AutoDesk Smoke :: Colour Shift On Importing RGB Uncompressed QT

Jun 25, 2012

I have a job done in Smoke 2012 Subscription Advantage Pack and exported an RGB uncompressed QT. I can pull this pack into the same software version on any of the other 14 Smoke on macs I have and it is exactly the same as the original. I have installed the new bug fixed Smoke 2012 Subscription Advantage Pack2 and this same clip comes in with a large colour shift. The whole image is about 10% darker! I have exported the same clip as YUV2 uncompessed QT and also a TARGA sequence and pulled these into both software versions and it is identical to the origianl. NO CLOLOUR SHIFT.

I also have 2013 beta version and I'm getting the same colour shift.

Have you done something to the colour management of RGB Uncompressed QT's in your newer software releases.

All my masters source files have been RGB uncompressed QT's for years and this is now causing big concerns.

View 5 Replies


ADVERTISEMENT

AutoDesk Smoke :: Difference Between Uncompressed And Legacy Configuration

Jan 29, 2013

When creating a new project, what's the difference between "uncompressed" and "legacy configuration?

View 5 Replies View Related

AutoDesk Smoke :: Gamma Shift In Resize Node?

Mar 1, 2013

Whats up with the gamma shifts in the resize node? I have never noticed it before but it is killing my current comp.

View 2 Replies View Related

AutoDesk Smoke :: Paint Causing Luma Shift?

Apr 4, 2013

On the new smoke for mac however, I am getting luma shifts after doing a lot of reveal/cloning backgrounds etc.

This does not happen all the time, and not consistently, I find if I paint for a while and go back and forth, the image becomes much darker, not always the entire clip, sometimes just the frame I'm painting.

View 5 Replies View Related

AutoDesk Smoke :: Flame Hot Keys Equivalent Of SHIFT-D-F13 Debugger

Oct 3, 2012

Flame hot keys equivalent of SHIFT-D-F13 debugger

2012 SAP2 SP3
10.6.7
Kona 3G driver 10.3.2
Quadro 4000 driver 256.01.00f03
Cuda driver 4.2.10
Mac Pro (mid 2010)
12 Cores / 24 Gigs
CalDigit HD Pro2 (8TB, 723 MB/sec read)

View 6 Replies View Related

AutoDesk Smoke :: Importing And Using Alpha Channels In Autodesk

Oct 2, 2012

I am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.

1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?

2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?

View 7 Replies View Related

AutoDesk Smoke :: Colour Source On Timeline?

Jul 25, 2012

Where colour source on the timeline is. I am always droping black or coloured frames into the timeline either as a background for some softFX text or even as a fill for the softFX text so I can then track that text to the background.

View 9 Replies View Related

AutoDesk Smoke :: Importing TWs To Smoke

Jan 10, 2014

Whats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?

View 1 Replies View Related

AutoDesk Smoke :: Colour Correcting And Grading With Keying

Feb 14, 2013

When keying a shot over a background I find that if I then want to colour grade the foreground that it affects the quality of the key as it's obviously applying the colour change before the key.

I would colour grade first but that doesn't suit the workflow the director wants to use.

View 2 Replies View Related

AutoDesk Smoke :: Importing MTS Files

Jun 12, 2012

Since the aim of this pre release is to squash bugs there is another thing I found out so far:

The media library crashes when I enter a folder containing .MTS files (AVCHD file container for the Pana AF100 & Sony FS100 for example).

I think these medias should be transcoded automatically since it's a popular codec right now but unusable for edit.

View 3 Replies View Related

AutoDesk Smoke :: Importing M2T Files

Jul 17, 2013

The shop where I work shoots with Sony HVR z7u cameras.  The small memory recording unit on the back of the camera records m2t files.  Smoke does not seem to recognize these files natively.  (Neither did FCP without a downloadable Sony driver).   Is there a recommended workflow for dealing with m2t files?  

View 4 Replies View Related

AutoDesk Smoke :: Colour Correct Versus Color Warper

Nov 12, 2013

what is a better tool?
 
A Colour Correct
 
B Colour Warper
 
Are both capable of delivering the same result? Is the underlying tech the same on both and its only a matter of UI?

Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM

View 2 Replies View Related

AutoDesk Smoke :: Importing PNG Files With Alphas

Nov 2, 2012

I have png files with alphas sometimes Smoke will import them as a still frame that I can change the duration of . Other times it will import it with 23.98 time code and then I have to freeze it to extend the duration.

