I would like to make a picture "fade out" or better said, gradually go to transparent. I know it is somehow possible by adding a masking layer or something like that, I just can't remember how.
View 9 Replies
I have two related questions:
1. I am not able to do a somewhat basic task. I have an image on a seperate layer and I want to merge it, but I want the edges to be more softened.I used to use photoshop deluxe, it had a paint brush with a soft round tip that you could make hard edges softer. Its not like smudge, more like a softer eraser. Is there a way to do that?
2. Is there some way to make any image gradually more transparent either from one edge to another or from the center out? (Like the effect you get using gradient, but with a gradual opacity to an opaque object/image)
When photographing a tall object from the ground, for example the rectangle of a house wall, the picture perspective will be distorted in the sense that the bottom of the wall will be wider in the picture than the top of the wall.
Say, for example, that the bottom of the house wall in the picture is 1 inch wider than the top of the wall. Is it possible to increase the size of the picture gradually from the bottom to the top, from 0% of 1 inch at the bottom to 100% of 1inch at the top? So the end result in the picture will be an evenly sized wall from bottom to top?
I have several partially transparent GIFs.
I'm trying to layer them all on top of each other.
When I copy one partially transparent GIF and paste it on to the second partially transparent GIF the transparent section turns white and is no longer transparent.
Therefore covering up the contents of the prior GIF.
In short, please have a look at the three attached pictures, I would like to have all three on top of each other showing all buttons.
How do I make part of a picture transparent?
View 2 Replies View RelatedI have seen it on many sites where i image starts off full colour and gradualy fades into nothing i like the effect and i no how to fade a image using the opacity and fill.
View 3 Replies View Relatedis there any way to make gradyally decreasing in size circles in photoshop. like on car windshields in edges if you noticed, starts from black and then it sort of fades away with pattern.
Falftone effect creates crappy jagged circles. I am attaching approximately what Im talking about, manually made every layer for it...
I have seen several instructions on how to fade a picture to transparent. How I can fade a picture to the exact color of the background, i.e. the edge of the picture disappears and smoothly transitions into the background color? All fading I have tried sofar still leaves an edge of the picture visible, contrasting with the background.
View 4 Replies View RelatedI have an indoor group photo using flash light. The problem is the center of the picture is much brighter than the sides. Is there any easy way to increase the brightness and contrast towards the sides, and gradually decrease the brightness at the middle?
View 6 Replies View RelatedI've been working with Paint.NET for a while and it's got some great tools for creating images with transparent parts. what I'm looking for is some way to make a picture partially transparent.
So, say I've got a PNG of a tree. I want the tree to be 70% visible, so you can see outlines of things placed behind the tree. How do I do this? Using the magic marker to select the tree, and then telling it to make the tree partially transparent doesn't work since the part's that doesn't get transparent gets the secondary color as the 70% visibility, not the original, different shadings of the tree.
I have a picture with white background . I want to crop only the picture from there with transparent background .
i read your forum and i use the Magic Wand Tool , and i save the image in png , but the image saved was also with white background . How i can do this .
In CS6 when 2 layers are open the scale gradually does not synchronize even though the layers are the same size.
View 1 Replies View Related1. i want to make the bottom of an image fade to black gradually. like a spotlight all around it.
2. i want to know how to make a gradiented grey backround, starting black. ending gray.
I'm trying to change the white background on a picture of myself to be transparent. When I use the "Color to Alpha" tool, it works, but when I paste the photo into word/powerpoint/etc not only does it turn the white background 100% transparent but it also makes the whole image slightly transparent.
How can I make the white background disappear without making the whole image transparent? I want to use color to alpha because if I simply use the magic wand tool and delete the white area there is still some white showing through my hair.
I have Corel 15. I want to take a picture and make it gradually go transparent from the middle of the picture to the top (using Photo Paint I guess), you know the thing with the checkerboard squares. Then I will put it in Draw and overlay some text across the top area where it has gradually gone transparent.
I do not want a sharp line between regular and transparent as if I cut a hole in the background and deleted the hole part. I want a gradual fade sort of transparency for the entire image. I have searched the internet for how to do this even using using Photoshop and there are not instructions available.
