after rotating a line to make it diagonal, how do you check the degree that it is diagonal so it can be replicated with other lines? It does't show this in Info or Transform Panels.
View 3 Replies
To summarize: It seems that compounding a path resets the rotation of the gradient to it's original degree of rotation.
Detailed version:
1. Create a shape.
2. Add a gradient fill. Note it's degree of rotation. Let's say it's set at 10°.
3. Now rotate the shape by any means (transform or rotate tool). Note the gradient degree of rotation has shifted the same amount as the shape was rotated (if it was rotated 50°, the gradient will show at 60°).
4. Make it a compound path.
5. Instantly the gradient shifts back to it's original degree of rotation of 10°.
It appears that when rotating a shape with a gradient, the rotation of the gradient is locked to the rotation of the shape. But when making it a compound shape it releases that lock and "remembers" it's original state. But that is only true as soon as you make it a compound path, but if you no go ahead and rotate it just a bit using the cursor (as opposed to selecting transform > rotate), the gradient will switch back to how you would expect it to rotate in the first place...
Workaround would be to make it a compound path before rotating the shape at all.
This might be more of an Acrobat question, but is there an easy way to check the resolution of an image that was done in Illustrator and is now sent to you as a PDF?
View 5 Replies View RelatedI am having problems with zoom, pan and rotate at high zoom level. The movements becoming jerky and delayed. But for whatever reason the problem exists in some assembly files and not in the others.
View 9 Replies View RelatedI noticed that Revit likes to show the entire stair going down. This works for me in a lot of cases but I have a project that the second floor is showing the stair all the way down to the first floor, and there is another stair going from the second floor to the third that I really need to see.
Plan regions don't seem to allow me to add a break line below the second floor and see the stair from the second to the third floor. The floors are on and the view is set to hidden.
The attached png shows the up stairs in blue that I would like to see and the Down stairs I would like to cut at the landing.
Why are my Level Lines highlighted green?
Also why do some of the level symbols appear blue?
Searched and find, how to change the colors of the types, not why they are displaying in other colors than black.
How can I revised the line type so that the text reads in the same direction. The linetype text auto adjust to read correctly in Model Space. However In the plan and profile drawing the site is rotated 90 degrees so when the text changes direction from northwest to northeast and the line text changes direction. I need for the text to be in the same direction the entire length of the line.
View 1 Replies View RelatedThe project I am working on includes revit data produced from a point cloud. The file I was given has two levels. The first level is fine however; the second level is set 1 foot too high. When I adjust the level elevation (drop it down by 1 foot), all of the elements associated with level two move with it. What I want to do is move the level line without adjusting the associated revit items.
View 3 Replies View RelatedHow to show the level of cut on the profile as reference line automatically?
I’m wondering if there is a way to show the level of cut automatically on the elevation view.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
There are a ton of lisp to match text rotation to a selected line, but not vice versa.
View 9 Replies View RelatedWhen setting up a simple FK control curve on say the wrist for example, many times the control curve isn't exactly perpendicular to the local rotation axis of the joint movement, so when we position the control curve to be perpendicular to the joint - it has a rotational value added, but the rotational handles are lines up with the rotational handles of the joint that we want to move.
Freeze Transformations: then the control curves rotational handle go back to being skewed (out of alignment with the joints)
We want to Freeze transformations before constraining the curve, but we'd really to keep those rotations control handles to remain aligned with the joints rotational handles. This will make it an exact control when animating - grab the rotational handle of the curve, rotate it, and the joint will move exactly in the proper direction.
how to get the rotational handle of any control curve to run perpendicular to the shape after freezing transformations?
I am making a template file having title block with fields. I use this template for creating layouts and sheets using Sheet Set Manager and the fields will be updated from the data of SSM. Now i would like to add a dynamic north block to my template. The block could be rotated (i have this block in file itself) and rotation angle could be inserted. Now how can i add a custom field to SSM so that i could set a rotation angle for the project and thus every new layout or sheet created using the template has the north block rotated with the angle mentioned in SSM.
Here is the file...........
I am having a little trouble with some doors showing up on the level 1 door schedule that are actually on level 2. They are curtain wall doors.
View 6 Replies View RelatedI am trying to adjust the noise level with the level tool but its not working. I move the arrows every which way see that it changes. I get it to were i want it them press ok and it only changes a little bit.
It become what it was in the preview. The level tool works when I add it as a new adjustment layer but I don't want like that I want to be able to copy the new level of noise I just made and can't if I add new adjustment. what should I do to fix this? O and this is the trial version and It wasn't working earlier with lots of other tool but i uninstalled it and now they are working except the level tool how I want it to.
I want to rotate a drawing in my paper space, but without rotating it in model space. So that I still can work on it easily in model space.
View 9 Replies View RelatedThe underlay does not show up for Level 1 when I am on Level 2, but it does show up for Level 2 when I am on Level 1. the underlay option is on for Level 1, so I'm not sure why it's not showing up. I am using Revit 2014.
View 1 Replies View RelatedI have a North Arrow that I would love to make into a dynamic block. I would like to be able to rotate the N that represents where the north direction is. But while rotating the N around the center of a circle I would like the letter itself to stay un-rotated. It seems simple, if I rotate the letter around the axis of a circle 90 deg, I would like the letter itself to rotate -90 deg on it's own axis. Of course this is easy to do manualy, but how do i do it so that rotation 1 automaticaly triggers rotation 2?
