Lightroom :: Orange Filter Colour Comes Through On Images Loaded To Computer From Camera
Mar 11, 2012
I uploaded some mono images from my Canon EOS5D(2) taken with an orange filter. Previous uploads have been fine. This time, after showing the mono images in the catalogue they all convert spontaneously to orange images of various shades - and the images also show colours. The camera setting was correct, on checking, for mono uploads and, in any case, never a problem before. What have I done wrongly - and is there any rescue? Lightroom is v2.7.
View 1 Replies
ADVERTISEMENT
Dec 19, 2011
I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies
View Related
May 17, 2012
My cursor/cross-hair suddently changed from Green to Orange. I don't know what it does to my drawing. I did not play with the settings... How do I get it back to green?
Capture.PNG
In addition, I also noticed that I do not get a textbox next to my cursor while typing commands. I love to have this back. How do I get it back? This affects me a lot as I can no longer see my scale factor and alike...
View 2 Replies
View Related
Apr 8, 2012
I have been using the Dark Strokes filter.. now suddenly when I go to apply it the image is turning orange. My foreground & Background colors are set to white and black.
View 11 Replies
View Related
Oct 3, 2012
Can I have the RAW files record onto the camera CF card and only the small jpegs go into the computer?
Want to shoot RAW but need the tethered computer to not slow down with ingesting huge RAW files.
View 7 Replies
View Related
Jan 22, 2013
when importing photos (raw files) to Lightroom they look very different than in the camera. At the very beginning photo looks more or less the same and then, a message „Loading…” is displayed and in a result the photo looks differently. It looks like with imposed dimmer yellow/red filter, higher contrast, much lower sharpness and what is most important, they are all overexposed sort of. The screen settings are as sRGB, ICC profile: sRGB IEC61966-2.1. I am using DSLR Sony A700 that save photos in ARW format, Lightorrom just updated to version 4.3 .
View 1 Replies
View Related
Jun 13, 2013
The new colorfringe correction method in Lightroom 4.1 RC2 works fine even for difficult longitudinal CA when used with care. After basic adjustments I normally export my raw file to CS5 for further editing.However found out that even after the Camera Raw update to 6.7 RC my Lightroom colorfringe adjustments were not transfered to CS5.
: but do we require to buy CS6 with Camera Raw 7 to open the raw image with Lightroom corrections for colorfringes maintained?
View 17 Replies
View Related
May 30, 2013
I often shoot with 2 cameras to save me changing lenses fequently. However, after I've uploaded my images into LR3 and switch to the 'Develop' module, the images are mixed up (I assume they are ordered by time taken.) How can I filter them by camera model in the image strip at the base of the module? Also, how does the 'Camera Info' option filter? And can it be set?
View 2 Replies
View Related
Jun 24, 2011
I am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
View 1 Replies
View Related
Jul 9, 2012
Camera Raw import filter for Nikon D800 NEF files in LR 3.6? I believe LR 4.1 supports this file type natively, but I am not yet ready to update to 4.1.
I can, however read these files in Adobe P-Shop CS5 and Bridge CS5.
OS: Windows 64)
View 9 Replies
View Related
May 11, 2013
camera raw filter does not show up on the filter drop list on CC. I am trying to determine why this is the case. So far everything else seems to work.
View 2 Replies
View Related
Nov 20, 2013
I cannot export images from LR to computer. It tells me there is not enough memory, but I have 60gb free
View 3 Replies
View Related
May 27, 2013
when i tranfered images from my laptop to my desktop ( b oth have LR) the adjustments and tags did not transfer with them.
View 1 Replies
View Related
Oct 8, 2013
I do not have the Camera Raw filter in my filters menu, and I've just updated Photoshop this AM.
View 1 Replies
View Related
Aug 19, 2012
I would like to use LR on a second computer. My photos are stored on an external hard drive. How do I import the images onto the second computer through LR and keep the changes that I have already made. I tried and the images were in their original state.
View 1 Replies
View Related
Jan 15, 2013
I am importing my images to another computer. When I did this all the adjustments that I had made to my images in Lightroom are gone and the filter notes.
How do I import these images and not loose the work I have doen to them?
View 1 Replies
View Related
Dec 13, 2012
Something went wront on an ingest of my images. I think I tried correcting it by going into my /workingfiles folder were they were stored and deleting them manually. I'm sure I checked to see if I could do it through Lightroom, but maybe I missed the folder they were put in. I am guessing that is what happened so Lightroom still has a small image of them somewhere and will no longer let me re-import them.
Image Ingester Pro 3
Lightroom 4.3
Windows 7 Home Premium 64
View 7 Replies
View Related
Sep 17, 2012
I have a big collection of scanned photos many of which are in b&w. Unfortunately they have not all been tagged, so now I'm looking for an easy way of finding all my b&w images.
Can this be done in LR?
