I have seen several instructions on how to fade a picture to transparent. How I can fade a picture to the exact color of the background, i.e. the edge of the picture disappears and smoothly transitions into the background color? All fading I have tried sofar still leaves an edge of the picture visible, contrasting with the background.
View 4 Replies
I would like to add some black boarders to my fotos that fade to transparent. a little bit like this [URL]But with the difference that I dont need the boarders to be really really dark. they sould be more transparent where I can still see some of the details of the foto layer beneath. The idea is more to give my pictures some slightly darker boarders so that I can print them out and they look somehow similar when I put them on the wall...
So theoretically i thought of adding a new layer, make a rounded selection, invert the selection and use the blend tool from black to transparent (if this is somehow possible). But maybe there is an easier or better way or maybe there exist some additonal plugins where I can do some simple foto things like that with a already existing filter?
I'm trying to change the white background on a picture of myself to be transparent. When I use the "Color to Alpha" tool, it works, but when I paste the photo into word/powerpoint/etc not only does it turn the white background 100% transparent but it also makes the whole image slightly transparent.
How can I make the white background disappear without making the whole image transparent? I want to use color to alpha because if I simply use the magic wand tool and delete the white area there is still some white showing through my hair.
I have a nicely edited series of videos fading into each other in the video track, and would like to have a series of photographs fade in and out in the overlay track. Fade to Black or dissolve dont achieve the affect I want where we can see the underlying video between photos.
View 5 Replies View RelatedI have a photo that Iwant to look more natural by fading the corners out to transparent so it doesn't look like a square photo.
Here is an example.
I want it to be somewhat like this where the background of the image is like a gradient to transparent.
I have never had this issue until CS6. I do have a Retina Macbook Pro too. Basically though, I'm building a website and need to fade out a texture to transparent. I usually do this and it works fine, but right now it is going almost straight to transparent it isn't a smooth gradual gradient.
View 9 Replies View RelatedI have a question about circles can you make a circle with a color in the middle fading out to transparent? so basically i want say a purple circle then towards the edges of the circle transparent.
View 15 Replies View RelatedHow do you make a photo fade to transparent in Photoshop? I am attempting to let the orange edges of the image slowly fade into the black background of the webpage.
View 6 Replies View RelatedI am having a little trouble trying to add multiple fade to transparent gradients appear in a single image. Here are the steps I have done so far:
Create a new vector with the photo unlocked
Add a layer mask
use the black to white gradient, so the edge of the photo is completely translarent and as you move to the center, it slowly reveals the photo.
I used this technique I found online for one edge of the photo and it worked great, untill I tried the second gradient on the same photo, and the first one I did disappeared. I guess Photoshop only lets you have one.
The next thing I tried is to create another vector mask and create another gradient, but it did not work at all. Also, Photoshop only lets you have two vector masks per layer, so That wont do me much good if I need 4 gradients, each one fading to transparent around the 4 edges of the photo.
Any solution would be greatly appreciated. I plan to take the photo that has the fade to transparent gradients and copy it to another background image with some text.
Thanks a lot in advance,
Jake
I've got a photo that I want the edges to gradually fade away into a transparent background.
View 6 Replies View RelatedI have Photoshop 7.0 and am a complete beginner. I have a jpeg which is size 750x250, I need to fade approx the right half of the picture to black (Moving from left to right the picture gradually gets darker and darker ).
View 1 Replies View RelatedI want to use a picture as a background with text over it. How do I fade the picture in Photoshop CS so it looks like the background on websites? I want the text to stand out with the faded picture behind it.
View 1 Replies View RelatedI have Photoshop 7.0 and am a complete beginner(real dumb with computers!). I have a jpeg which is size 750x250, I need to fade approx the right half of the picture to black (Moving from left to right the picture gradually gets darker and darker.
View 1 Replies View RelatedI want to know how you can fade the bottom part of a pic so it eventually changes into one complete color, you know so I can use a picture as a youtube background without repeating it ?
What I mean is something like this: [URL]....... if you notice the bottom it's fading into black, but i would like to do this to pictures so it slowly faces into complete darkness, or any color really.
[URL] how to fade the edges in the way I want to, I can fade them one by one in each layer and then select all, but the result is very unsymmetrical, and the fade effect starts to late and it's in too much quantity.
View 2 Replies View RelatedI'm looking for a way to take a layer, and make the outer part of it fade. Idf this is too confusing let me know ....
View 3 Replies View RelatedI want to blur or fade just one side of a picture to blend into a new header image.
I don't want the picture to look as if it has just been stuck on top of the background....It must look as if it's an integral part of the background.... the picture has a very defined, dark "hard" edge . And I would like to "soften" it ....is that possible?
What techniques are available to integrate a picture into a header background?
I have cut out a picture of a rose using the ellipse tool. It is now in the shape of a circle. All I want to do is fade the edges of it, so they are blurred.
View 7 Replies View RelatedI have several partially transparent GIFs.
