GIMP :: How To Enlarge Space Where Object Sits
Jun 9, 2012
Im trying to tear a dollar bill in half...I know how to do this and accomplished it with ease in gimp but theres one problem.
When I split the dollar bill, and I move each piece upward, the bottom corner of the dollar bill hides behind something...I think its the actual picture perimeter.. I hope this makes sense...basically the dollar bill is to large..when I move each piece of the dollar bill, the corners of the dollar behind fall behind the frame I guess or the perimieter of the picture. I tried resizing the layer but that didn't seem to work. Is there some way to enlarge the space where the object sits. I tried scaling and it doesnt make a difference either..
View 1 Replies
ADVERTISEMENT
Oct 10, 2013
How do I go about selecting an object in a photo, enlarging it and then repositioning it in the same photo?
View 1 Replies
View Related
Oct 12, 2012
I feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies
View Related
Jan 5, 2009
What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies
View Related
Oct 20, 2012
I am trying to enlarge a picture, which is the easy bit. However, whenever I reopen the file after saving it, it has reverted back to its original size!
View 1 Replies
View Related
Sep 28, 2012
Took photo over skype. Other computer involved was a mobile phone. Photo very tiny. When try to enlarge, it blurs and pixilates. Any suggestions as to how to enlarge and have a decent photo. I am using Gimp 2.6.Attached File
(s) MVP.png (39.15K)
Number of downloads: 7
View 4 Replies
View Related
Feb 27, 2011
I am a new Gimp user and have just started working on my first project with this application. Unfortunately, I ran into a roadblock almost immediately. I am unable to make text any larger than 30 PX. I can enter larger sizes than this in the Text Tool window, but any value greater than 30 has no effect. It doesn't matter whether I am trying to change existing text or am setting up the Text Tool for entering some new text. Selecting different units for the text size makes no difference in the maximum text size.
Gimp 2.6.11
Mac OS 10.4.11
View 2 Replies
View Related
Jan 4, 2012
I am a new user of GIMP on a late 2008 MacBook Pro with Leopard (10.5.. I am trying to work with an image by applying filters however the image in the filters dialogue box is so small, it's almost unusable. How I can enlarge a portion of my pic in this box to more accurately alter it?
View 1 Replies
View Related
Sep 1, 2012
I have an image that is quite small, cropped from a larger image. I want to enlarge it to 317 mm wide keeping it in proportion.
Using the scaling tool I changed to mm and increased width to 317mm this leaves me with a 'window' into the top corner of the image.
I then used 'fit canvas to layers' and the canvas increases in size ok but it is empty (little grey squares) except for the top corner showing the small window into the image!
If I click on it with the resize tool I can see the whole image enlarged but as soon as i click on the 'scale' button it vanishes again and leaves the small window again?
View 4 Replies
View Related
Apr 12, 2012
I want to enlarge a small photograph with the zoomtool.And when I try to save it on the desired percentage of 100% or so it returns back to it's original size ;After I have saved it as a new copy (image) with a new name.I have tried all the possibilities to save it within the larger size. Even by printer. Everything was in vain.But once it is transferred to the documents files it goes back to the original size.
View 4 Replies
View Related
Apr 14, 2011
I know how to change this in illustrator is it possible in draw?
I want to be able to specify the line weight of a path to be either centred on the path or inside/outside the path. How do I do this?
View 2 Replies
View Related
Mar 25, 2013
In elements 11 layers is there a way to create a white mobile template that sits over a background picture? I need to create a white boarder around a standard 4x6 picture, to create a picture with very specific dimensions, to expedite the trimming process on the final print. This "mobile white template" would allow me to select part of the picture. This White boarder would act a little like a mobile picture frame.
View 1 Replies
View Related
Jan 9, 2013
I'm a long time user and fan of Corel Draw; are there any plans to mimic Adobe when you draw and move a primitive in Corel Draw.
I love the feature in the Adobe Suite that lets you start a selection or primitive shape and dynamically move and place the shape as you'reinitially marking out it's width and Height "by holding down the space bar". I find this less constricting as you can begin draw the shape from anywhere on the page and move it anywhere before you commit to the size and placement.
View 14 Replies
View Related
Jan 27, 2012
When the wind space warp is used, what series of mathematical equations or algorithms is 3ds Max invoking to generate motion based on an input force, turbulence value, etc.?
Are traditional fluid dynamics equations embedded into the calculation process? Is there any way to specifically see how the wind force (strength) and turbulence are interpreted to cause the modeled motion?
Is there any way to switch between wind force (strength) and wind velocity?
Lastly, if one were to have an object billowing in a breeze, is there any way to track the coordinates of a vertex at each point in time? The closest I've come is manually extracting the object's box dimensions at each interval - I would prefer to track how a fixed point on the object moves over time.
View 3 Replies
View Related
Apr 2, 2013
Inside 3D Studio max, its possible to adjust the pivot center of an object to anywhere in space. So if for example, I've got a sphere in my scene and I want to have a bunch of cones spin around the center of the sphere (to create the basic shape of a sun graphic) I can just change the cone's pivot to be in the exact center of the sphere and then when I rotate and copy the cone, they will all be perfectly centered around the sphere.
Tying to do this in Photoshop however is proving rather difficult. Since the triangle representing the sun's rays is smaller than the circle representing the sun, I can't move the traingle's pivot to match the center of the sun because the bounding box for the transform isnt big enough.
If I duplicate the sun and merge the triangle and the sun together, the merge action re-adjusts the pivot to be in the center of both objects so its no longer in the correct center of the circle. I can however move the pivot point to the approximate location now because the bounding box is larger, but I don't need the approximate location, I need the exact location.
