I have a Eizo ColorEdge monitor that is calabrated with a Spyder3 puck using Eizo's software. I shoot with a Sony A99 and A700 in RAW and use Lightroom 4.4. After editing I export using sRGB JPEGS. My pictures always look overly saturated orange.
View 4 Replies
Went to export a picture, entered the information, clicked " export" and Lightroom disappeared. Recovered it or so i thought. The title bar now reads "Ice caves 2014-Adobe Lightroom 3, and all my pictures are missing.
View 3 Replies View RelatedI loaded some folders with my pictures. In Lightroom I developed some of it, others I did not. Now I want to export only those pictures which I developed. I know, I can manually select at the bottom line all pictures showing a +/- sign and the export them. This is quite a lot of work with my 800 pictures. Is it possible to tell Lightroom that it just selects and exports the developed pictures?
View 2 Replies View RelatedI cannot export pics anymore, when I press the export button the normal screen comes up but slightly different and NO export button...this wouldn't be because I only have 10 days left on the trial period would it?
View 9 Replies View RelatedWhen I move a photo with LR keywords from LR to PSE 9, the keywords do not move with the file the majority of the time. Sometimes the keywords move, but most of the time they do not. Why? Is there a secret, or is there something that needs to be done to assure that LR keywords move with the file into PSE 9.
View 8 Replies View RelatedWhen I export vector graphics to RGB/sRGB and open the pdf in another software (like Serif Page Plus, Adobe etc.), the color values are variying a little bit.
For example, my gray value of a logotype in Corel was 118, 115, 113. Now I export as pdf (many logical!! setting of CM tried!!!), any other software that opens the document - also CORRECT CM settings - values are 117, 115, 112. --- The same light variations nearly anytime with any RGB color. Not possible to create vector pdfs of logos for my clients correctly this way! Really bad.
Instead of starting a discussion about Color Management Settings, could any professional, maybe a Corel member check this behaviour in practice and give me a feed-back!? - In the best case let me know the complete settings for Corel CM and pdf Export to get the RGB pdf export done correctly.
(I am currently using X4, but know that same behaviour from X3 and passed again hours to try really all reasonable CM and export combinations, at least I think so. Windows7 and WindowsXP)
I have started offering the option to buy high resolution pictures to cd. File Settings, Image Size, Output Sharpening - so many boxes and not sure which to check or leave unchecked A couple of the pictures I cropped to 4x6 but the others are all the original as I shot them.
View 3 Replies View RelatedHow do I export a lightroom 4 folder of about 200 pictures to itunes to show on my Apple TV?
View 1 Replies View RelatedI want to use my Ipad 2 to show people pictures that I have taken. I am not certain as to the best workflow for doing this. I store all my pictures on external hard drives and am hoping to avoid bringing processed photos onto my computer hard drive. I have done a search on the forum and have not seen a recommended work flow.
View 3 Replies View RelatedIs there any way to automatically export only the pictures I've enhanced during the develop phase? I was resolved to Ctrl-Click on the ones at the bottom filmstrip that I could 'see' that I had edited (about 15 out of a hundred) and then export to a subdirectory. Maybe someway to filter that bottom filmstrip to only the pictures I've edited/enhanced?
View 1 Replies View RelatedHow do I move images from "Previous Export as Catalog into my pictures folder?
View 1 Replies View RelatedI imported some pictures into LIghtroom 5 with the SAME jpg numbers as a prior import. The first import consisted of pictures from Trip 1 folder on my hard drive, the second import was from Trip 2 folder on hard drive. I see the Trip 1 and Trip 2 folders in LIghtroom 5, but am experiencing problems with emailing and exporting pictures, getting messages such as "Missing file" or "Export does not show up. Were there problems with the import?
View 1 Replies View RelatedI uploaded some mono images from my Canon EOS5D(2) taken with an orange filter. Previous uploads have been fine. This time, after showing the mono images in the catalogue they all convert spontaneously to orange images of various shades - and the images also show colours. The camera setting was correct, on checking, for mono uploads and, in any case, never a problem before. What have I done wrongly - and is there any rescue? Lightroom is v2.7.
View 1 Replies View Relatedhow can you work in adobe RGB and sRGB colours paces in LR 5. Why do my photos in prophoto colour space print so badly on my inkjet computer. If I am using the book module in LR 5 will Blurb be able to print them using prophoto colour spaces.
View 2 Replies View RelatedI have AdobeRGB PSDs and camera RAW files, that I develop in LR and then export for web. Does LR default to a conversion to sRGB? I can't find a tick-box for this. All web images seem to get tagged sRGB, but I'm not sure whether this is a genuine colour space conversion, or merely a re-tagging.
View 3 Replies View RelatedLR works with the color space ProPhotoRGB. With highly saturated colors this colorspace is larger than AdobeRGB and sRGB. As I see it now is that while exporting to these color spaces, Lightroom uses the method as in Photoshop called Convert to Profile, which maintains the color appearance, but shifts the color numbers. High saturated colors will be clipped. Is this assumption correct? Is it possible to use in Lightroom the method Assign Profile, where the color numbers (and detail) are maintained?