View 5 Replies
View Related
Nov 28, 2011
I'm looking to filter on images that have been modified since the import. The modification could be within lightroom, or external. I have a filter setup for external files, but I can't figure out what filter to use to show files that have been modified inside lightroom.
Hopefully my request makes sense. I find I am making more changes in Lightroom (3.5) these days, and would like to filter (without setting flags/stars/colors/...) on images that I have already modified. Is this possible?
View 7 Replies
View Related
Apr 24, 2013
Is there a way to filter images before importing them in Lightroom?
ScenarioI work with an extensive image collection stored on a server. The images contain a full set of metadata, including keywords and more. When I work on a specific project, I import the images into a Lightroom collection. That way I can easily review, rate and add additional keywords to those best-of images.
The challenge is that the images I want to add are from numerous folders. Plus, I often only want to add some images from those folders (not the entire folder). This collection process can be very time consuming -- manually locating the images and checking/unchecking the ones I want and repeating the process for the different folders the images reside in.
The process could be greatly simplified (and a lot faster) if I could filter/search for images that contain key words or other metadata to find the full set of images I want to import.
The key is that I’m not using a workflow to simply import all images from a memory card or download folder. I’m working from a large collection of existing images and want to import a subset of those images.
View 2 Replies
View Related
Dec 4, 2011
I am interested in shooting with my D700 and lightroom 3 tethered. Is it possible for the image to be recored both on the card and on the tethered computer?
View 2 Replies
View Related
May 25, 2013
I've selected around 300 images from an intial shoot of 1200. I've assigned a star to the selected 300 and developed a colour image of each. Now, I need to make a BW version of each of the 300 images
What is the simplest way to do this? I have tried to make virtual copies of the selected 300 and assign 2 stars to enable me to keep the original 300 in colour and work on the soon to be BW versions, but when I do this I can only make a single virtual copy at a time. I'm sure it must be possible to select all 300 at once, and make 300 virtual copies somehow.
Is there a simple video demonstrating this workflow somewhere?
View 3 Replies
View Related
May 25, 2013
When selecting a keyword to filter images, is there a way to also filter out photos so it just shows videos?
View 3 Replies
View Related
Jan 27, 2012
I have 30.000 photos accumulated over the years, several are useless (too dark, too bright).I need to delete them.
How can I select all the images which are either too dark and/or too bright?
Mathematically this would be relatively straightforward: filter images where the majority of the pixels are black / white.
View 21 Replies
View Related
Sep 25, 2012
is there a way in LR (or bridge) to filter all images that are saved as 16 bit images.
i noticed i have a lot of scanned photos/slides that don´t need to be in 16 bit TIFF format.8 bit is enough for them and would save me a ton of HDD space (even when most of them are LZW compressed).
but i need a way to find them in my 80000 images database.so that i can make a further selection which of these 16 bit images i can convert to 8 bit.
View 7 Replies
View Related
Jul 28, 2013
I can't download any images with Lightroom 4.4 from any of my cameras, NIkon NEF, or Canon IMG, or Sony DSC images.I used to download all my images with the previous versions...3.0 I have Mac 10.7.5.
View 2 Replies
View Related
Oct 25, 2012
I used to use Photoshop Elements and that adds a keyword to its catalog showing which camera took the image. Lightroom doesn't seem to do this. I recently bought a new camera and non of the images imported from it have the camera name as a keyword. Is there an option, which I have overlooked, that will force Lightroom to add the camera name as a keyword to images?
View 3 Replies
View Related
Apr 1, 2012
How do I see a tagged image from the camera (tagged using the lock button, to remind me of a image I want to find quickly) once imported into Lightroom? This is possible to do in Photomechanic, as I can see all of the tagged images from the camera once opened in Photomechanic. Yet so far I have not found a way to allow me to do this in Lightroom so far.
View 2 Replies
View Related
Apr 13, 2013
I have been importing and editing photos from a Canon Powershot S3-IS and never had a problem until today. This is the first time I've tried it with the latest upgrade to lightroom.
I first tried importing from my camera memory card slot. Lightroom froze. Then I tried using my card reader and inserting that in the USB slot. Lightroom froze. I tried to connect the camera directly to the computer with the USB cord. Lightroom told me that it could not import the files.
I tried importing the images to my computer and then from my hard drive copying them into Lightroom. That worked. Is the camera too old to use with the latest update from Lightroom. I would think a jpg. file would be pretty standard. how to import to Lightroom without the extra step?
View 3 Replies
View Related
Mar 15, 2013
I have not been able to find why multiple identical images are displaying in gridview when filters are applied. There is only one image in the folder. This obviously makes it difficult to apply images to keywords.
View 5 Replies
View Related
Mar 1, 2013
I have just moved from v3.6 to v4.3. When using the library window, grid view, I use the filter bu selecting a specific date but images are being returned incorrectly. For example: When I select a date i.e. 25/05/2011, I have images being shown for that date but also others with a capture date of 06/02/2012. How can this issue be corrected? I have over 60,000 images to review.
View 17 Replies
View Related