Is there a way to move the pivot to a specific coordinate? Or am I going to have to move everything onto a perfectly square canvas and snap everything to grid lines?
View 4 Replies
View Related
Jun 24, 2011
I used an example to represent a more complex animation that I am working on. Basically I have a block moving in vertex space because it is morphing.A proboolean cut has been applied to the block with a diamond shaped object, so that as the block morphs through space, it is being cut by the boolean operand (diamond shape object).
However, I want to achieve an outcome that when the object moves through the boolean cutting operand, whatever geometry that has been cut, stays cut and removed. So in a way, the boolean cut operand object acts as a "geometry eraser". Obvioulsy I would like to be able to control this behaviour too (soft selection, animating boolean cutting operand).
Is this achievable? Or do I have to look at another set of tools/modifiers?
View 4 Replies
View Related
Jun 28, 2011
How would I find the translation of an object in world space? according to the documentation, translate is not -queryable... once I freeze transformation of a sphere theres no way for me to find its world space, but it still Has a world space because its at a location in the scene.
View 1 Replies
View Related
Jan 11, 2013
When using the 'space generate' option when inserting a space, the tool automatically turns off 'object snap' and then of course it doesn't turn it back on at the end of the operation. I tend to need to switch back and forth from auto generate to polygonal insertion and having to reset object snap every time.
View 3 Replies
View Related
Oct 9, 2013
Is there a command to split a space object?... if so, what is it?
View 2 Replies
View Related
Oct 3, 2013
Is there any way that i can stretch an Obj that was created as a block right in model space? in another word i usually right click on the block and go to the block editor and stretch inside the editor, i don't want to do that i have reference point in model that i want to snap end point to the reference. As in the pic i want to stretch the right leg to the right 7.5 in.
View 7 Replies
View Related
Mar 29, 2013
Can i scale a 2D object to an exact length and width that i need to fit into a space?
Ive been reading around online and they say use scale/ref, however i noticed by giving the ref length, it does lengthen the object to the ref length, but the height's off!
View 9 Replies
View Related
May 10, 2012
Basically I have drawn some lines, arcs and splines in the 3D space, then I created surfaces between these lines, arcs and splines, thus I created an 'object' which is defined by all these surfaces.
And what I want to do now is to fill up the empty space and basically convert it into a 3D solid object.
Another example would be a loft 'object', and it creates only a surface, so may I somehow fill up the empty space and turn it into an object?
Drawing2.dwg
View 9 Replies
View Related
Apr 22, 2013
I need to remove a picture of a horse in the background and replace it with a picture of a fence similar to the rest of the picture. I know how to erase the image using the lasso tool and the magic wand. How do I clone part of the background to replace the erased image and then blend the two pictures together?
View 7 Replies
View Related
Sep 7, 2012
I am copy clipping some objects, and then pasting them back into the drawing as a block. At first everything worked fine, now when I perform that routine, and paste back into the drawing, it inserts it way off in left field. What parameter did I upset now?
View 1 Replies
View Related
May 2, 2012
We've been working with adding schedule tags in paper space for objects nested within an xref. The first time you do this however, the manual properties (it seems) do not update if the value of the manual property is changed back in the xref dwg. However, the Automatic properties do seem to update.
When we initially found this we past it off as a limitation. However, one of our users was experimenting and found that the first time you tag the xref resident object... the schedule tag reads the correct manual properties value. However, If you remove the property set from the schedule tag... then the manual property will update correctly showing the current value as it is back in the xref dwg even if it is changed.
This makes complete sense as the manual property set data can be edited from either the tag or the object or from the schedule... IF THE TAG and the object are resident in the same drawing file - in this case you DO NOT want to delete the property set from the tag... if you do this the property set is also removed from the object. However, when tagging objects nested within an xref, then you need to remove the property set from the tag... THEN the manual property will update correctly.
View 2 Replies
View Related
Dec 18, 2012
I am trying to create a property definition that will display the elevation of a space object. I looked through the automatic properties and did not find anything that looked like the elevation.
I have tried the following but was unable to achieve any success.
RESULT="--"
On Error Resume Next
Set AcadApp = GetObject(, "AutoCAD.Application")
Set Obj = AcadApp.Activedocument.Objectidtoobject("[ObjectID]")
RESULT = Obj.elevation
That formula does work if i swap elevation with say height, width,length or any of the properties found in the automatic property list that are a single word. I know the elevation is there I just don't know how to access it.
View 2 Replies
View Related
Feb 25, 2013
Without opening the drawing...
How can I iterate through and check the object type of all objects in model space? And... then delete them if they are certain types... like lines, circles, polylines, text, mtext, etc?
View 2 Replies
View Related
Aug 8, 2012
In Autocad Arch 2013, is there some parameter or option that will turn off the default behavior of dropping out part of the hatch or color, around a peice of text? In other words I don't what the white space that forms around a text object when I apply a hatch or color region.
View 1 Replies
View Related
Sep 4, 2011
When making a webpage and then using Filters > Web > Slice, is there any easy way to leave space for adsense code or any code at all for that matter. I have tried opening the generated HTML file in Kompozer, but every time I try to add code to the cells, it messes up the entire page's layout.
View 1 Replies
View Related
Feb 12, 2011
How do I strip away all the white space around a graphic?
View 1 Replies
View Related
Feb 27, 2012
I scanned a family photo and the result is about 25% of a letter size sheet.
I wish to attach this to a 'My Family' post, but the result I desire is just he photo without the white space around the photo.
Code:
View 2 Replies
View Related