View 5 Replies View RelatedAfter updating to LR 3.6, DNG Profile Editor does not display previews correctly, if base profile is one of the "new technology" camera specific profiles (for example the v4 profiles for Nikon). It looks like the previews are not properly converted to sRGB for display.
I also noticed that if I decompile and then compile such a profile using dcptool of Chromasoft, the resulting profile generates very strange looking pictures.
With LR4 and a Nikon D7000.When i import that raw in lightroom, the first view of the picture is fine then LR do its "loading" and bang, the picture changes.As RAW is not supposed to be affected by the colorspace My understanding is the embeded preview in the raw is sRGB and LR work in a different colorspace. If i change the camera for AdobeRGB, i dont have the problem and what i see from the camera to the preview then the final result is consistent.But this cause me another problem because i shoot RAW+jpeg, the backup JPEG saved in the other memory card is now AdobeRGB as well and less compatible as everybody knows, for web, print labatory, etc...
I dont have in LR any automatic developement settings.My screen is calibrated with a Spyder 3.
I'm feeling stuck in the corner as i want by backup JPEG in sRGB and n o colorshift in LR.
I have a set of JPEGs that have been stripped of their color profiles (AdobeRGB). Lightroom assumes that they are sRGB images and displays them incorrectly. Is there any function in the program that will let me embed the correct (AdobeRGB) profile to the photos, preferably without re-compressing them?
View 12 Replies View RelatedWhen I am going through RAW files from my Canon cameras (1Ds MkIII and 6D) I edit them in the develop module and then convert to aRGB or sRGB depending on the output media. They look good in aRGB and sRGB too when I take into account the limitations of sRGB.
---> However, if I try the softproof to aRGB or sRGB the resulting proof crushes dark tones into solid black. Why is this when the actual conversions are way better? The actual conversions look good in both LR and PS CS5.
I have also noticed that when I upload images to my online galleries and view them with Firefox (latest version and color management enabled for all rendered graphics) they appear darker in the darkest tones than what they appear in LR. What gives?
- - - - - - - - -
Further info:
I am using LR 5.3, no updates suggested by the softwareWindows 8.1 clean installThe computer is a new one, fast processor, 32 gigs ram etc.Eizo CX270 hardware calibrated (16-bit internal LUT) with the Spyder 4 in ColorNavigator 6 software.The issue has always been like this
I am trying to download pictures in folders and sub folders into the LR catalog. The import brings all the pics in the subfolders over but when II click on the parent folder it shows not pictures or number of pictures in it.
View 4 Replies View RelatedI imported pictures to Adobe Lightroom and exported them to my memory card. Now my memory card is broke! Is there any way to retrieve those pictures from Lightroom. Right now they are saying missing.
View 6 Replies View RelatedHow do I convert the colour profile of a Lightroom custom printing package from Adobe Prophoto to sRGB before printing? For that matter, how do I save the thing? I have no interest in saving the template, or the collection separately, since neither has any use without the other. And without saving them as one finished item, I have no way to convert the colour profile of that item. I can see clearly from the appearance of the print preview that the above mentioned colour profile conversion is required.
View 1 Replies View RelatedI have an iLogic rule that asks if I want to export a DXF (yes/no) every time I save an Inventor DWG. In some of our drawings we have pictures and those don't get included in the DXF export. Can DXFs handle pictures? How can I have it include the picture as well?
View 7 Replies View RelatedIn photoshop, my orange looks like red! I really have no true color of red what gives?
View 1 Replies View RelatedHow I can remove orange tone of a photo taken by night? A random example from google images:
View 1 Replies View RelatedI took some pictures inside a church recently and a few came out perfect, but the rest had an orangey coloured tint to them.
way of removing this, either in Elements or CS3
i started a v2 of my portfolio site. At the bottom of the page there is javascript to chnage the back gound 4 different colors which all look well with the page. Just a opinion on how it looks so far. I just ordered a new digital camera so once i get that i will have a few photographs with a hue of a darker orange to the left of the text that will be in the content box. As of now it lays blank.
View 2 Replies View RelatedWhen I export RAW files, specifying that I want the output to be in sRGB color space the resulting files have the Adobe RGB color space. The same is true if I specify I want them in ProPhoto. Is this a bug? I have done it successfully in other versions of Lightroom, but not in 4.3.
View 21 Replies View RelatedWhat does an orange line between the timeline and the chapter / cue marker line indicate. (see picture below).
I am halfway through a project and suddenly notice this orange line that wasn't there before. I've looked through the documentation and see no mention of its meaning, and what I did that triggered it to show up.
I am using Photoshop CS3.
My wife gave me some old photos that have turned Orange over time.
Do you know how to get back to the right colors.
