the white balance to correct one area, but I'm looking for a way to adjust the other area(s). I think an adjustment brush is the way to go, and I was wondering if there was a magic preset to apply to color correct those areas, or some other method I haven't thought of.
View 15 Replies
ADVERTISEMENT
Feb 22, 2013
As a Realtor I need to be able to show both exterior views through windows as well as the interior space. I have a Sony cybershot camera but cannot find any settings to allow for this. Is there a way to correct photos on Photoshop?....or do I need a special camera/lens or what?
View 10 Replies
View Related
Mar 25, 2008
i want to be able to take a photo inside a house and be able to see outside the window also?
i realise that i probably have to use 2 photos exposing for inside and outside - and in these shots it almost looks like they have used a program to stitch the photos together.
View 4 Replies
View Related
Mar 25, 2008
i want to be able to take a photo inside a house and be able to see outside the window also?
i realise that i probably have to use 2 photos exposing for inside and outside - and in these shots it almost looks like they have used a program to stitch the photos together.
View 7 Replies
View Related
Feb 11, 2012
I have something like 1,850 photos, taken in RAW and later converted to DNG, to create a stop motion. All the photos were taken with the same camera (Canon 5D Mk II) and most of them with a 24-70L. All were taken in the same lighting conditions (in an interior, with the house lighting from flourescent lights) and the same day, in a period of maybe 2 or 3 hours. Each "take" was with the exact same camera and exposure parameters.
When processing the photos in Lightroom (using the LR4 beta) I can see some minor but very noticeable differences between color an exposure in the photos of the same "take". The exposure can be more or less automatically corrected by the Matching total exposures (although I think this doesn't work when the exposures are really similar, but there are some subtle differences like in this case, say, something along ~1/5 stop or so), but I haven't found how to try to match the white balance. All of the photos have already been set to a specific WB (I took a ColorChecker Passport at the beginning of the session), but there are still some differences between some of the shots. Some of them look a tad more greener. I blame the flourescent bulbs, but I'm not sure of the real cause.
So, the question is: is there a way to match the color balance of a series of photos to a target one? I really don't want to go photo by photo setting the white balance manually. Is there a tool like the Match total exposures, but for color balance? I have already tried with the automatic white balance, but the problem is that the decided WB for the photos is not the one I need, and I need to have the same WB for all the session, and this could change from different takes. The difference between shots is usually around 4 or 5 "points" in the Tint scale, some are with Tint +11, some with +15.
Or any other tool that could process this after? At the end I'll use JPGs to create the stop motion, so if there is a tool that could process the exported jpgs it could work too.
View 2 Replies
View Related
Apr 2, 2003
best way to balance the colors in images that are used on a web-site? If there are like 20 different images, but you have to have a certain 'feel' to them all. I've tried with Hue/saturation, color balance etc., but I never get the same effect for different photos. What I'd need is a matching mask or something.
View 5 Replies
View Related
Dec 17, 2013
How can you balance a heavy auger?
It can vary from 8ft to 12ft long 24inch diameter 3/8 to 3/4 inch flighting.
No problem doing a static balance but when it is rotating its off balance end to end and shakes the equipment its on.
Not only is it hard to figue out how much weight to add but at what l degrees.
I do know the weight has to go on the ends .It there a way of getting it close with the simulator and if it is how do I go about it?
View 3 Replies
View Related
Sep 16, 2013
I take RAW photos using Canon DSLRs and I use to edit CR2 files.I've just got a brand new Lightroom 5 boxed with my new 5D camera and started to use it,
When I open the photos in the library or in develop mode I see the photos in good and light colors in the miniatures in the bottom of the screen.
When I double click on a photo, it opens up in a bigger format and it looks also beautiful (in the same way I can see in the photocamera display), however after around 1 second of "loading" the photo changes its colors and it's no more bright and beautiful it changes in more dull colors.
how to keep the camera settings in raw files and edit the photos starting from the edits that the camera made?
View 8 Replies
View Related
Feb 16, 2012
I color tagged a series of photos....with green. Now I want to remove the color labels and have no label at all.
Using LR3, on a Mac.
View 2 Replies
View Related
Sep 3, 2012
How can this possibly happen? The section Apply During Import in the import dialog screen has a field for Develop Settings, but this field says None, so nothing should happen to the photos during import. So why do the display in B&W in Library?
View 3 Replies
View Related
May 26, 2013
I have a question about lightroom. When I exported my photos they turn my black & white to color. What did I do?
View 1 Replies
View Related
Nov 14, 2011
The photos I edit through LR do not print the way they look in the develop module. I have calibrated my monitors and I am printing in photo mode on my Epson printer. The same printer produces accurate color for photos that have not been treated in LR. I am using the free trial version of LR.
View 1 Replies
View Related
Jan 13, 2013
Is it possible to do color splash in black/white photos using Adobe Lightroom 4? If so, how?
View 1 Replies
View Related
Dec 9, 2013
When I update my photos in LR 5 from the disk it drops my color label.
View 4 Replies
View Related
Sep 6, 2012
How to change the keyboard shortcuts for applying Color Labels to photos? I have Keyboard Tamer, and I was able to remove the shortcuts for applying star ratings, but there seems to be no way to change the commands in Photo > Set Color Label.
