Flame hot keys equivalent of SHIFT-D-F13 debugger
2012 SAP2 SP3
10.6.7
Kona 3G driver 10.3.2
Quadro 4000 driver 256.01.00f03
Cuda driver 4.2.10
Mac Pro (mid 2010)
12 Cores / 24 Gigs
CalDigit HD Pro2 (8TB, 723 MB/sec read)
Is it possible to run Flame or Smoke over a VPN? I mean, is it possible to get a license over VPN?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
I just found the tool map convert and found out, that it's able to create a cube with different faces. But now I'm wondering, is there a way to combine this somehow with action to create a 3D cube with different clips playing on each face?Also, I don't understand why the faces are not editable in the map convert menu. It only says that face 1 is the bottom and so on.
View 3 Replies View RelatedWe are trying to share files between a Smoke 2013 E1 and a Flame 2013. I can see Flame from Smoke but no the other way around. I can see flame´s projects but cant see any clip. I can see flame´s clips from Safari using Wiretap Central. Are these applications compatible?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
I know in the smoke 2012 on OS X you were able to set your keys as Flame. Is this possible in Smoke 2013 beta 5 ?
Also, when in connect FX can you make a hotkey for pan and zoom ? Seems silly that you would have to change that manually every time but I am sure it is user error.
just tried to get access to a Flame Framestore via Wire/Network but unfortunatly I only see the Harddrive, not the Framestore.
I would love to load some conformed stuff from the Flame.
Is this not yet implemented or is there some special setting I have to change either on the Flame or SMAC? (SMAC 2013 prerelease on MBpro)
It would seem that when I restore an old archive and enter the batch fx that all the media is correct, all tracking etc is correct but the keyer is inaccessible and all keys are defaulted to luminance of the input. I can't enter and edit them at all.
I also tried restoring to a new project which I setup with the legacy option selected. Am I missing something or is this not supported in pr4?
can 2012 open a flame 2013 file archive
View 2 Replies View RelatedWhats up with the gamma shifts in the resize node? I have never noticed it before but it is killing my current comp.
View 2 Replies View RelatedOn the new smoke for mac however, I am getting luma shifts after doing a lot of reveal/cloning backgrounds etc.
This does not happen all the time, and not consistently, I find if I paint for a while and go back and forth, the image becomes much darker, not always the entire clip, sometimes just the frame I'm painting.
I have a job done in Smoke 2012 Subscription Advantage Pack and exported an RGB uncompressed QT. I can pull this pack into the same software version on any of the other 14 Smoke on macs I have and it is exactly the same as the original. I have installed the new bug fixed Smoke 2012 Subscription Advantage Pack2 and this same clip comes in with a large colour shift. The whole image is about 10% darker! I have exported the same clip as YUV2 uncompessed QT and also a TARGA sequence and pulled these into both software versions and it is identical to the origianl. NO CLOLOUR SHIFT.
I also have 2013 beta version and I'm getting the same colour shift.
Have you done something to the colour management of RGB Uncompressed QT's in your newer software releases.
All my masters source files have been RGB uncompressed QT's for years and this is now causing big concerns.
Any way to scrub the audio in the timeline using the arrow keys or the sequence positioner? Also, with "Snap" on, is it possible to have the positioner snap to a marker in the timeline?
View 2 Replies View RelatedUsing CS6 on Windows 7 and Illustrator has decided not to acknowledge my Ctrl key, Shify key or space bar.
I have tried resetting Illustrator and even deleted the App data files but it didn't work. I found people with similar problems but never a solid solution. I even uninstalled evernote when some person said that worked for them.
At the moment if I try to undo I get the Zoom tool and I can no longer save with Ctrl + S, I can't bring up the hand tool with space or use any of the more common shorctcuts. This problem only affects Illustrator in all other programs the keys work fine, including other programs in CS6.
I know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies View RelatedIs there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies View RelatedWhat is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies View RelatedI am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.
1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?
2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?
i am using CAD2010 & VS2012.
start external program done and no problem with attact to process.
i set breakPoints in my program then i loaded it to autocad using netload so this breakpoint doesn't work , and my program complete all code without stop at my breakpoint .
Can Smoke support the OFX architecture?
View 1 Replies View RelatedDoes Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?
View 3 Replies View RelatedWhats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?
View 1 Replies View RelatedI've just installed GIMP to see if it can replace Photoshop for me. But I experience some weird troubles. When I try to use the text tool I can't type anything because all the keys acts as shortcut keys. Aren't these supposed to be overridden when using things like the text tool? I also have the same problems with dialog boxes. The tab key is used to hide toolbars, but when I open dialog boxes I would rather want to use tab to jump from one input box to another. Plus I couldn't enter numbers because the number keys was shortcuts for zoom level.I guess I'm just doing this all wrong? I'm on OSX Maverick.
View 5 Replies View RelatedI tried Smoke 2013 PR2 on my MacBook Air 11".
It uses all the available RAM that is 4GB.
Same experience with Smoke 2012 on my MacBook pro 13"".
Is that normal?
I have RED footage which I exported as EXR. When I import them back in, they look exactly like the RED footage. But when I import the EXR in Fusion, export it back out, and then import that EXR into Smoke, it looks brighter, although I didn't change anything in Fusion. (when I compare the EXR from Smoke and the EXR from fusion in my finder on my desktop, they look exactly the same). So what is Smoke doing with the "foreign" exr on import?I was also playing with the LUT settings. I get a result which is close, but I need to be exact.
View 6 Replies View RelatedWhere do you set context in batch in the 2013 prerelease?
View 9 Replies View RelatedWhen I export a XML from FCP 7 all of my files come over and link but there is no video with my HDV files (1440 x 1080) all of my other files (Canon FX etc) come over fine.
View 9 Replies View RelatedWhat is the best way to downconvert 5D HD to SD?
I converted the h.264 files to uncompressed 10bit. Bringing in the footage and XML was fine, but as soon as I resize to PAL (the timeline was changed to PAL, as was the output on the AJA) the picture starts anti aliasing in detail areas. I have processed this with every filter in Smoke with no satisfactory result.
I am having issues for a long time regarding importing XML into smoke 2013. Will try and explain you in breif.
First When we try an import XML into smoke it just doesnt do anything, in the message history box it comes up saying FOUND 0 SOURCES.
Nothing gets imported at all. No footage is imported, nothing is shown in timeline as well.
Second For a different project when the XML does get imported, the videos get imported but then again nothing is coming up in the timeline and in the message history box we get the following error.
XML Validation Failed.
Cannot process unliked media.
we have checked all the import options to make this work, including max up level and the rest but nothing is working.
I must have changed a setting because today my interactivity in CFX has taken a hit, specifically when making Axis moves. The move doesnt register until after I have made a change in the Axis field.
I know there is a setting for this but cannot remember. Am not having the same issue grabbing Axis in viewer.
I'm currently trying to conform an XML from FCP 7 into Smoke 2012 (Linux). The issue I have is that the files I want to conform with are MFX, however the files used in the FCP timeline are PRORES, therefore have a '.mov' extension. This means the Smoke is not seeing the MXF files due to the extension & the only way around it I have found, is to edit all of the '.mov' extensions to '.mxf' extensions in the actual XML. This works well, but is a complete nightmare, particularly as I'll have to do this for 13 half hour episodes!!!!
I have tried all the different combinations of Filename, Timecode, Tape, etc, but none work due to other metadata issues from the filming of the footage to it being delivered to our edit suites!!!!
Any way of making the Smoke ignore the file extension?
Can i remove the fx history ? for example i render a cfx clip. then i want to keep the render only and disconnect the relationship with its 'cfx history' . And is there any practical benefit of it ? You maybe will ask me : 'why do you wanna do it?' , my answer is " i don't know man, it just came across my mind .
View 3 Replies View Related