Is there a tool I can use to gradually make a color lighter? The dodge/burn tool only makes it one shade lighter for the color that is highlighted by the cursor.
So lets say I start with a dark purple I need something that will decrease the shade as I move my mouse, kinda like the smudge thingy...
There is an area of my face that is a little darker because of a pimple scar or something. So its a dark pink/red, and i want to make it lighter to match the rest of my face. How can i do this?
View 1 Replies View RelatedHere is the image I am working with.
I want to change the color to hex #00aced (0, 172, 237). I tried the colorfy, but the image comes out purple. Another way that has worked for me in the past, with white images, is by clicking on the channel dialog and dragging the red down. Clicking on the eye, next delete the original image and than add a new foreground color based on what color I selected from the palette. Of course this isn't working either since the image is so dark.
Now in channel mixer it could work if the RGB would go higher than 200, but since my blue is 237 this is where I am stuck. It has worked with other colors, as long as the RGB is less than 200. This is by selecting each output individually, for example, starting with red and entering a value in red and leaving green and blue at 0. Next selecting Green, entering a value in green and leaving red and blue at 0, and so on... Is there some type of mathematical solution for using the channel mixer, or simple yet, is there a way of making my image more white, without losing my shadows?
When I try to edit the color of a shape layer by opening the color dialogue box of the shape layer, the color that is picked up is a lighter color than the color I clicked on.
The eyedropper is set to point sample and all layers. This problem does not occur if I open the color dialogue box that is part of the toolbar.
changed color saturation and a few other things to try and make it lighter but I am not successful.
View 10 Replies View RelatedI have two areas of different plain colors, meeting at a hard edge. I want to blend the two areas so they merge gradually from one color into the other without any obvious edge
I'm an inexperienced CS5 user and have spent hours trying to do this using various tools, without a decent result. There must be a way that I haven't found!
how to make a background lighter or transparent?
View 2 Replies View RelatedI have an image that requires the foreground to be lighter than the sky in the background that I want to enhance. What is the best way to accomplish this in Elements 11?
View 2 Replies View RelatedSo you know when a video buffers, it is typically a round path with circles or lines and such that go from dark to light? Well, I need something like that for a logo design. I am trying to create a custom art brush, but its not happening. I created the shape Id like for all of the things to be along the path, but I don;t know which method of creating a brush to use.
Also, how to make each part around the circle get lighter?
How do you make the side panels lighter - the text is almost unreadable - the side panels are so dark
View 3 Replies View RelatedI have an xref in my drawing. I am trying to use a VP override to make a layer plot with a lighter lineweight. I have changed the layer to number 9 (set to plot light) in the viewport and the layer changes color. When plotting the layer does not plot with the correct lineweight. The object color on the layer is set to bylayer. Visretain is set to "1" What is wrong? Why isn't the layer plotting correctly?
View 9 Replies View RelatedIs there a way to make the color select tool not only select a specific color but related shades as well. I have a graphic that is mainly shades of gray but with black outlines and divisions as well as other colors mixed in. I want to shift all the shades of gray to shades of dark yellow without have to select each shade individually.
View 1 Replies View RelatedI want to make a basic color filter over my image that, for instance, filters out every color that isn't red. so everything that was red would show up as normal and everything that was blue or green would show up as black.
How do I do that in gimp?
A way to make color book images out of a color photo. Want to keep clean solid lines so it is clear but when I do it, the image always comes out distorted and fuzzy.
View 3 Replies View RelatedI am trying to color a sketch I made and have thus far (successfully??) created a white background, an ink layer and a color layer. They are in multiply mode. The file I am working with is not GIF or JPEG, it's XCF.
Color is set to 100%, mode is normal. And yes, the image mode IS set to RGB.
I had selected a small color palette and filled an ellipse shape with it. Fine so far. I wanted to make another ellipse within this one and make it a different color. This did not work. I don't know how many options I tried, incl. exiting the program and starting again, to no avail. Somehow (how this worked) ONE additional color worked (very similar to the first). But no black, for example, no green, nothing.
Yesterday I finished a picture (my first attempt using GIMP or any software, at least for art) and I was super happy with the result. It's not working.
as you can see I was able to make the background transparent by 'select by color' + 'add alpha channel' + 'remove selected area' but I also need to remove the white behind the 50% opaque reddish orange flames as well, i cannot select the white by 'select by color' or 'magic wand select' or any of the selection tools because of the issues of the white / reddish orange mix of opacity, so I need removing this white behind the part opacity color.