I have two areas of different plain colors, meeting at a hard edge. I want to blend the two areas so they merge gradually from one color into the other without any obvious edge
I'm an inexperienced CS5 user and have spent hours trying to do this using various tools, without a decent result. There must be a way that I haven't found!
1. Is there a plugin available to export files as pdf?
2. How to make a section of a pic transparent. I've spent a couple of hours on this now, and I've searched the documentation section, and I've searched the forums. Most specifically, how do I set a transparent color for a gif? But how do I make an AREA of ANY file transparent? One thing I tried to do was use the "Wet Floor Reflection" plugin, and it requires a transparent area below the existing image. I couldn't do that, either.
I am trying to locate the image over the glass surface.
But once picture is located over the glass the Decal command makes my picture transparent.
Is there any way to make it not transparent?
So far it works only with not transparent substrate.
[URL]
I'm wanting to create transparent text over a picture with only the outline of the text showing. So basically, I need to only see the stroke of the text and have be picture show thru from behind.
View 9 Replies View RelatedHow to make the piece appear gradually, piece by piece until all of it?
View 4 Replies View RelatedIs there a tool I can use to gradually make a color lighter? The dodge/burn tool only makes it one shade lighter for the color that is highlighted by the cursor.
So lets say I start with a dark purple I need something that will decrease the shade as I move my mouse, kinda like the smudge thingy...
I'm drawing a map of an island and I want to have the colour blue surrounding the island representing the sea. But I want the blue to gradually fade into nothing. I've tried to use the sray can but its just doing weird things with rectangles!
View 3 Replies View RelatedI'm animating a bicycle riding downhill (from the top of a hill to the even ground). What expression should i use to gradually accelerate bicycle's wheels? And how do i gradually slow down the wheels after the bicycle has reached the even terrain?
View 1 Replies View RelatedAudio sync problem I'm experiencing with videos recorded with the latest iPad 3 (well, that's what I'm calling it anyway).
I believe the iPad 3 recording format is 1080/30p with 44.1Khz / 16 bit audio, but when I match those settings on a Premiere Pro CS5.5 project (or try 48KHz audio as a test), the audio gradually goes out of sync. If the video is several minutes long, it becomes quite obvious, and by 10 minutes, it's terrible!
I should add the file plays back fine on the iPad itself and was imported to a Mac via iTunes. It also plays fine on the Mac itself in Quicktime.
On a related note, I additionally captured the audio using a Zoom H2n which i intended to replace in Premiere, but foolishly I captured it at 48KHz, rather than the 44.1KHz of the iPad video file. Should I resample it?
I actually managed to line-up the 48 and 44.1KHz waveforms from the iPad and Zoom in Premiere quite accurately, but again both gradually go out of sync with the video...
I'm running Premiere Pro 5.5.2 on Mac OSX 10.7.3.
I know how to change the playback speed of a video clip in my project, but is there a way to have it smoothly transition? For instance, can I have it go from 1x to 3x over a period of 2 seconds or must I jump directly from 1x to 3x (or manually break the files into dozens of super small chunks and manually increase each one... which will still not look smooth)?
View 2 Replies View RelatedI am working on a Mac (Snow Leapord) with Photoshop CS6. When I try to save a sliced and transparent PSD in the Save For Web dialog box with PNG-24, the transparency dissapears once exported. I have the transparency and interlaced boxes both checked. The images appear transparent in the Optimized Save for Web dialog box, but the transparency dissapears once exported out of Photoshop.
I never had a problem with this when I was using CS4...
I need to strip my current image of its background color so that the background color on my website goes thru my image. In other words I need a transparent background for my image.
I have create a new layer that is transparent, but the background color on my website does not go thru it. The background color of this image appears to be grayish not transparent.
I'm using PSE10 on a Win7 (64bit) OS. When I delete a picture (from catalogue and harddrive) the PSE-Organizer tends to jump down several pictures (Haven't been able to determine a fixed number), so I have to go up again and browse through the same pics a couple of times.
View 2 Replies View Relatedwhen i go into the editor and pull up a picture and blue background appears behind the picture and circle enters the screen. how do i get out of this?
View 1 Replies View RelatedI am using Photoshop Elements 10. How do I convert a picture to B&W and then erase part of the picture for the color?
View 4 Replies View RelatedAny one tell me how to turn a regular colored picture to a picture that looks like it has been drawn with a pencil.
View 1 Replies View Related
