There is an area of my face that is a little darker because of a pimple scar or something. So its a dark pink/red, and i want to make it lighter to match the rest of my face. How can i do this?
View 1 Replies
Here is the image I am working with.
I want to change the color to hex #00aced (0, 172, 237). I tried the colorfy, but the image comes out purple. Another way that has worked for me in the past, with white images, is by clicking on the channel dialog and dragging the red down. Clicking on the eye, next delete the original image and than add a new foreground color based on what color I selected from the palette. Of course this isn't working either since the image is so dark.
Now in channel mixer it could work if the RGB would go higher than 200, but since my blue is 237 this is where I am stuck. It has worked with other colors, as long as the RGB is less than 200. This is by selecting each output individually, for example, starting with red and entering a value in red and leaving green and blue at 0. Next selecting Green, entering a value in green and leaving red and blue at 0, and so on... Is there some type of mathematical solution for using the channel mixer, or simple yet, is there a way of making my image more white, without losing my shadows?
Is there a tool I can use to gradually make a color lighter? The dodge/burn tool only makes it one shade lighter for the color that is highlighted by the cursor.
So lets say I start with a dark purple I need something that will decrease the shade as I move my mouse, kinda like the smudge thingy...
how to make your render "pop-out" of the signature area. It gives a really cool effect and is really simple to do. When we are done, it will look a little like this.
OK, to begin, you need to prepare your render. I am going to use this one.
Feel free to use it if you want to.
Open up a new image with the dimensions of 400 x 125. Now you will need to make a background. I'm not going to give any real steps on how to do this, but if you look around on this site, there are many tutorials showing you how to make them. Try using this one, as it is the way I am going to make mine. Don't add the render to your background though. We will do that later.
Following those steps you will get something like this. If you want to add a border, now is the time to do it. The link to the tutorial I told you about above will also show you how to do this.
You now have both a background and a render. Press Ctrl + A to select everything. Now go to:
Image ---> Canvas Size A window like the screenshot below will appear. If you made the size of your image 400 x 125 like I told you, simply set the settings to the same as shown. If you have used a different size, double the width and height of your image and type what the numbers come to into the boxes names "Width" and "Height". Set the offset X and Y values the same as in the screenshot.
Press "Resize".
Your canvas will now look something a little like this.
This is just how you want it.
Now for your render. Open it up and it will appear in a new window. If its to big, resize it. Now go back to your signature window and make a new layer. Copy your render and paste it on to your new layer. A handy tip to know is when you press F11, it will bring The GIMP into full screen mode allowing you to see what you are doing clearly. You should get something like this. Yours will have little dotted squares all behind it though like the image above. Its OK, its how it should be.
Now add some text or whatever you want on your signature. A cool way to make text look good is to type what you want out on to your signature in white, move it to where you want it to be, set that layer's mode to "Overlay" and then duplicate it untill it looks nice. Heres what I got. Again, squares should still be present.
Now merge all the visible layers by pressing Ctrl + M. Select the first option. Now right click on the layer in the layers window and select "Alpha to Selection". This will select all your signature. Copy it by pressing Ctrl + C. Then go to:
Edit ---> Paste as New
This will open up a new window with your signature in it. Go to:
File ---> Save as . . .
Save it as "Popout Signature.png" it must be in a .png for it to work.
Thats it your all done! This is what I got.
I have a cloud.png image and want to make the area around the cloud transparent.
So i used the 'select by color tool' and now i want to fill the selected area with TRANSPARENT.But the 'bucket fill' doesn't allow for that.
In MS Paint when i select part of image with Polygon tool, this part is auto filled with background color. In GIMP i have to use first Selection tool (Free Select) and than switch to Bucket Fill for filling selected area with color. How to make auto filling selected area with color in GIMP as it in MS Paint ?
View 7 Replies View Relatedchanged color saturation and a few other things to try and make it lighter but I am not successful.
View 10 Replies View Relatedhow to make a background lighter or transparent?
View 2 Replies View RelatedI have an image that requires the foreground to be lighter than the sky in the background that I want to enhance. What is the best way to accomplish this in Elements 11?
View 2 Replies View RelatedI was going through an exercise and tried to use one of the listed shortcuts to viewing (Alt+LMB+click) and it made the Maya workarea screens dark grey. My attempted efforts to find out how to undo this failed.
Not sure if I mis-typed the above or what. Only the work areas are dark gray.
So you know when a video buffers, it is typically a round path with circles or lines and such that go from dark to light? Well, I need something like that for a logo design. I am trying to create a custom art brush, but its not happening. I created the shape Id like for all of the things to be along the path, but I don;t know which method of creating a brush to use.
Also, how to make each part around the circle get lighter?
How do you make the side panels lighter - the text is almost unreadable - the side panels are so dark
View 3 Replies View RelatedI have an xref in my drawing. I am trying to use a VP override to make a layer plot with a lighter lineweight. I have changed the layer to number 9 (set to plot light) in the viewport and the layer changes color. When plotting the layer does not plot with the correct lineweight. The object color on the layer is set to bylayer. Visretain is set to "1" What is wrong? Why isn't the layer plotting correctly?