See, many times a day I will click the white balance color temperature fileld and start typing "5500" only to then realize that the click on the entry field didn't activate it and I have now inadvertently changed the ratings and/or label colors for several photos. Super frustrating to then have to undo a bunch of times, especially when I'm viewing based on rating and/or color label, because photos can spontaneously vanish from view.
View 2 Replies
View Related
Mar 12, 2005
I've played around for some time trying to duplicate this effect and can't seem to get the right combination. Does anyone have any ideas how it could be done?
View 6 Replies
View Related
Dec 28, 2011
My camera and clipping plans are inside the walls yet it renders whats behind it!!! in the camera viewport i see the elevation and everything correctly as i want it to be ,but when i render the view i get the outer wall which is behind the camera!
View 2 Replies
View Related
Aug 18, 2011
Would I be correct in assuming that an HDR map is useless in an interior scene with no outside light source (but interior lights would be used)?
View 1 Replies
View Related
Oct 2, 2012
I'm unable to drag a group of photos or even single photos to a publish folder. In this case it's SmugMug. What is the correct method?
View 2 Replies
View Related
May 28, 2013
I copied photo folders from my hard drive to lightroom 4 and edited them but then accidentally removed these folders from lightroom. I then imported these folders again into lightroom but all the edits I made orginally in lightroom don't show up for the individual photo's.
I backed up the Lightroom catalogue regularily. Is there any way I can reattach these edits to their respective photos'. There is lot of photo's involved.
View 2 Replies
View Related
Feb 13, 2014
When I merge LR5 catalogs the existing photos are overwritten by the incoming photos
View 1 Replies
View Related
Mar 10, 2011
The attached example shows an enlargement of a object that represents the result of a scanned hand drawn shape.
I would like to be able to click one of these objects and apply a fill to the interior. I have too many of them to create a companion object for each and align it.
View 9 Replies
View Related
May 16, 2011
How can I find interior vertexes ? I modelled character in 3DS Max 2011 and exported for Mudbox .But mudbox shows this error :
Mudbox has detected problems in the imported mesh
View 1 Replies
View Related
Apr 11, 2012
I'm rendering and interior and I am using a sky portal over a door. As you can see from the attached image I have 2 problems. I can't upload the whole image for client confidentiality
You can see artifacts on the wall and ceiling. I have up the sky portal shadows to 128 and it has improved a little bit. If I keep raising this the scene will take too long to render. I am using FG medium setting and GI default settings.
The second problem it is very over exposed. I am using MR physical Sky. I put an image in the custom background and played around with the output setting but I still can't get the image to show.
View 3 Replies
View Related
May 18, 2012
why my interior rendering scenes just show up black. I have opened up projects from previous releases that I was able to get interior scenes to render correctly and they render fine in 2013. I've imported the modified fixtures to the current projects file and they still don't do anything. The scene I'm talking about has a ceiling modeled on the underside of a floor. I've read this may be an issue, but my light fixtures light source is to be 1/4" above the plane of the ceiling. In my case, it's a 5/8" layer of drywall.
View 9 Replies
View Related
Nov 29, 2011
I rendered an interior scene. It took 17 hours 17 minutes and 35 seconds !!!
I used all arch and design materials. Some are used from material library. I am not really convinced with the output i made. I think there in nothing in the scene that making the render too high.
I m using
Core i7 2600 3.4 GHz 4 cores 8 threads
8 GB ram
1 GB geforce GTS 450 DDR3
win 7 64 bit
3ds max 2011 64 bit
View 9 Replies
View Related
Apr 23, 2012
I have an interior amphiteather with stepped concrete steps and a bottom lower slab, which are recessed and below the ground floor level of 0'-0".
Before adding the topography to the job, the steps layout and the lower salb showed on plan, but since adding the topography, the lower steps and the lower slab do not show. Cutting a section thru the amphiteather, the earth is seem to be above the lower steps and the lower slab.
How can I modify the earth in this interior area of thh building so the earth (and topography) is below the concrete steps and the lower slab? (so these recessed concrete floor elements could be seen in the plan of the building)
View 1 Replies
View Related
May 9, 2013
I am doing a trial of Revit 2014. Usually I get the student version, but I enjoy 30 days with no stamp. I want to do some night renders, and so I dropped in studio lights that aren't showing up at all in the "sun and artifical" render.
I go to adjust the lights with the "Artificial Lights" button and nothing. No response at all. It's like a fake button that just looks like it's being clicked.
View 1 Replies
View Related
Jun 17, 2011
I have 1 question. How to split the segment on interior elevation view?
View 3 Replies
View Related
Mar 31, 2011
New to Architecture, and am having trouble figuring out how to make the exterior of walls a different material than the interior...
View 8 Replies
View Related
Jan 14, 2013
I have one surface (surveyed pts) that I would like to paste onto another larger surface (say a LIDAR or GIS base). The extents of the small surface are entirely within the extents of the larger surface. The small surface does, however, have some interior areas without any data ('holes' if you will). In these areas, I want the paste operation to result in just the original base surface... but the paste operation assumes I want the new composite surface to also have a hole...
Screen shot illustrating attached with example surfaces. Is there a way to paste only the surface and not the holes?
View 5 Replies
View Related