I'm trying to layer them all on top of each other.
When I copy one partially transparent GIF and paste it on to the second partially transparent GIF the transparent section turns white and is no longer transparent.
Therefore covering up the contents of the prior GIF.
In short, please have a look at the three attached pictures, I would like to have all three on top of each other showing all buttons.
I am trying to take a image from one picture to move to another picture using the lasso tool I keep trying to use the lasso tool and when I'm done it automatically resizes its self to a size I don't want. How do I get it to stay the size I put it at. My goal is to fade the edges and then slide it over to another picture but the whole picture slides over instead of the lasso section.
View 3 Replies View RelatedI've just downloaded and installed GIMP so it really might be too early to ask this, but after searching I've not been able to find much of an answer. In Photoshop most of my work uses the fade command. I've discovered this in GIMP and it works with some tools but not others (it's grayed out).So for example, if I wanted to draw with the paintbrush and then fade it to 50%, how would I do so? I'm suspecting there's some way to do it that doesn't involve Edit > Fade.
View 1 Replies View RelatedI have a flattened bitmap (no layers) and I would like to make it "fade" out to one side in a pixelated way, as if the pixels of the image is breaking up and the image is dissolving into transparent. I don't know if that explains it well, but a little like this image:
[URL]...........
How can I do this with The Gimp? I also have the original image in SVG format with all the layers (made with Inkscape)?
I'm trying to create a fade in animated gif based on a youtube tutorial. The tutorial has a background then creates a new image layer. The image layer is duplicated and the opacity is increased from lower to higher values.
A copy of the background is created and placed under each newly created layer.
The video then merges the layers down into the copied backgrounds. This is where my gimp version does not work. My new images will not merge down into the copied backgrounds. Is there a setting that I am missing on my layers?
I am new to gimp and am trying to work out how to fade out an image diagonally.
I have managed to fade and image from left to right using a masked layer and the gradient tool but am struggling to fade diagonally.
Is there a relatively simple, automated tool in gimp to apply one picture's environment lighting properties to another picture?
So for example if i cut out an object from one picture that has pretty warm lighting environment, and put it in a cold light background it will look pretty out of place obviously, and this is what I would like to resolve.
or how to position a picture in a specific location within a background picture.
View 3 Replies View RelatedWhat I want to do, is take the path tool, make a pattern around a picture (which is rectangle) placing it on a picture of a board like this...and then pull the picture horizontally, and vertically, to make it circular, to fit the perimeter of the board. If I understand it correctly, when you use the path tool...it allows you to make an image round (from rectangular) is that true?
View 1 Replies View RelatedI figured out how to use the layers option to fade an image into white for a Blackberry theme I'm making. After getting the hang of that, I figured I could try the same thing with a different image. But instead of opening up both images in different colors, both show up as the color of the first image. Both images are png files, the same file format that I used the first set of images for. I have not changed the size nor made anything transparent.
View 1 Replies View RelatedI've been using gimp for awhile now and have had great success using itto retouch about a zillion scans of old family photographs. but other than then few things I need in order to do that (paintbrush, clone tool, rotate tool and crop) I am still largely ignorant of how to use gimp. (There's just so much functionality in there, and I'm sure that I don't even have any use for about 90% of it.)
Anyway, a relative just sent me an old old family photo that some nitwit,perhaps a generation or two ago, did some seriously violence to with a pair of scissors. To salvage this one and to make it look presentable I really need to be able to take the scan I have of it and crop it into a oval shape.(Yes, it is a portrait.)
So anyway, how do I do this? It isn't obviously. I already did manage to figure out how to make a selection of the exact size and shape (and location)of oval that I want, and I _did_ make a selection like that... at least I_thought_ that I did... but then when I did crop-to-selection I ended up with the picture cropped to a rectangular shape, where the rectangle in question is, quite apparently, the rectangle which only and exactly contained the oval that I had selected earlier.
I'm sort-of guessing that what I really want is gonna end up being another one of these things that ends up involving multiple layers... yes? I mean of course, what I _really_ want to end up with is an image that _is_ in fact a rectangle, but everything outside of my selected oval has to end up being painted total white (255).
This is a strictly B&W image, BTW... just like all really old family photographs everywhere. How to fade the edges of the oval slowly to white.
I figured out how to use the layers option to fade an image into white for a Blackberry theme I'm making. After getting the hang of that, I figured I could try the same thing with a different image. But instead of opening up both images in different colors, both show up as the color of the first image. Both images are png files, the same file format that I used the first set of images for. I have not changed the size nor made anything transparent.
View 2 Replies View RelatedI am trying to make my image fade to black on one side. I have read the blend tool tutorial in the user manual but all I can get to hap pen is a black and white gradient completely covering my image. I have tried adding a transparent layer over the image and applying the gradient to it but for some reason when one side of the image (using the linear mode) starts to get darker, the other side gets lighter, creating a severely distorted contrast with the image, plus the fade covers an entire half of the image.
View 1 Replies View Related