View 6 Replies View RelatedHow to use a photo behind cut out text and everything was going fine until I tried to add text and change the color. The text is invisible even though I changed the color to white and the box resized itself really small and I can't see anything even though I set it to 150 px.
Try to unchecking the 'dynamic text' button but I don't see this button anywhere in my text tab.
I have never been able to successfully use GIMP for anything because of this problem with adding text. I have had 2 versions, Windows and Linux. Right now I am using it with Pangolin.
In MS Paint when i select part of image with Polygon tool, this part is auto filled with background color. In GIMP i have to use first Selection tool (Free Select) and than switch to Bucket Fill for filling selected area with color. How to make auto filling selected area with color in GIMP as it in MS Paint ?
View 7 Replies View RelatedI would like to make a color selection and then make a mask of that color. How on earth do I do that?
View 5 Replies View Relatedhow do you make a silver color that actually looks silver & not grey, I guess the main thing is how do you make it metallic looking?
View 1 Replies View RelatedI have seen it on many sites where i image starts off full colour and gradualy fades into nothing i like the effect and i no how to fade a image using the opacity and fill.
View 3 Replies View Relatedis there any way to make gradyally decreasing in size circles in photoshop. like on car windshields in edges if you noticed, starts from black and then it sort of fades away with pattern.
Falftone effect creates crappy jagged circles. I am attaching approximately what Im talking about, manually made every layer for it...
I would like to make a picture "fade out" or better said, gradually go to transparent. I know it is somehow possible by adding a masking layer or something like that, I just can't remember how.
View 9 Replies View RelatedI have an indoor group photo using flash light. The problem is the center of the picture is much brighter than the sides. Is there any easy way to increase the brightness and contrast towards the sides, and gradually decrease the brightness at the middle?
View 6 Replies View RelatedHow to make the piece appear gradually, piece by piece until all of it?
View 4 Replies View RelatedI'm drawing a map of an island and I want to have the colour blue surrounding the island representing the sea. But I want the blue to gradually fade into nothing. I've tried to use the sray can but its just doing weird things with rectangles!
View 3 Replies View RelatedIn CS6 when 2 layers are open the scale gradually does not synchronize even though the layers are the same size.
View 1 Replies View Related1. i want to make the bottom of an image fade to black gradually. like a spotlight all around it.
2. i want to know how to make a gradiented grey backround, starting black. ending gray.
I have two related questions:
1. I am not able to do a somewhat basic task. I have an image on a seperate layer and I want to merge it, but I want the edges to be more softened.I used to use photoshop deluxe, it had a paint brush with a soft round tip that you could make hard edges softer. Its not like smudge, more like a softer eraser. Is there a way to do that?
2. Is there some way to make any image gradually more transparent either from one edge to another or from the center out? (Like the effect you get using gradient, but with a gradual opacity to an opaque object/image)
I'm animating a bicycle riding downhill (from the top of a hill to the even ground). What expression should i use to gradually accelerate bicycle's wheels? And how do i gradually slow down the wheels after the bicycle has reached the even terrain?
View 1 Replies View RelatedAudio sync problem I'm experiencing with videos recorded with the latest iPad 3 (well, that's what I'm calling it anyway).
I believe the iPad 3 recording format is 1080/30p with 44.1Khz / 16 bit audio, but when I match those settings on a Premiere Pro CS5.5 project (or try 48KHz audio as a test), the audio gradually goes out of sync. If the video is several minutes long, it becomes quite obvious, and by 10 minutes, it's terrible!
I should add the file plays back fine on the iPad itself and was imported to a Mac via iTunes. It also plays fine on the Mac itself in Quicktime.
On a related note, I additionally captured the audio using a Zoom H2n which i intended to replace in Premiere, but foolishly I captured it at 48KHz, rather than the 44.1KHz of the iPad video file. Should I resample it?
I actually managed to line-up the 48 and 44.1KHz waveforms from the iPad and Zoom in Premiere quite accurately, but again both gradually go out of sync with the video...
I'm running Premiere Pro 5.5.2 on Mac OSX 10.7.3.