View 9 Replies View RelatedI have some problems with rotation in Illustrator CS5. I created the logo and after that i need to make another position of entire logo on 90 degrees (vertical). But when i rotate the objects i have distortion effect only on that part where i use 3D effect.
View 2 Replies View RelatedI've just rotated an artboard to portraight from landscape, then selected all the guides and transform rotated them 90 deg. With this method all the guides need to be readjusted for corrrect positioning
Is there a way to reorientate the artboard with guides in place?
Previously, every time I selected an object (line, shape, text...etc) the program gave me an option to rotate or change the size of the object by creating a square with four points around the selection. I could then click and drag a corner of my selection thus rotating it and/or changing it's size.
Now, for some reason, this feature has been disabled and the only way I can manipulate the object is by physically typing in a new percentage for it's size or by going to the Object>Transform Menu. Did I accidentally hit a key command that disables this feature?
Not sure how I did it, but my grid (not the perspective grid) is now slightly rotated on my artboard. How can I undo this rotation?
View 3 Replies View RelatedI learned out to make the tick marks using copies and rotation. My question now is, how is the rotation calculated so A) I get the correct placement of the tick marks, especially the small ones as there are so many and B) how do I calculate the rotation degree so that I have the proper amount of space at the bottom of the guage/dial?
I know how to get the large tick marks and the small tick marks, if I were placing them evenly around the entire circle, I would know how to do that also - but since I'm placing them around only a portion of the circle (although still evenly) I'm lost. I can only figure out the space by hit and miss calculations and that is taking much too long. I would also need to know how much to rotate the entire thing by in order to get the open space at the bottom as shown.
It seems as though the axes in my Illustrator CS4 installation are rotated. Whenever I create a new object, the new object is rotated about -5.2º. When constraining the rotation of objects, the rotation is never square to the document edge. How do I fix this?
View 2 Replies View RelatedI wanted to ask if by chance any of the scripting gurus here happen to have written an AI script that will take a number of selected sublayers/sub-sublayers and move them so they become top-level layers?
I am really needing this very badly, given that After Effects can only handle AI layers as separate entities. So I find myself moving tens, even hundreds of nested sublayers to the top level all the time.
Is it possible this script exists already?
I'm trying to use Illustrator CS5 (as well as Photoshop CS5) on my Lenovo X61 Tablet (running Windows 7 32 bit) in 270° screen rotation (I think this is called secondary portrait mode in windows?), but my X and Y cursor positions are inverted. This means if my stylus is on the left half of the screen, my cursor will be on the right side, the same distance away from the right border as my stylus is from the left. Likewise if my stylus is somewhere in the top half of the screen, the cursor will be somewhere in the bottom half of the screen, the same distance from the bottom border as the stylus is from the top. The only time the cursor and stylus positions match is in the dead center of the screen.
The stylus is working properly in other applications in this screen rotation, including InDesign CS5 (the only other Adobe product I've tried with this), just not in Illustrator or Photoshop.
using AutoCAD 2009 (vanilla)
I got too smart for myself today in bringing an old drawing up to current standards...Everyone seems to want their block attributes to be zero - I have blocks where the attributes are best when they match the rotations of each blocks.
I have an old drawing that was rotated (as it should be) at approx 2deg.
I used a lisp routine to global edit all the blocks that needed to be at zero. BUT for some reason (and after hundreds of blocks were corrected), I noticed I now have two blocks that should NOT have been in the set have had their attributes rotated to zero....and the attributes should be at the same rotation as their block's rotation.
Because those two blocks have a fixed tic mark, I can click on the mark to see what the block rotation is, then rotate its attribute to that rotation, but I have hundreds of blocks! One-at-a-time sucks....
Any chance there is a GLOBAL way to edit an attribute rotation to match its own block's rotation?
Say I have an image where I'm attempting to extract a mask from and I've found that one of the channels will serve as a good starting point. Further suppose that I have found that I want to increase the luminance level of pixels in the range of 60 - 65 by 10 luminance levels each:
i.e. all pixels with luminance values of 60,61,62,63,64,65 would, after the operation have luminance values of 70,71,72,73,74,75. Is such a thing possible with Photoshop?
Picture this:
I have a project: project.vsp
I have a file: d:file.avi
I click on "project.vsp" the program starts and i should just be able to render it.
However
The file ("d:file.avi") is frequently rerendered. It has the same resolution, and duration, but the content is new.
Every time i click on "project.vsp" I am told that d:file.avi is missing (even though it isn't) and I have to relink it or skip.
Isn't there some way to just get the program to load the file without bugging me?
It seems if i go to preferences and uncheck the relink setting, the program will instead just skip the file and not load it - which is not desirable..
I have a list of Layer Names in a text file. How can i check the Layer Names in the autocad drawing file with the list and log all the errors in a notepad.
View 2 Replies View RelatedI should be able to apply an effect to a line that has been made with the line tool. Why is this not working?I thought that maybe I might have disabled Effects somehow, but I can't think of anything.
View 9 Replies View RelatedI am using live paint to paint cartoon character illustrations. The artwork is brought into Illustrator CS3 and live traced. Then I convert it to a live paint group and use the paint bucket to fill. Everything looks fine no matter how much I zoom in. If I bring the AI file into Photoshop CS6 I can see a thin white line between the black line art and the fill. This is most noticeable where black meets black. I can also see this sometimes in file previews while browsing through files. If the white line cannot be seen in Illustrator is the file ok? I did just upgrade to CS6 if that would make a difference.
View 2 Replies View Related
