My friend has taken some engagement photographs and unfortunately the couple have dark hair and the background is also dark - I think you can see her problem with the photos. Somehow the background needs to be lightened and neither of us know how (we both have Photoshop 7)
I have this stupid problem, I want to make a header for my new site... In this header I use a cool font and do some bevel and emboss on it. The background of the header is transparent because my site has a background with a motive. But when I save the header and place it into my page, there is a white border around the font, how can I solve this? I already tried with brushing some black around the font, this helps, but you can still see it has been done the wrong way.
Windows, PS CS4. I'm trying to erase part of an image such that there is nothing there. However, when I erase the part of the background layer (I have no layers below it, and none above occupying the same space), I do not see the chequered transparency pattern, but dark grey. This grey also remains part of the image as if it were a colour rather than being transparent. To be specific, it is the white between the borders of a comic I am trying to erase..
I have just installed Photoshop CS4. When I try to use the spot healing box on a dark background,the target area is invisible as the target circle is black, as is the background. It's like trying to find a black cat in a coal mine.
Why bother providing an "Antialias Guides and Paths" setting if it's going to look this bad when projected on a dark background? Yes, this is with that setting ENABLED:  It's not quite as unacceptably nasty when the path is dark on a light background, but it's still a good ways off perfection! If Photoshop should not be held accountable for being pixel-perfect, what application should be? This is not even close enough for government work!  Here's the PSD file with which you can generate the above if you'd like to reproduce the appearance shown...
[URL]Â Â Edit:Â Just to show that it can be done well, consider these two images, which I did by stroking the path in linear space.
Hi, I just started working with Photoshop, so I might be making some stupid rookie mistake...but I can't figure out what the hell could be wrong.
When I draw something on a dark background it just vanishes as soon as I fill the area with the paint bucket!
If I have a dark grey background, and draw something in black using the brush, when I try to fill the drawing, for instance green, with the paint bucket, the entire picture becomes green! It was as if the drawing was never there.
At first I thought I had some wierd setting on my brush, but the wierd thing is that this only happens when I use dark.
My default background/work area has been transparent--displayed as a light gray and white checkerboard--forever.
Today it changed to dark gray. It's still transparent, but it shows up on the screen as dark gray. I want it back the way it was. I've read all the solutions on the Adobe forums (using the magic wand, or the background eraser, etc.) and none of them work.
I can't help but think I inadvertently changed some setting,
How I extract a reasonably dark image from its background? Below are two identical images with white background.
But the preset color of my vistaprint business card is light blue. So I just want to paste the image from the links below onto a light blue business card if that is possible.
[URL]........
[URL]........
This is almost 100% what I want: [URL].......
but for some reason the resolution from this home made job comes out terrible at Vista Print so I have to do the card writing on their site and give them a better resolution image which the one in the first two links is.
When I have a drawing open in AutoCAD LT 2012 any xrefs are very dull or perhaps dark is a better description and on a black background tend to be very difficult to see. Is there a setting somewhere I can change to brighten up the xref?
In the footer here: [URL] ...... Â The logos (see 'In the press')Â are white (well, light grey). How can I achieve this effect, given the original colour logos?
I'm using Illustrator cs6. I would like to change the dark gray background that surrounds the art board to a step and repeat patterns of our logo. We use screenshots as a means of generating low-res proofs. Having our step and repeat logo pattern as the background would allow us to easily include it in our low-res screenshot proofs. Can I replace the "system file" for the dark gray to our step and repeat pattern?
is it possible to change the background color [outside the artboard] to a dark grey? because i really dont like having a big white screen while working in illustrator.when you normally work in illustrator, the artboard is indicated by a black border line but when you select the artboard editor tool, the background changes to dark grey, so it is possible and that is the effect im looking for, but then permanently.is it possible to do this via the preferences somewhere, or via a hack?
I must have pressed some shortcut and now the document background between artboards is no more dark gray (as usual) but fully transparent. How to restore this? Â I'm using Illustrator CS6 on OSX Mountain Lion.