View 4 Replies View Related

AutoDesk Smoke :: Importing 4k Material Via Backburner?

Jan 23, 2012

I just imported a bunch of 4k clips via the gateway using the backburner. Is it normal that it took about 2 minutes per frame to render? I had 36 clips, 53 000 frames in total, and it took about 8 hours to get them all in (with store local copy and proxies turned on).

Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)

View 1 Replies View Related

AutoDesk Smoke :: Importing TIF Image To Timeline?

Jan 29, 2013

Graphics import into the library with a default length of 1 frame. Is there a way to lengthen that so I don't have to zoom way in to grab the edge of the clip?

View 1 Replies View Related

AutoDesk Smoke :: Copy / Paste Colour Swatches Or Save Them To Palette?

Apr 17, 2013

Is there a way to copy/paste colour swatches or save them to a palette?

View 5 Replies View Related

AutoDesk Smoke :: Process Of Importing Alexa Material?

Apr 11, 2012

Where can I find some info on the process of importing Alexa material to Smoke? Is it as slow as RED material? I need to Color Correct 10 min of 2k material from that camera.

Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM

View 2 Replies View Related

AutoDesk Smoke :: 2012 SP3 Crash On Importing Files?

May 29, 2012

Any time the gateway scans a directory, which has a clip that has stereo audio, Smoke hangs. Is this a bug? Specifically the file was a Canon 7D file which had audio recorded with it. The crash does not happen when we try a file without audio or a file whose audio has been converted to mono. The file was directly from the camera. Same thing happens when it is a Prores HQ file with Stereo audio.

View 9 Replies View Related

AutoDesk Smoke :: Importing Corner Pin Data From Mocha Pro?

May 24, 2012

I'm testing Mocha with Smoke Advanced and have run up against a problem.When I import the corner pin data from Mocha for a mobile phone screen, there is a significant offset for each corner.

Mocha support have been very useful, and the problem is not to do with aspect ratio or frame size. The track looks perfect inside Mocha.I've followed the exact process featured in the link below.

[URL]

View 8 Replies View Related

AutoDesk Smoke :: Importing R3d Files To Project Reel?

Apr 15, 2011

when i import r3d files to a project reel, will it create a file in project or it will only take the original red file?

is there any way to do the soft import r3d files?

what is the native support means?

View 7 Replies View Related

AutoDesk Smoke :: Importing / Changing Frame Rates

Sep 17, 2012

I have a QT at 14.97 fps. By default Smoke imports it as 25 fps and so changes the duration.

Can I either import it without changing duration or change once it's in?

View 3 Replies View Related

AutoDesk Smoke :: How To Get Time Estimate On Backburner Importing

Dec 4, 2012

Today I was messing around with import. Tried to pull in 100GB of footage and found it took nearly 1hr 45 mins over USB3. I know the slow speed was down to the rubbish hard drive I was pulling from but it would have been really useful to know that it was going to take 1hr 45mins. I could've gone to the pub!

We get a time estimate on backburner importing? I also wanted to check that smac 2013 isn't throttled anywhere on import speeds? I know that smoke all the way up to 2010 vsn was throttled so that you would never get import as fast as your disks could go.

View 3 Replies View Related

AutoDesk Smoke :: Importing And Caching Media In ProRes 422

Feb 13, 2013

I've been running the trial for a week with no problems importing and caching media in ProRes 422. Today when I booted up smoke I attempted a similar practice run with importing some random clips and playing around again and noticed that nothing was getting cached. When I clicked import it said it could not connect to backburner on port 0.

There appear to be a couple of threads regarding this issue where people lose the ability to cache media or export using backburner. I followed a thread posted here: [URL] ....

I tried restarting backburner, restarting the mac, reinstalling smoke and attempted the "clean install" script that is listed in the article above. After I performed the terminal commands and reinstalled Smoke, it connects to backburner but now in the jobs tab/backburner manager says it is waiting (occasionally switches to "busy" for a second or two).

Here's the error I get in backburner manager:
Matthews-MacBook-Pro.local 1946321280 swBIOSubJobServer.C:385 02/13/13:16:23:24.347
1946321280 swBIOAdapter.C:454 02/13/13:16:23:25.403 Cannot process tasks 0... in /var/tmp/WireJob/SubJob0
Unimplemented feature while reading source frames

I'm running Smoke on an internal SSD and my framestore is also on an internal HDD, but I can't imagine that's an issue since I had already successfully imported media before.