View 9 Replies View RelatedI am trying to mask out a light source in a complex figure. I have just upgraded from PSE 11 -> 12, but I doubt that is the problem. I thought the clone stamp tool in Editor was simply not working. When I'd drag (after setting a source) over the bright area, it would darken where I dragged.
From experience it seemed like it was marking the area it was going to modify - but this turned out to be the extent of the modification. It just stayed dark. Following other discussions, I adjusted my depth of history to ease RAM footprint, restarted Editor, and rebooted my Mac (OSC 10.9). I also twiddled with all the options under Clone Overlay. I could see the effects, but they did not fix the issue. When I try the Clone Stamp tool elsewhere, it does what I expect.
I'm suspecting pilot error, but don't know what else to try.
If I increase exposure or ISO, I either get blury image due to long exposure or noisy sensitive photo from high ISO. And the flash just looks ugly. So I took a fairly dark shot and wants to imporve it using Paint .Net. Is there plug-in or tutorial for this? I tried to use auto-level, which is horrible looking. Recently I have seen a pretty effective HDR Simulation effect on Fantacia Painter Free on my WinPh7. The result is natrual and yet brighter. How do I make something like that. Making a fairly dark photo (not too dark) to a better brighter and still natrual looking one?
View 2 Replies View RelatedI have seen a couple of videos of Gimp 2.8 where the theme is dark but when installing it on a Windows 7 environment it is still boring gray?
I have chekeced Theme but there is only gimp2.0 hemesDefault/Small and thay are both gray?
I just started working with Photoshop, so I might be making some stupid rookie mistake...but I can't figure out what the hell could be wrong.
When I draw something on a dark background it just vanishes as soon as I fill the area with the paint bucket!
If I have a dark grey background, and draw something in black using the brush, when I try to fill the drawing, for instance green, with the paint bucket, the entire picture becomes green!
It was as if the drawing was never there.
At first I thought I had some wierd setting on my brush, but the wierd thing is that this only happens when I use dark colors.
Doing the exact same thing with yellow and red, works perfectly fine.
How to use Smoke make Dark Edge Border effect. I have tried wipe, make a mask and enable the advance gradient, but not happy with the result. Is there any other method to make a Dark Edge Border effect?
View 7 Replies View RelatedRunning 2.6.12 on Linux Mint 13.
I used to be able to do quick and dirty salvaging of pics that are too darkin Photoshop Elements 2 using the levels tool. While Gimp has a levels tool it doesn't seem to work quite the same way.
So what would you do to restore a pic like this?
How to use Darktable to process RAW images.
I currently use UFRaw so: What advantages does Darktable have over UFRaw?
i recently started using GIMP and i made afew stencils with pretty decent success. i started making my 3rd stencil and when i go to fill the image with a dark color, it fills with dark gray instead of dark green, and the light color wont fill at all.
View 1 Replies View RelatedHow I extract a reasonably dark image from its background? Below are two identical images with white background.
But the preset color of my vistaprint business card is light blue. So I just want to paste the image from the links below onto a light blue business card if that is possible.
[URL]........
[URL]........
This is almost 100% what I want: [URL].......
but for some reason the resolution from this home made job comes out terrible at Vista Print so I have to do the card writing on their site and give them a better resolution image which the one in the first two links is.
Any way for me to recreate something like this picture?
I wish to recreate a similar effect as shown in this photo, the left side of another man's face is darker than his right.
I opened a pdf file in Gimp (floor plan) and it turned all the dark lines to pale gray. I tried saving it as a jpeg and it didn't work. What can I do?
View 3 Replies View RelatedI've been printing out a lot of black and white photos on photopaper on a HP Photosmart 7510e.
The printouts are very dark so I've had to boost the brightness levelsin GIMP prior to printing. The problem is that this takes extra timeand I also don't want to save these levels in the XCF file. I would say that (going by the Gamma Display Filter) the printouts are around40% of the brightness they ought to be.
What difference does it make if the active layer is highlight in dark blue or light blue?
I should know this by now!
My friend has taken some engagement photographs and unfortunately the couple have dark hair and the background is also dark - I think you can see her problem with the photos. Somehow the background needs to be lightened and neither of us know how (we both have Photoshop 7)
View 4 Replies View RelatedI have an oval portrait. How do I make the area outside the oval transparent so only the oval picture shows up and it's not "framed" by the white area outside the oval?
View 11 Replies View RelatedI have a self designed logo that looks great on a white background. Problem is when I put the logo over a picture the outside area of the "o" in natco shows behond the red square. I want the outside of the "o" to be flush with the red square so it looks good when I put it over a picture.
View 5 Replies View RelatedHow to make a marking emboss on the green area?Because before make a emboss i can't make sketch in area that.
View 1 Replies View RelatedHow to make my drawing as region that cover the close area. When i select the circle object and tooth object, it not become a region . I already connect all the line but its not working.
View 9 Replies View Related