How do I change the default toolbar background from dark gray to light gray in illustrator CS6? In the older versions, the toolbar backgrounds were light gray. It easier to read on light gray backgrounds. THe same question applies to Photoshop CS6. InDesign CS6 has light gray backgrounds.
Calibrating the monitor doesn't help.....it means that the brightness of the photos is okay but then again everything else on the screen is too light.
Tried changing color prfofiles etc but no difference.
The strange thing is that it only happens with photoshop....cs, cs2 and elements. With oher programs as I mentioned the photos when dispalyed are the original brightness they need to be.
I am using CS5 on a Mac printing to an Epson artisan50 but prints turn out too dark. The image on the monitor is correct in all applications including CS5. The prints are correct in other applications but only in CS5 are they too dark.Â
I saved the image used in the tutorial but it looks darker than it does on the website. Why is that? When I adjust the levels the blacks look too dark even though I made sure my foreground color is less black.
In CS3, I'm having trouble getting my prints to match the appearance on monitor -- my prints are uniformly 1-2 stops too dark, color otherwise is very good. I have calibrated my Dell monitor with Colorvision's Spyder2 colorimeter. Prints are also a hair too dark in CS2, but not as dark.
Photos and Photoshop are in RGB color space. Printer is Epson R2400 with updated drivers I just downloaded and updated into Photoshop. I also downloaded updated ICC color profiles for the Epson Premium Glossy Paper I use.
Printer settings in Photoshop are: Photoshop manages color; Adobe RGB printer profile; perceptual rendering intent; black point compensation "on"; ICM color management; color management set to "Off". I'm using North American Prepress 2 color setting. These are the exact settings Scott Kelby recommends in his "Adobe Photoshop CS3 Book for Digital Photographers" for getting calibrated prints.
I am in Photoshop, all the colors are darker and more saturated. but when I save the file, it gets all light and not how I wanted it. Just to let you know, I am running CS2.
Much more full of color. This is what I wanted. I also might add that when I load pictures they are darker than when I open them out of photoshop. For some reason it just makes everything darker when in photoshop.
I am using Photoshop CS3. We also use Indesign CS2. Our photos usually come out really dark in our newspaper. Whenever I lighten the photos the color looks washed out but if I don't lighten them, they become extremely dark. Same thing with our grayscale photos. I have emailed another paper and they suggest we open the midtones on our photos and use a highlight dot at 2% and shadow dot range from 93-97%, depending on how much black area there is in the photo. My question? When they say open the midtones, where do I find the highlight dot and shadow dot?
Old: CS3 printing to Epson 3800. New: CS4 prints dark on Epson 3800. Regardless of picture sent over. Same settings as with CS3 and every variation I can think of. Epson 3800 hasn't changed. Only Adobe Photoshop version has. I can print the same pics from (example) Windows picture manager, and what I see on the CALIBRATED screen I see on the Epson, so this isn't an Epson issue.
I have a deadline for my art GCSE closing in and there's a major problem with my final piece!The actual art work is fine, and It looks fantastic viewed from photoshop. However, the printing company requires it to be in PDF format, and when I save as PDF the PDF file has darker, blander colours. Really noticable... I find with photoshop everything I print comes out darker also.. so I tried researching this and found out a bit about CMYK and RGB but to be honest I need someone too explain this to me in english, with no highly confusing technical terms. My final piece relies on bright pink and blue, and so I wouldn't want to waste the money printing it on A2, only for it to have dull colours.Thank you so much in advance I am extremely worried (I've uploaded a JPEG to show how I want it to look when printed, and then a PDF to show the annoying dull colour change)
i print using cs3 to either a epson r1900 or 2400 printers i do not flatten my images and i switch of all the printer color controls . i have calibrated ny screen (eye one pro) when i print out from photoshop onto epson high gloss paper the ptints are about 1-1.5 stops darker than the image on the screen my profile is adobe 1998 not srgb
When I make a picture it looks how I want it to but when I save it and open it up in my browser it looks WAY darker than when I was working on it! How can I stop Photoshop from doing this?