I also attempted to export a sequence of soft imported footage (also failed). The error is below:

Matthews-MacBook-Pro.local 2893642280 transcoderMediaProvider.C:312 02/13/13:16:56:30.268 Cannot get type of clip IFFFS-16:/stonefs7/Stinkzone/workspace/Media Library/_Export_130213_165628_1/H_16777343_S_1360792589_U_170633/hires: Project Stinkzone not found

View 1 Replies View Related

AutoDesk Smoke :: Importing Still Images - Mediahub Only Read 2 Or 3 Files

Jun 11, 2013

Trying to import some still images into Smoke 2013. There are 15 files, all from the same source, all the same format (.png), however, when I open the folder in the mediahub, it reads 2 or 3 of the files and nothing else. The other files are in the folder and are no different than the ones Smoke does read, yet for some reason the other files are nowehere to be found through the mediahub. This isn't the first time I've had something like this happen.

View 1 Replies View Related

AutoDesk Smoke :: Unable To Get Preview When Importing 3D Model / Choosing A Font

Jul 26, 2013

When doing a import of 3D model or choosing a font, I don't get preview, just a bunch of empty thumbnails... why... and how to update. 

View 3 Replies View Related

AutoDesk Smoke :: Importing A Slate With Soft Text Effect From 2012

Feb 15, 2013

This has happened repeatedly for me, importing a slate with soft text from 2012 corrupts my default library. I get-

"The following bins are corrupted: Default Library Choose recover or hit the Enter key to try and recover a backup version of the bins."

Recovering fails and I'm forced to hit cancel which let's me into the project with my media gone.

View 1 Replies View Related

AutoDesk Smoke :: Importing Huge Maps To Create Pan And Zooms - Max File Resolution

Mar 1, 2013

I have this HUGE maps I have to import to create pan and zooms. The file is a PNG with a resolution of 25000 x 16400px. Smoke doesn't play nice when I import this dil. It's all black and won't render. If there a max file resolution in Smoke? Or is it a problem with PNG files? (I tried with PSD adn it did the same).

View 3 Replies View Related

AutoDesk Smoke :: Caching Hangs On Waiting When Importing With Cache Source Media Selected

Mar 27, 2013

Although rendering seems to work when I try to import media with cache media selected and link to source media unselected the jobs queue just shows the status 'waiting' on the imported clips.

View 9 Replies View Related

Lightroom :: Colour Shift On Re-import From PS (13.0.1) To Windows?

Oct 16, 2012

I've got strange subtle color shift from reds to yellows when I'm doing the following:
 
1) import my raw files as DNG into LR

2) edit them in LR

3) ctrl-E them to edit in PS

4) edit them in PS (just drawing a dot with the brush tool somewhere, so the file could be saved and re-imported to LR)

5) save (not "save as") them in PS which bring them back as tifs to LR
 
This final tif from PS has some color shift in comparison to the original DNG file. Nothing is edited in PS.
 
Furthermore:

- if I'll open to edit the resulted tif with the color shift in PS once again with the option to use LR adjustments, I'm getting color shift in PS

- if I'll open to edit the resulted tif with the color shift in PS once again with the option to open the original tif without LR adjustments, I'm getting correct color in PS, as in my original DNG
 
LR - ProPhotoRGB
PS - ProPhotoRGB

View 18 Replies View Related

Lightroom :: Colour Shift From Snow Leopard To Lion

May 1, 2012

I initially noticed this problem within Lion and Lightroom 4 when printing to my Epson 4800. The colour shifts to a more pinkish hue in prints done in Lion. I'd originally thought this was unique to Lightroom, but the same thing happens to the same file when printed in Preview, so I'm assuming it has something to do with Lion or the Epson printer. I can confirm it's not a monitor calibration issue, and that my printer driver for the 4800 is the one for Lion, and that everything in Lightroom and the driver is configured identically in both versions of the OS.

View 1 Replies View Related

Lightroom :: Colour Shift Between Develop Module And Library

Jan 25, 2012

I'm running LR3.6 on XP SP2 with a wide gamut NEC PA241W monitor (calibrated). I haven't noticed a problem before, but just noticed  a colour shift on shots of autumn golds and yellows. I get the image how I want it, working from the raw file in the Develop module, then switch to the Loupe view in the Library, where it looks less saturated. This is still viewing the raw file, not an exported file, so it should still all be working in the internal ProPhoto colour space?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved