I have an indoor group photo using flash light. The problem is the center of the picture is much brighter than the sides. Is there any easy way to increase the brightness and contrast towards the sides, and gradually decrease the brightness at the middle?
View 6 RepliesI am able to change the brightness/contrast for part of an image by using, for example, the Rectangle Select tool. I want to be a little trickier though. I would like to use the rectangle select tool, but have the effect of the brightness/contrast apply 100% at the bottom of the rectangle and say 10% at the top, with gradations from 100 to 10 from bottom to top. Is this possible?
View 3 Replies View RelatedWhat is the effect or process to, for example, ensure that normally washed out bright background on, say, a sunny beach, has same depth and contrast as the darker subject in the foreground? It is an unnatural state since your eye and most cameras will adjust to one extreme or the other.
View 3 Replies View Relatedwhat is the best method for adjusting brightness and contrast in CS6? Is it by simply adjusting the Brightness / Contrast properties in an Adjustment Layer or is there a better way of going about it?
View 3 Replies View RelatedI can go to Brightness/Contrast click on it and get a window that will allow me to adjust the Brightness/Contrast using sliders.
when I use Brightness/Contrast it will give me an eye dropper tool?
How do I get my Brightness/Contrast working again? I've reset my pallet locations and even re-installed the software.
I add a noise filter too the whole pic and then do brightness and contrast,the preview looks alright, press ok and the noise dosent change at all
View 5 Replies View RelatedIt's a small issue, but one that was a no brainer in CS5 - I use Legacy Brightness Contrast about 80 times a day, and CS6 no longer keeps it ticked, I have to manually enable it every single time, and by about the 57th time of having to do this every day, it becomes a more than a little irritating. As some of you will remember, CS5 just kept it ticked once you selected it.
The new brightness / contrast is great for certain tasks, not so great for others. I, and I'm sure many others rely on the legacy version.
Brightness/contrast only seems to have an effect on the 'background' layer--not on any subsequent layers I apply. And it only seems to be on the current docs that I am using--if I open some older ps docs from the recent past, brightness/contrast works fine on all layers...?
View 5 Replies View RelatedI try to apply Levels & or Brightness & Contrast settings to an image, it always seems to revert back to the way it was. The filters won't do anything it seems. I have Adobe Photoshop CS2. At home it did the same thing and I re-installed Photoshop only to find out it still did not work.
View 4 Replies View RelatedI am in Photoshop 7.
Is there a keyboard shortcut to the Brightness/Contrast?
I am tired of going through the menu.
'Brightness/Contrast' screen becomes unexplainably absent while using my PhotoShop 7.0 in XP. When I click on 'Brightness/Contrast' the eyedropper becomes active as usual but the dialog screen with the two 'sliders' for brightness and contrast is not visible. Where is it? If I uninstall and reinstall it's OK again for a while.
View 1 Replies View RelatedI am using PS7 on a PC.
I try to access Brightness/Contrast Menu the eyedropper tool appears and the only way out of the the tool is to hit ESC. How do I get my menu back?
Having trouble with my Photoshop 7. When I want to use the Brightness/Contrast adjustment within the Image/Adjustment section the scroll bars for brightness/contrast do not come up. An eyedropper tool appears. When this happens I can only click on the image and change the color squares on the left in the tools area. I can't even close the image or close the program. I have to Alt/ctrl/delete to close the program. I've also uninstalled the program & reloaded but this problem continues.
View 7 Replies View RelatedI'm looking for a plug in which will reduce the brightness (to a level which I can select) of an image away from a central point on the image. Does such a plug in exist.
View 3 Replies View RelatedI'm trying to adjust brightness/contrast and saturation over about 30 layers on an animated GIF. Everything looks great until I do a save for web and click on the animate box. At that point, the color/changes drop off completely. It shows up fine when it's just the one layer being shown. And it seems to be showing up on all the layers when I'm in the main edit window. I keep looking and making sure I have the 'this adjustment affects all layers below,' and I do. I even tried saving a GIF with the other setting turned on and I got the same thing.
Anyway, I exported a few GIFs, thinking maybe the adjustment layers would kick in as it saved, but nope. Neither layer saved into the exported GIF.
I'm sure this is just a simple setting I'm missing, but I'm banging my head against the desk at this point.
looking at the image plane and the 2 inputs I used - diffuse / opacity (alpha channel), what parameters are the best way to adjust the image plane brightness / contrast / levels (photoshop style)?
That’s what I like about these forums. A great way to get straight to the point and learn stuff fast.
I'm importing RAW files straight from a CF card reader into my network storage drive via LR5.3. While reviewing as it imports initially each image looks great but a few seconds after it loads onto the screen it seems like LR applies a bit of extra brightness and lessens the contrast and I lose a load of detail that was there originally. I've not touched the import settings and no filters are being applied by myself on import.
View 5 Replies View RelatedWhat is the keyboard shortcut for remove color cast and for brightness/contrast?
View 1 Replies View RelatedEvery time I use adjustments like brightness/contrast, PSP seems to remember those settings, because the next time I use them, they start with the same values as I used before. But I do not want that. This way I always have to move all sliders to their zero position before adjusting. Every image needs different values and I always like to start from scratch (zero values).
So, how can I tell PSP not to remember those settings every time?
i've got the latest version of gimp and ufraw.
i have a folder with about 100 jpg files in it that i want to apply a general brightness contrast setting to.
Using the main interface to do each one I would need to go to Tools > Colour > Brightness Contrast and set a Brightness value of 16 and leave the contrast at 0
What i would like to do obvious is to run a batch command to do this operation on all files in a folder
I've tried guessing at a few command lines to do it but all have failed and basically how to do it.
What I'd like to do is adjust the color and brightness/contrast of many layers of an animation. Now, for a still image with many layers I know you can generally add a partially transparent layer over the whole thing, however, since it's an animated .gif I have to do the same thing to each individual layer. I could probably go through and do it by hand and just get it over with. But, I'm curious if there's a feature for this, or is there a plugin that can repeat actions for multiple layers?
View 1 Replies View RelatedI sometimes have to fix up group photos that have been taken with a flash, where the people farthest from the camera are relatively dark. I would like to be able to apply the "brightness" and "contrast" controls to the photos in such a way that the amount of change varies across the picture, in much the way that the "gradient" control works for a color or a pattern.
View 9 Replies View Relatedhow to change the window border [sic] brightness in PS cs2. Attached is a gif showing the area between the rulers and image editing area at 192 (3/4 tone.) Is there a way change it to 50% gray.
I tried fiddling with the windows XP display properties->appearance->advanced dialog, but didn't come up with anything.
How would I go about making the side of his face less bright, how to isolate just that one specific area. (And I no longer have the xcf file saved).
I also noticed that after using the color and saturation tools, there are red lines on the scruff of his cheek. (I discovered that those lines were on the original pic, but they just became more visible after working with the color/contrast/etc). Is there any way that I can "smooth" those red lines without making it look like the dog's breakfast?
I've been struggling the whole day to change the color of the black crack in the attached picture to red (to match my other samples) whilst fading the crack edging (paint overrun). The best I could get was to manually dodge tool the cracks to lessen the excess paint outside of the cracks but then the dodging lessens the contrast of the crack crevice too. How to (1) locally contrast the cracks from the paint around its edges and (2) change the color of the crack from black.
I've tried playing with overlays whilst adjusting the color modes for the cracks, but I've not met with much success and I'm not sure if its my lack of knowledge of these features or if its just the wrong approach altogether. PS. I'm using CS2 (its what the office has...)
A few years ago I learned in school the usefullness of global color. I used it today and it was very usefull to quickly change the color of a lot of different objects at the same time.
HOWEVER; I remember they also tought me that it was also possible to change the brightness or shading or something inside one global color.
for example lets say I picked a red as a global color, and I have 10 objects all in that red. Then it should be possible to let 5 of those objects have a lighter version of that red color.
Then afterwards when I change my global color to green, all the objects change to green, and those 5 objects now have a lighter green color.
Am i remembering this correctly, and if so; how do I apply this? Because I cannot figure it out...
How can I change the contrast and.or color s on the front Panel to make it easier to see the various menus. I have recently started to loose some of my sight and the opening Panel is now difficult to read / work through.Is it possible to show the various editing options etc. as white on black rather than white on grey ?
View 2 Replies View RelatedI have seen it on many sites where i image starts off full colour and gradualy fades into nothing i like the effect and i no how to fade a image using the opacity and fill.
View 3 Replies View Relatedis there any way to make gradyally decreasing in size circles in photoshop. like on car windshields in edges if you noticed, starts from black and then it sort of fades away with pattern.
Falftone effect creates crappy jagged circles. I am attaching approximately what Im talking about, manually made every layer for it...
I would like to make a picture "fade out" or better said, gradually go to transparent. I know it is somehow possible by adding a masking layer or something like that, I just can't remember how.
View 9 Replies View RelatedIn CS6 when 2 layers are open the scale gradually does not synchronize even though the layers are the same size.
View 1 Replies View Related